Got my First XD!!!! - XDTalk Forums - Your HS2000/SA-XD Information Source!

kkibbey · 07-31-2007, 01:21 PM

Hi All,
I just wanted to say thanks to everyone for all the Great info on here!! I just got my first XD, I was originally going to get the 4” service until I looked at the 5" Tactical. It was over from the start I really like this gun it fits in my hand perfect! I will try to get some pictures later. I cant wait to take it to the range and test it out.

I just really glad to be out of a state where I cant even touch a handgun with out a permit that takes a year to get (NY) and relocate to a state where I can actually go and buy a gun.

I ordered 3 more mags a few min ago. My next question is about the Sights, I would like to get the TFO. But Is this something that I can install or does it need to be put on by a gunsmith? Any other suggestions on what I should do to further my enjoyment of this pistol??

Thanks
Kris

**Liquid Rhino** · 07-31-2007, 02:17 PM

Welcome to the fam Kris, you're gonna love your new XD!

The TFO's should be installed by a competent gunsmith, as the XD's stock sights, are a bit tight from the factory. While you *can* install them yourself if you have the proper tools & know-how, you risk damaging both the sights and your slide, not to mention proper sight alignment is key.

Take note also that not all Gunsmiths may install TFO' on XD's for this reason, as was the case where I had to call around (only 2 places out of 10 said they could do it) my area to find someone that would do it for the XD's.

On the plus side, those TFO's are sweeeeet once they're installed, VERY QUICK target acquisition!!!

Hope this helps!

anhiciano · 07-31-2007, 02:20 PM

Welcome!

Hemidart · 07-31-2007, 02:48 PM

Gratz!

I also got an XD-45, but in Service dress. I think the XD might be one of the best autos on the market right now. The only thing I plan to change are the sights. Other then that she hits very accurately and feels very natural in my hand.

slugger6 · 07-31-2007, 03:26 PM

Welcome to the XD family. +1 on the TFOs!

jeff221 · 07-31-2007, 03:29 PM

Tell me son, what is the purpose for your new firearm?

Do you intend on carrying it? Do you intending on competing with it? Do you intend on shooting it at the range? Make up your damn mind son! Which is it!

You asked about sights... I'll give you an answer... but won't bother till you answer me.. I'm asking the question here boy! Every decision is based on the one prior...

p.s. beer is good

Ishpeck · 07-31-2007, 03:56 PM

Welcome to FREE America.

Chi Town · 07-31-2007, 08:03 PM

Welcome, my good friend. Ah yes.... The XD's are great !!!!

Tally XD · 07-31-2007, 09:53 PM

Welcome!

I too had to decide between the service and the tac. The service fit me better, but I'd not kick either one outta bed!

Kingpole · 07-31-2007, 09:55 PM

Rock on my XD brutha.

07-31-2007, 01:21 PM	#1
kkibbey XDTalk Newbie Join Date: May 2007 Location: pa Posts: 17	Got my First XD!!!! Hi All, I just wanted to say thanks to everyone for all the Great info on here!! I just got my first XD, I was originally going to get the 4” service until I looked at the 5" Tactical. It was over from the start I really like this gun it fits in my hand perfect! I will try to get some pictures later. I cant wait to take it to the range and test it out. I just really glad to be out of a state where I cant even touch a handgun with out a permit that takes a year to get (NY) and relocate to a state where I can actually go and buy a gun. I ordered 3 more mags a few min ago. My next question is about the Sights, I would like to get the TFO. But Is this something that I can install or does it need to be put on by a gunsmith? Any other suggestions on what I should do to further my enjoyment of this pistol?? Thanks Kris

07-31-2007, 02:20 PM	#3
anhiciano XDTalk 1K Member Join Date: Feb 2006 Location: Dominican Republic Posts: 1,020	Welcome! __________________ HS2000 PORTED BI-TONE “A fear of weapons is a sign of retarded sexual and emotional maturity” Sigmund Freud. If Guns are outlawed,Only outlaws will have guns. and he that hath no sword, let him sell his garment, and buy one. -Jesus-

07-31-2007, 03:26 PM	#5
slugger6 XDTalk 20K Member Join Date: Dec 2006 Location: Ohio Posts: 21,376	Welcome to the XD family. +1 on the TFOs! __________________ "What lies behind us and what lies before us are tiny matters compared to what lies within us". - Ralph Waldo Emerson

