Springfield XD Forum banner

prp

  1. New XD-M OSP

    XD-M Discussion Room - XD(M)
    Hi All, It's been a few years since I've posted here, but I just picked up a new OSP 4.5 (my 4th XD-M) and I could use some input. My new one is a black 9mm with the standard and threaded barrels, along with three optic mount plates and suppressor height sights. It will eventually replace my...
  2. Best trigger weight for carry/self defense

    General Springfield XD/XD(M) Talk
    I just sent my XDM OSP 10mm to PRP for all the goodies. My question is what trigger weight are you guys using. I specified 4 pounds (I always thought you wanted about 4.5” for a non safety carry gun) but I can go down to 3# I think for the carry trigger. Thinking I should maybe go down to...
  3. Light strikes in my XDS

    XD-S Discussion Room
    I recently installed a PRP full trigger kit into my XDS 9mm 3.3” (first gen). Going into it, I had read that some people had to revert to the OEM striker spring due to light strikes, but I wanted to try it out anyway. The trigger pull with the full PRP kit was indeed noticeably improved. The...
  4. Aimpoint Acro P-1 Powder River Precision FAIL

    Springfield XD/XD(M) Range Reports
    So I finally got ahold of an Aimpoint Acro P-1 red dot. I got it a day before I received my mount from Powder River Precision. I was very excited to get this mounted on my XDM OSP in 10mm. Turns out it doesn’t fit. These numbskulls milled the part wrong. Not only do they charge $60, closer...
  5. (Houston) PRP Ultimate Match Trigger kit for XDm 9mm/.40

    XD Accessories for Sale
    Hey all, I have a PRP Ultimate match trigger kit up for grabs. This kit is used and has been installed in a 9mm XDm 4.5". I bought the gun used with the trigger kit already installed but took it out and put the stock parts back in. Here's the link to the kit: PRP™ Ultimate Match Target XDM...
  6. How many shots before trigger upgrade?

    Springfield XD/XD(M) Accessories
    Hi, i own a XDM9 since a couple of months and i want to change the trigger to PRP Ulitmate Match Target Trigger. At the range I was told that I need to shoot at least 1000 rounds with it before I swap the trigger or someone else told me that I have to shoot with the stock trigger until I have...
  7. XDM 3.8 vs Commander 1911 for CCW? Help Me Choose!

    General Springfield XD/XD(M) Talk
    Hi folks, I'm looking at an XDM 3.8 for my EDC, coming from a Cajunized CZ P-01. I have a whole writeup where I compare the XDM to about 15 other pistols I got my hands on here: Help me choose a new CCW pistol! **UPDATE** • r/CCW It is a long read but will get you fully up to speed. TL;DR is...
  8. Xds Grip safety issues after prp

    XD-S Discussion Room
    I recently installed the prp spring and sear kit. My current problem is when the grip safety is engaged the trigger wont engage however when the grip safety is not engaged the trigger will fire. What did i do wrong?
  9. Powder River Extractor Issues?

    Springfield XD/XD(M) Accessories
    Has anyone had an issue with powder river precisions after market extractor? I installed their extractor (which is a bit longer than the stock part) and have had 3 failure to eject in about 600 rds. The end result is a round partially pulled from the barrel and the slide stuck open from pushing...
  10. Slide moves down when trigger is pulled.XDM.(New PRP trigger)

    XD Gunsmithing and Maintenance
    Hopefully this is the right place for this. I am new to the forum. I purchased and installed the PRP Ultimate easy trigger. After installation, i noticed that when dry firing, the rear bit of the slide drops down slightly. I do not recall this occurring with the factory trigger and it does not...
  11. XDM OSP

    XD-M Discussion Room - XD(M)
    Finally got everything put together. PRP extreme trigger kit, Don's SS guide rod, threaded Stormlake barrel. Will be shooting Monday or Tuesday. Pictures next to G19 for reference. Dremel mod on the trijicon hardware. Any recommendations one blacked out suppressor height sights? Maybe tritium...
  12. New member

    New Member Welcome Center
    Hey guys new to forum as far as membership goes. Not new to firearms. Current pistols include Colt 1911's, xdm 9 and 40, xd 45 original and mod2, glocks 19/17, sig p229/p226, colt woodsman, h&k vp9, h&k usp, wanting a Dan Wesson Valor in duty black and currently looking at a p227 tactical as...
  13. New PRP disconnector

    XD-S Discussion Room
    Has anyone else heard of this? I spoke with Daniel at PRP and he is sending me 2 to try. He said it will keep trigger pull in the 5 lbs range with stock striker spring. I already installed the kit with sear. He said they are just developing this new disconnector.
  14. Excellent Customer Service from Powder River Precision (PRP)

    General Springfield XD/XD(M) Talk
    I was doing some trigger polishing on my XD-S the other night, and I accidentally bent the grip safety pin while reassembling the pistol. The grip safety spring somehow moved as I was inserting the trigger and sear assembly back into the gun, so when I started hammering the grip safety pin in it...
  15. Xds Spring kit from Powder River Precision

    XD Accessories for Sale
    New and unopened XDs spring kit from Powder River Precision. $20 shipped Paypal accepted.
  16. XDS 45 New PRP Kit with Sear

    XD-S Discussion Room
    Anyone out there have experience with PRP's new kit ? My post-recall manufactured XDS 45 3.3 has a whopping 9.75 lb pull, so I'm investing my 65 bucks...hopefully will get it down to 5 lbs or so.
Top