Springfield XD Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
368 Posts
Discussion Starter #1
I tried to take my XD Tactical 357 sig apart tonight but couldn't figure out how to get the striker pin out. I got the striker locking plate (end plate) off and removed the striker spring guide, striker status indicator and striker spring, but I couldn't get the striker itself out -- what's the secret to doing that?

Is there an online reference to complete teardown and reassembly of the XD? Illustrated would be nice...


Brian
 

·
Premium Member
Joined
·
2,737 Posts
You have to remove the striker retainer pin, which prevents the removal of the striker. Be careful (normal care) that you don't collapse the pin on itself when you drive it out.
 

·
Registered
Joined
·
14,586 Posts
You have to remove the striker retainer pin, which prevents the removal of the striker. Be careful (normal care) that you don't collapse the pin on itself when you drive it out.
"don't collapse the pin on itself when you drive it out" from the bottom with the slide off the frame.
 

·
Premium Member
Joined
·
2,737 Posts
1 - 5 of 5 Posts
Top