Need help.... - XDTalk Forums - Your HS2000/SA-XD Information Source!

Shinmen · 12-30-2007, 06:16 PM

First off, long time reader first time poster

.

I purchased an XD45C for myself for Christmas and LOVE it. I have never had such a great time shooting in my life, wonderful gun.

I have put 750 rds thru it so far with no issues (well, except for swc, they will not feed- which sucks cause they are what I prefer for PPC shoots) and my only bitch is my grouping is roughly 4-5 in low of POA.

This brings me to the point of where I could use some advice. I am gonna purchase adjustable sights, but I wanted to get some opinions on a few sights and which is in your opinions, best. I have used Millet in the past on a S&W 686 and was happy with them but can only find these available for XD's:
http://www.pistolgear.com/proddetail.php?prod=11DPA
http://www.topgunsupply.com/SPR-Sigh...XD-pr-368.html

The rear site is only listed on the next one so I assume I retain the stock
front sight
http://www.topgunsupply.com/TPU-Rear...XD-pr-375.html

If anyone has experiance with any of these, please help.

rockerz71 · 12-30-2007, 06:18 PM

Welcome to the forum.

spamlovr · 12-30-2007, 06:21 PM

Some Sig Sauer sights fit on the XD. I don't know enough about the details to help you, but that is what I know.

Welcome to the forum.

Shinmen · 12-30-2007, 10:49 PM

Thanks for the welcomes

.

**TMP** · 12-31-2007, 12:13 AM

I've heard nothing but praise for the Dawson sights. Maybe a little large for CCW, but for comp. should be great.

tomfoolery · 12-31-2007, 12:19 AM

i ccw an xd 40 service with dawson front sights and the xd factory rear sight and love the setup.

i ordered my dawson from pistolgear.com and would recomend it to anyone. dawsons custmer service is wonderful as well. i busted the first sight when i tired to install it and got mad and snapped it...called em up and they shipped me out a second one at no cost.

Shinmen · 12-31-2007, 12:38 PM

Thanks for your replies. I was leaning towards Dawson, but was kinda hoping someone had good experiances with the others so I could save a few bucks to put towards other mods

.

12-30-2007, 06:16 PM	#1
Shinmen XDTalk Member Join Date: Dec 2007 Location: Taylor, MI Posts: 41	Need help.... First off, long time reader first time poster . I purchased an XD45C for myself for Christmas and LOVE it. I have never had such a great time shooting in my life, wonderful gun. I have put 750 rds thru it so far with no issues (well, except for swc, they will not feed- which sucks cause they are what I prefer for PPC shoots) and my only bitch is my grouping is roughly 4-5 in low of POA. This brings me to the point of where I could use some advice. I am gonna purchase adjustable sights, but I wanted to get some opinions on a few sights and which is in your opinions, best. I have used Millet in the past on a S&W 686 and was happy with them but can only find these available for XD's: http://www.pistolgear.com/proddetail.php?prod=11DPA http://www.topgunsupply.com/SPR-Sigh...XD-pr-368.html The rear site is only listed on the next one so I assume I retain the stock front sight http://www.topgunsupply.com/TPU-Rear...XD-pr-375.html If anyone has experiance with any of these, please help.

12-30-2007, 06:18 PM	#2
rockerz71 XDTalk 3K Member Join Date: Nov 2006 Location: Norcross, GA Posts: 3,362	Welcome to the forum. __________________ Luke GeorgiaCarry.org Member

12-30-2007, 06:21 PM	#3
spamlovr XDTalk 100 Member Join Date: Oct 2006 Location: Washougal, WA كافر Posts: 489	Some Sig Sauer sights fit on the XD. I don't know enough about the details to help you, but that is what I know. Welcome to the forum. __________________ Memento Mori (Remember, you are mortal) When seconds count, the police are only minutes away! People who are pissed at the government have generally underestimated their neighbors. Ziltoid The Omniscient for Supreme World Ruler 2008: "I am so omniscient, if there were 2 omniscient beings in the omniverse, I would be both of them! Bring me your planet's finest cup of coffee!"

12-31-2007, 12:13 AM	#5
TMP XDTalk 1K Member Join Date: Sep 2007 Location: Colorado Posts: 1,067	I've heard nothing but praise for the Dawson sights. Maybe a little large for CCW, but for comp. should be great. __________________ ______________________ XD45 Tactical XD9 subcompact Wilson Border Patrol 870 Ruger 10/22 Beretta U22 Neos 6.0 INOX "Laws that forbid the carrying of arms. . . disarm only those who are neither inclined nor determined to commit crimes. . . Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than to prevent homicides, for an unarmed man may be attacked with greater confidence than an armed man." -- Jefferson`s "Commonplace Book," 1774-1776

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-30-2007, 10:49 PM	#4
Shinmen XDTalk Member Join Date: Dec 2007 Location: Taylor, MI Posts: 41	Thanks for the welcomes .

12-31-2007, 12:19 AM	#6
tomfoolery XDTalk 4K Member Join Date: Apr 2007 Location: Cincinnati Posts: 4,565	i ccw an xd 40 service with dawson front sights and the xd factory rear sight and love the setup. i ordered my dawson from pistolgear.com and would recomend it to anyone. dawsons custmer service is wonderful as well. i busted the first sight when i tired to install it and got mad and snapped it...called em up and they shipped me out a second one at no cost.

12-31-2007, 12:38 PM	#7
Shinmen XDTalk Member Join Date: Dec 2007 Location: Taylor, MI Posts: 41	Thanks for your replies. I was leaning towards Dawson, but was kinda hoping someone had good experiances with the others so I could save a few bucks to put towards other mods .