Lswc

[Motengator]

For you all that have problems with your 45acp chambering LSWC. I shot a little over 600 rounds of my lead semi wad cutters out of my 45acp Tactical. Other then 3 rounds not fully ejecting and one case strong enough to push the slide back part way and rechamber the fired case I had no problems with them chambering. If I load close to the max I know I won't have any problem's with ejecting. Just wanted to let you all know that MY Tactical does not have any problems with LSWC.

[Tard]

Which bullet?
What weight?
What seating depth?

[Motengator]

Seating depth? Oh man I hope I'm using the caliper right. So if it doesn't sound right then let me know. HAHA I use 200 gr SWC from, "Silver State Bullet" from Carson City NV. All so use the same type of bullet from, "REDLINE Ballistics". I looked in the Lyman Reloading book where the over all length from top to bottom of a loaded bullet is 1.275 MAX and if I read the caliper right mine is right between 1.259 and 1.260. I use 4.5 gr's of Bullseye where the max is 5.0 gr's. I have miltary brass mixed in with commercial brass so don't want to worry about the higher pressure with the thick walls of the miltary brass. I don't use soft lead bullets. To me soft is when I can scrape any amount of lead or put any kind of indentation with my thumb nail in the bullet. I hope that helps. And to you reloader's you all know not to use anybody's reloading data concerning the powder with out checking your loading book first.