So today, I got bored, very bored. I went to walmart, bought some primer, some textured paint and sand paper. Now, the stock I have isnt in the worst of conditions. But I dont care too much for the wood look. Unless its a really nice piece of wood. Also, if this was a higher dollar gun and stock, I wouldnt be doing this. Its a good working Mossberg 800a 308. I started out by sanding off the glossy finish with a 100grit paper, then washed it, then sanded with 220 grit, soft as a baby's back side, washed it again. I'm using a white primer, and then a dark gray and speckled white, textured finish. I'll post pictures probably tonight tomorrow when its finished. Has anyone else done this with a wood stock?