Digital scale help

Discussion in 'XDTalk Chatter Box' started by robinsre, Nov 26, 2008.

  1. robinsre

    robinsre XDTalk 4K Member Founding Member

    Joined:
    Jul 24, 2006
    Messages:
    4,154
    Likes Received:
    13
    Trophy Points:
    38
    Location:
    Reno, NV
    Ratings:
    +13 / 0
    Anyone got one of these digital scales?

    Cabelas XT1500

    Cabela's XT 1500 Digital Scale

    I seem to have misplaced my intsruction manual?

    Can anyone help me calibrate it?

    - Ryan
     
  2. itsthescizzy

    itsthescizzy XDTalk 100 Member Founding Member

    Joined:
    Jun 25, 2008
    Messages:
    322
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    WA
    Ratings:
    +0 / 0
    ounces,quarter pounds, lbs and kilos........ah!
     
  3. Qman

    Qman XDTalk Newbie

    Joined:
    Feb 15, 2008
    Messages:
    25
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    San Diego, CA
    Ratings:
    +0 / 0
    1. Calibration
    a) With the scale turned on and without any weight on the pan, press and hold the "TARE" button until 'CAL-0' is showing.
    b) Press the "TARE" button again. The '0' in 'CAL-0' will begin flashing.
    c) When 'CAL-F' is shown, stack the two 50g weights on the center of the pan and press the "TARE" button. The 'F' in the 'CAL-F' will flash.
    d) When 'CAL-0' is shown again, remove the test weights and press the "TARE" button. The '0' in 'CAL-0' will flash.
    e) When the calibration is finished, the scale will reset.

    NOTE: If an error occurs in calibration, the scale will try to re-do the calibration starting from step (b).

    That was verbatim from the manual i got.
     

Share This Page