XD45 Trigger - who's planning a trigger job and who's not? - XDTalk Forums - Your HS2000/SA-XD Information Source!

kraigster414 · 02-19-2006, 08:59 PM

Not that there is anything wrong with the factory trigger as far as defensive guns go. But I did have Canyon Creek work on my XD40 and now I am a bit spoiled. Rich reduced the travel time quite a bit and when I compare my XD40 to my XD45 there is a noticeable difference in "travel time." Nevertheless, my XD45 is a great shooter and I am very accurate with it. So, I am just curious about how many of you are planningon leaving the trigger alone and how many are planning on having it worked on. I am very easily influenced.

Thanks.

DJDan · 02-20-2006, 02:27 AM

Mine will be going to CC for sure for a trigger job, as will my new XD-9 Service. I'd like to get a few thousand rounds down the range with each of these before I do much of anything to them. The XD-9 IS at SA right now for an Armory Kote of the slide and controls.

Both of these triggers feel better than my older XD's did, but Rich's work feels 10 times better.

Due to quite a few other projects in the works and a lack of extra cash it will be quite a while before either of these go to CC, but it will ultimately happen for sure!

empoknor · 02-20-2006, 04:29 PM

DJDan, who is CC

Are they online

Thanks for a reply,
EM

Ron xd357 · 02-20-2006, 04:37 PM

CC is Canyon creek aka Rich he is a well respected pistol smith that performs amazing things with the xd pistol You can contact him or go to pistol gear.com for prices

Ron

empoknor · 02-20-2006, 04:47 PM

THANKS, RON

nushooter · 02-21-2006, 02:25 PM

So how does Canyon Creek's trigger work compare to that of Springfield's custom shop?

DJDan · 02-21-2006, 07:47 PM

Most who have both say it's better. I only have a CC trigger job and honestly couldnt imagine it being able to get any better.

02-19-2006, 08:59 PM	#1
kraigster414 XDTalk 1K Member Join Date: Dec 2004 Location: Upper Himalayas Posts: 1,443	XD45 Trigger - who's planning a trigger job and who's not? Not that there is anything wrong with the factory trigger as far as defensive guns go. But I did have Canyon Creek work on my XD40 and now I am a bit spoiled. Rich reduced the travel time quite a bit and when I compare my XD40 to my XD45 there is a noticeable difference in "travel time." Nevertheless, my XD45 is a great shooter and I am very accurate with it. So, I am just curious about how many of you are planningon leaving the trigger alone and how many are planning on having it worked on. I am very easily influenced. Thanks. __________________ "Happiness? A good cigar, a good meal, a good cigar and a good woman - or a bad woman; it depends on how much happiness you can handle." - George Burns

02-20-2006, 02:27 AM	#2
DJDan XDTalk 1K Member Join Date: Jun 2005 Location: Indianapolis, IN Posts: 1,338	Mine will be going to CC for sure for a trigger job, as will my new XD-9 Service. I'd like to get a few thousand rounds down the range with each of these before I do much of anything to them. The XD-9 IS at SA right now for an Armory Kote of the slide and controls. Both of these triggers feel better than my older XD's did, but Rich's work feels 10 times better. Due to quite a few other projects in the works and a lack of extra cash it will be quite a while before either of these go to CC, but it will ultimately happen for sure! __________________ I like turtles.

02-20-2006, 04:37 PM	#4
Ron xd357 XDTalk 100 Member Join Date: Mar 2005 Location: Michigan Posts: 276	who is cc CC is Canyon creek aka Rich he is a well respected pistol smith that performs amazing things with the xd pistol You can contact him or go to pistol gear.com for prices Ron __________________ always add to the collection/

02-21-2006, 07:47 PM	#7
DJDan XDTalk 1K Member Join Date: Jun 2005 Location: Indianapolis, IN Posts: 1,338	Most who have both say it's better. I only have a CC trigger job and honestly couldnt imagine it being able to get any better. __________________ I like turtles.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-20-2006, 04:29 PM	#3
empoknor XDTalk Member Join Date: Feb 2006 Location: Washougal, WA Posts: 44	DJDan, who is CC Are they online Thanks for a reply, EM

02-20-2006, 04:47 PM	#5
empoknor XDTalk Member Join Date: Feb 2006 Location: Washougal, WA Posts: 44	THANKS, RON

02-21-2006, 02:25 PM	#6
nushooter XDTalk Member Join Date: Jan 2006 Posts: 39	So how does Canyon Creek's trigger work compare to that of Springfield's custom shop?