Some of you may have seen where I posted that I took my RIA out last week to the range and came home with a bloody hand. Hammer bite..not once, but twice. This was the second time I had it out to the range, the first time out I never got "bit" but the second time out...yea, after the second bite I put the 1911 away.
I am looking for a way to remedy this. I noticed that if I hold the gun high enough to get a thumbs forward grip on it the grip saftey that is currently on the weapon is slightly dug into the pad of my hand where the hammer comes back. However, if I lower my grip I can not get a proper thumbs forward grip. This has lead me to beleive that a new grip safety is the most logical solution...which leads me to my question.
What grip safeties will fit these or are they all interchangable? I love shooting this 1911, but got to admit the bite makes it a little less than fun...
Which model do you have? In almost a 1000 rounds through my tactical I have never had that type of issue. The left side of the ambi safety does tend to dig into the thumb on my right hand, but, thats about it. The tactical has a high rise beaver tail though.
Which model do you have? In almost a 1000 rounds through my tactical I have never had that type of issue. The left side of the ambi safety does tend to dig into the thumb on my right hand, but, thats about it. The tactical has a high rise beaver tail though.
Its the RIA 1911 A1. The beaver tail on it almost curves back down at the point of it...this is the best pic I have of it right now. I can post a better one if needed when I get home from work...
lol...like the look and feel of it...and the grip safety, however I am now learning that it probably was not the best of choices. Still a sweet pistol, but man after getting bit by it twice...not so sure. Def need to get that switched out!! I just don't want to get something and have it not fit...I don't need anymore headaches lol...
I think you have a nickel RIA, you could get a blue WC and have it nickel plated but a polished stainless would work too, anyways these may help, the guys vid is a little long but pretty good, you won't have to grind on frame, just careful installation and safety checks as described, your govt hammer may bite the grip safety a little but that's a nice well on this WC sort of drop in part. Good Luck Colt 1911 Wilson "drop-in" beavertail grip safety installation - YouTube
Thanks for the video. I have had this thing torn completely apart, the day I got it I took it home and tore into it...kind of a thing I have I guess, a "getting to know you" thing. They are pretty simple, just want to make sure that what I get will fit it...
All is not lost. The beaver-tail grip safety was designed to address this problem as well as get the hand higher into the pistol for better control. In the attached image is a Series 70 Colt that has had the grip safety tang and pistol tang rounded off to get rid of sharp edges, and the hammer has been bobbed slightly. This was done after a Cooper course back in the eighties in which I finished the last day with the web of my hand bloody and heavily bandaged because of the sharp edges and hammer bite. I think the hammer could be bobbed a bit more, as my fleshy hand sometimes still gets snapped by it.
Just goes to show to each their own. lol I never liked that model. You could fit it yourself if needed. I did my own fitting on my XDm 5.25, which was minor. Was a good learning experience. When I first got my tactical, I tore it completely down. Good thing I found some pics of the exploded view otherwise I would have been in trouble.
All is not lost. The beaver-tail grip safety was designed to address this problem as well as get the hand higher into the pistol for better control. In the attached image is a Series 70 Colt that has had the grip safety tang and pistol tang rounded off to get rid of sharp edges, and the hammer has been bobbed slightly. This was done after a Cooper course back in the eighties in which I finished the last day with the web of my hand bloody and heavily bandaged because of the sharp edges and hammer bite. I think the hammer could be bobbed a bit more, as my fleshy hand sometimes still gets snapped by it.
I like the middle and far ones!! LOL they totally block the hammer from your hand to where that damn hammer, sharp teeth and all, has no way to get to your hand...
Another question...are the hammers interchangable? Thinking about swapping out the hammer and beaver tail to something like what is pictured in the above post...any thoughts on doing this on this model?
Another question...are the hammers interchangable? Thinking about swapping out the hammer and beaver tail to something like what is pictured in the above post...any thoughts on doing this on this model?
Definitely check out the Ed Brown beaver tail. Considered by many to be the best. Ed also makes many other very high quality components for the 1911. Ed Brown Products, 1911, parts
Either bobbing the hammer or the Wilson "drop-in" grip safety are the only viable options for someone not familiar with the 1911. All other "beavertail" safeties require cutting the frame and ANY new hammer will need to be matched to the sear.
A beavertail type safety is the best way to go but if you can completely disassemble the frame and remove the hammer, just cut or "bob" the hammer by an 8th of an inch or so and round the edges and either cold blue it for looks or use a blueing pen to darken it until you can afford to replace it.
P.S. I see you got the parts. Good choice. Just make sure you have them fitted by a good Smith. Dont be fooled by some of the "drop-in" claims. Its much more critical than that in a 1911.
If you want to go with actual RIA parts check advancedtactical.com. I do not see a stainless beavertail grip safety but they have them as well as the hammer and skeletonized trigger. Also from what I've heard of these guys on some of the 1911 forums they do great work at good prices.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Springfield XD Forum
5.7M posts
123.3K members
Since 2001
A forum community dedicated to Springfield Armory XD and XD-M series firearm owners and enthusiasts. Come join the discussion about optics, gunsmithing, styles, reviews, accessories, classifieds, and more!