Springfield XD Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
141 Posts
First off, keep looking for something else. There have been A LOT of reports that the Galil hand guard will get flimsy after you fire a bunch of rounds through it. I dont even think it has a internal heat sheild. It is cheap. Almost anything for a AK from Tapco is cheap. If it has to be Tapco, I would recremend the "fusion" forend. It has a heat sheild and seems to be vented better. I have that on my WASR but it will be replaced as soon as my UTG and ACE stock arrive. But it should be fine as for the fit. The top guard is easy to get off. You need a cresent wrench, and some oil. Fit the wrench to the flat sides of the metal front peice, and rotate the wood downward. If it will not budge, use a little oil on the edges of the wood and let it seep down. And try again. Good luck.

Removal instructions- Romanian Kalashnikov Rifles
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top