.45ACP service won't load a round! - XDTalk Forums - Your HS2000/SA-XD Information Source!

GimmieBoost · 08-22-2007, 01:28 PM

This crap XD is about to get sold. I've had it for four months and I've put around 1k rounds through it. I've cleaned it after each trip to the range including the magazines. This thing refuses to load ANYTHING. It jams 6-7 times per 13 round magazine. Most of the time the bullet gets lodged in at a weird angle and you just have to slingshot the slide back. Other times the bullet never leaves the mag. The first failure to load happened at 250 rounds, then a few more at 500ish, now I'm at 1k rounds and it's like this. It does this with both mags. Please tell me that these magazines aren't THAT sh*ty. No way am I buying replacement mags every couple months.

-Jesse

rogerxd45 · 08-22-2007, 01:37 PM

trey pelling on each end of the magspring and if this doesnt work call SA and send it in it has a lifetime warrennty so use it,
good luck

**NC Dave** · 08-22-2007, 01:43 PM

Quote:

Originally Posted by GimmieBoost

This crap XD is about to get sold. I've had it for four months and I've put around 1k rounds through it. I've cleaned it after each trip to the range including the magazines. This thing refuses to load ANYTHING. It jams 6-7 times per 13 round magazine. Most of the time the bullet gets lodged in at a weird angle and you just have to slingshot the slide back. Other times the bullet never leaves the mag. The first failure to load happened at 250 rounds, then a few more at 500ish, now I'm at 1k rounds and it's like this. It does this with both mags. Please tell me that these magazines aren't THAT sh*ty. No way am I buying replacement mags every couple months.

-Jesse

I have put thousands of rounds through my XD45 without a hiccup. No failure of any king on any stock magazines. As stated above, the gun has a lifetime warranty on it - use it as there is obviously a problem. There are hundreds of us here who have never experienced the problems you are describing. It is an issue with a defect with your pistol.

Of course, if all I am doing by typing is feeding a troll, I hope you enjoy the advice anyway!

If you are in the Triangle area let me know when and where you are be at a local range and I'll be happy to take a look at it.

zac07 · 08-22-2007, 01:45 PM

Ill take the piece of junk off your hands for $150 lol

**agalindo** · 08-22-2007, 02:09 PM

Quote:

Originally Posted by zac07

Ill take the piece of junk off your hands for $150 lol

I'll go $155.

xd4life · 08-22-2007, 02:12 PM

He's not a troll

I would send in to SA.

**agalindo** · 08-22-2007, 03:08 PM

Quote:

Originally Posted by xd4life

He's not a troll

I would send in to SA.

Send it in.

GimmieBoost · 08-22-2007, 03:13 PM

I guess I'll give SA a call tomorrow. What makes me so mad is the fact that the majority of XDs never have a problem but mine HAS to break. I have the worst luck with things. Would it matter to SA that I have the Springer sear kit that Pistol Gear sells? It did this before and after the kit.

Thanks,
Jesse

P.S. No, I'm not a troll.

Reeek · 08-22-2007, 03:29 PM

Quote:

Originally Posted by GimmieBoost

I guess I'll give SA a call tomorrow. What makes me so mad is the fact that the majority of XDs never have a problem but mine HAS to break. I have the worst luck with things. Would it matter to SA that I have the Springer sear kit that Pistol Gear sells? It did this before and after the kit.

Thanks,
Jesse

P.S. No, I'm not a troll.

They may reverse that kit if you send it in. Ask for the parts back if they do.

Bill in San Jose · 08-22-2007, 03:39 PM

Bring the gun back to stock, and if the problem continues send it to SA saying to fix or replace it. When it comes back, replace the upgrades. Seems to be the cleanest way to get it fixed, and not get into a pissing match about the mods with the factory. No?

08-22-2007, 01:28 PM	#1
GimmieBoost XDTalk 100 Member Join Date: May 2007 Location: North Carolina Posts: 153	.45ACP service won't load a round! This crap XD is about to get sold. I've had it for four months and I've put around 1k rounds through it. I've cleaned it after each trip to the range including the magazines. This thing refuses to load ANYTHING. It jams 6-7 times per 13 round magazine. Most of the time the bullet gets lodged in at a weird angle and you just have to slingshot the slide back. Other times the bullet never leaves the mag. The first failure to load happened at 250 rounds, then a few more at 500ish, now I'm at 1k rounds and it's like this. It does this with both mags. Please tell me that these magazines aren't THAT sh*ty. No way am I buying replacement mags every couple months. -Jesse

08-22-2007, 02:12 PM	#6
xd4life XDTalk 2K Member Join Date: Sep 2005 Location: Back in HOTLANTA Posts: 2,251	He's not a troll I would send in to SA. __________________ "A fine is a tax for doing wrong. A tax is a fine for doing well." Rick Hebert "The best victory is when the opponent surrenders of its own accord before there are any actual hostilities.... It is best to win without fighting." Sun-tzu 300 B.C Bob Barr FOR PRESIDENT

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-22-2007, 01:37 PM	#2
rogerxd45 XDTalk 3K Member Join Date: May 2007 Location: boise ID (its boy-see, not boy-z) Posts: 3,592	trey pelling on each end of the magspring and if this doesnt work call SA and send it in it has a lifetime warrennty so use it, good luck

08-22-2007, 01:45 PM	#4
zac07 XDTalk 1K Member Join Date: Feb 2007 Location: West Texas Posts: 1,117	Ill take the piece of junk off your hands for $150 lol

08-22-2007, 03:13 PM	#8
GimmieBoost XDTalk 100 Member Join Date: May 2007 Location: North Carolina Posts: 153	I guess I'll give SA a call tomorrow. What makes me so mad is the fact that the majority of XDs never have a problem but mine HAS to break. I have the worst luck with things. Would it matter to SA that I have the Springer sear kit that Pistol Gear sells? It did this before and after the kit. Thanks, Jesse P.S. No, I'm not a troll.

08-22-2007, 03:39 PM	#10
Bill in San Jose XDTalk 1K Member Join Date: Jul 2007 Posts: 1,305	Bring the gun back to stock, and if the problem continues send it to SA saying to fix or replace it. When it comes back, replace the upgrades. Seems to be the cleanest way to get it fixed, and not get into a pissing match about the mods with the factory. No?