07-31-2007, 03:29 PM	#6
jeff221 XDTalk 2K Member Join Date: Jul 2006 Location: Northwest Indiana Posts: 2,364	Tell me son, what is the purpose for your new firearm? Do you intend on carrying it? Do you intending on competing with it? Do you intend on shooting it at the range? Make up your damn mind son! Which is it! You asked about sights... I'll give you an answer... but won't bother till you answer me.. I'm asking the question here boy! Every decision is based on the one prior... p.s. beer is good __________________ Springfield XD40 Sub-Compact Bi-Tone (.40S&W) Springfield XD9 Tactical Black (9mm) Springfield G.I. Milspec Stainless 1911-A1 (.45 ACP) Kimber Raptor II 1911 (.45 ACP) Kel-Tec P-3AT (.380 ACP) Charter Arms "Off Duty" Revolver (.38 Spl) Ruger 22/45 Mark III (.22 LR) Smith&Wesson M&P15A 16in AR-15 (.223/5.56 NATO) BushMaster Carbon-15 (.22 LR) BushMaster XM15 E2S 20in AR-15 (.223/5.56 NATO) Stoeger P350 Tactical Pump Shotgun (12 Gauge) Winchester Black Model98 Canon (10 Gauge)

07-31-2007, 03:56 PM	#7
Ishpeck XDTalk 4K Member Join Date: Mar 2007 Location: Earth Posts: 4,232	Welcome to FREE America. __________________ When given a chance to issue letters of marque and reprisal against Bin Laden, Congress voted against it and instead, voted the Patriot Act into law. Tells you who they think their real enemies are. http://www.ishpeck.net/

07-31-2007, 02:17 PM	#2
Liquid Rhino XDTalk 1K Member Join Date: Jul 2007 Location: three\|zero\|five Posts: 1,037	Welcome to the fam Kris, you're gonna love your new XD! The TFO's should be installed by a competent gunsmith, as the XD's stock sights, are a bit tight from the factory. While you can install them yourself if you have the proper tools & know-how, you risk damaging both the sights and your slide, not to mention proper sight alignment is key. Take note also that not all Gunsmiths may install TFO' on XD's for this reason, as was the case where I had to call around (only 2 places out of 10 said they could do it) my area to find someone that would do it for the XD's. On the plus side, those TFO's are sweeeeet once they're installed, VERY QUICK target acquisition!!! Hope this helps!

07-31-2007, 02:48 PM	#4
Hemidart XDTalk Member Join Date: Jul 2007 Posts: 90	Gratz! I also got an XD-45, but in Service dress. I think the XD might be one of the best autos on the market right now. The only thing I plan to change are the sights. Other then that she hits very accurately and feels very natural in my hand.

07-31-2007, 08:03 PM	#8
Chi Town XDTalk Member Join Date: Jun 2007 Location: Albuquerque, New Mexico Posts: 58	Welcome, my good friend. Ah yes.... The XD's are great !!!! __________________ My associates; Ruger 10/22 ss Ruger SP101 Kel Tec P32 Kimber Ultra CDP 45 Springfield XD 9mm 4" Springfield XD .40 sc Springfield XD .357 od 4" Springfield XD .45ACP Black 4" Tec-9 Pre Ban

07-31-2007, 09:53 PM	#9
Tally XD XDTalk 1K Member Join Date: Apr 2007 Location: North Florida Posts: 1,400	Welcome! I too had to decide between the service and the tac. The service fit me better, but I'd not kick either one outta bed! __________________ _________________________________________ "My first priority will be to reinstate the assault weapons ban as soon as I take office. In the first year, I intend to work with Congress on a national no carry law, one gun a month purchase limits, and bans on all semi-automatic guns." *-Barack Obama, VPC Fund Raiser, 2007* _________________________________________

07-31-2007, 09:55 PM	#10
Kingpole XDTalk Member Join Date: Jun 2007 Location: Northwest Florida Posts: 91	Rock on my XD brutha. __________________ If it doesn't kill me, it will make me stronger. http://www.flaguns.com Florida Gun Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode