Effect range on my scope - XDTalk Forums - Your HS2000/SA-XD Information Source!

Lazarus · 03-30-2007, 06:25 PM

I was tooling around with my scope because the wife is gone and I dont wanna do the work she left me and was wondering whats the effective range on it. Here are the specs:

Model:		510514

Finish:		Black Matte

Description:		4 x 32

Field of View (ft. @ 100 yds):		23.6

Eye Relief (inches):		4.25

Exit Pupil (Millimeters):		8

Weight (ounces):		8.8

Click Value (MOA):		1/4

Adjustment (Range):		70/70

Reticle:		Truplex

Parallax Settings:		100 yds

I dont know much about scopes and this one came with the rifle so it cant be that bad but how far would you say its good for?

jeff221 · 03-30-2007, 07:17 PM

It's 4x magnifacation, but your question is a difficult one because i tall depends on what the size of the target is...

I'd say you could run this scope at 100 yards if you were a good shot.

Lazarus · 03-30-2007, 07:31 PM

Quote:

Originally Posted by jeff221

It's 4x magnifacation, but your question is a difficult one because i tall depends on what the size of the target is...

I'd say you could run this scope at 100 yards if you were a good shot.

Ok. Say the target is a regular NRA? paper target. What are they? 10x10? 12x12? I actually took it out to a 100yrd range with targets that size but I didnt sight it or go get the targets so I dont know how I did but it wasnt terrible to use at that distance.

I wonder what kind of scope I'm going to need for my 10FP out to 400-500yrds?

Don · 03-30-2007, 08:32 PM

400-500 should be fine. Try it first and then decide.

With a 9x at 380 yds on a 4" box, I could set the crosshairs on the left edge, the center or the right edge with no problems. Not saying I could hit there, but I could resolve there.

What is a budget if you are looking at other scopes? SWFA has a forum with lots of reviews and comparisons. SWFA prices are not bad, but if you decide on a scope you can sometimes get better prices elsewhere, however their customer service is very good. I have three scopes from them. Pick up Butler Creek caps while you are at it whatever you do, they keep your lenses protected.

sloan1919 · 03-30-2007, 08:47 PM

Quote:

Originally Posted by Lazarus

I was tooling around with my scope because the wife is gone and I dont wanna do the work she left

lol

Lazarus · 03-30-2007, 08:52 PM

Quote:

Originally Posted by Don

400-500 should be fine. Try it first and then decide.

With a 9x at 380 yds on a 4" box, I could set the crosshairs on the left edge, the center or the right edge with no problems. Not saying I could hit there, but I could resolve there.

What is a budget if you are looking at other scopes? SWFA has a forum with lots of reviews and comparisons. SWFA prices are not bad, but if you decide on a scope you can sometimes get better prices elsewhere, however their customer service is very good. I have three scopes from them. Pick up Butler Creek caps while you are at it whatever you do, they keep your lenses protected.

Actually I dont know how much I'm going to spend on the glass for the 10FP because I kinda want to get the one with the scope already mounted. Some sort of LEO edition.

mdjamesd · 03-31-2007, 09:47 AM

You can always try www.samplelist.com They are factory refurbs with full warranty, or were used for a magazine review.

03-30-2007, 07:17 PM	#2
jeff221 XDTalk 2K Member Join Date: Jul 2006 Location: Northwest Indiana Posts: 2,364	It's 4x magnifacation, but your question is a difficult one because i tall depends on what the size of the target is... I'd say you could run this scope at 100 yards if you were a good shot. __________________ Springfield XD40 Sub-Compact Bi-Tone (.40S&W) Springfield XD9 Tactical Black (9mm) Springfield G.I. Milspec Stainless 1911-A1 (.45 ACP) Kimber Raptor II 1911 (.45 ACP) Kel-Tec P-3AT (.380 ACP) Charter Arms "Off Duty" Revolver (.38 Spl) Ruger 22/45 Mark III (.22 LR) Smith&Wesson M&P15A 16in AR-15 (.223/5.56 NATO) BushMaster Carbon-15 (.22 LR) BushMaster XM15 E2S 20in AR-15 (.223/5.56 NATO) Stoeger P350 Tactical Pump Shotgun (12 Gauge) Winchester Black Model98 Canon (10 Gauge)

03-30-2007, 08:32 PM	#4
Don XDTalk 4K Member Join Date: Mar 2001 Location: Pullman, WA Posts: 4,227	400-500 should be fine. Try it first and then decide. With a 9x at 380 yds on a 4" box, I could set the crosshairs on the left edge, the center or the right edge with no problems. Not saying I could hit there, but I could resolve there. What is a budget if you are looking at other scopes? SWFA has a forum with lots of reviews and comparisons. SWFA prices are not bad, but if you decide on a scope you can sometimes get better prices elsewhere, however their customer service is very good. I have three scopes from them. Pick up Butler Creek caps while you are at it whatever you do, they keep your lenses protected. __________________ Don geek with guns Why don\'t you all f-f-f-fade away.... FAQ - Don\'s Guide Rod Last edited by Don : 03-30-2007 at 08:36 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-31-2007, 09:47 AM	#7
mdjamesd XDTalk 100 Member Join Date: Oct 2006 Location: Baltimore, MD Posts: 173	You can always try www.samplelist.com They are factory refurbs with full warranty, or were used for a magazine review.