Springfield XD Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter #1
I have a XDM-40-3.8 that the trigger is sticking. I had SP do a combat carry trigger job in January. I clean after every range time; I have used M-Pro 7, Hoppes 9 and Break free Clip. I let it set for one hour than work the trigger while spraying with canned air, it was still sticking so I tried letting it set overnight and it still sticks. So I used the pressurized canned Remington oil to oil everything and it still sticks.

Is this a cleaning problem or something else?:confused:
 

·
Registered
Joined
·
538 Posts
Not exactly sure what you mean. Is the trigger sticking in after it is pulled? Or is it kinda wonky as you are pulling it? It might be that something on the inside is impinging part of the trigger mechanism, but from what I have heard SP does impeccable work. Did it ever have this sticking issue before you sent it out? My first reaction would be to say maybe the inners have gunked up in some way.

Wanna post some pics, might help the diagnostic process?
 

·
Registered
Joined
·
4,435 Posts
I have a XDM-40-3.8 that the trigger is sticking. I had SP do a combat carry trigger job in January. I clean after every range time; I have used M-Pro 7, Hoppes 9 and Break free Clip. I let it set for one hour than work the trigger while spraying with canned air, it was still sticking so I tried letting it set overnight and it still sticks. So I used the pressurized canned Remington oil to oil everything and it still sticks.

Is this a cleaning problem or something else?:confused:
Call springer precision and talk to the man!

If there is something wrong with the work they did they will fix it.

If you are comfortable in taking it apart then do that first, check for crud that you can remove.

don
 

·
Registered
Joined
·
27 Posts
Discussion Starter #4
I did not think it was SP work. I used some slide-glide lite and I think this is what got into the trigger makeing it stick. The gunked up trigger is now runing great again after three cans of air, alot of M-PRO 7 cleaner and oil. Thank You:)
 
1 - 4 of 4 Posts
Top