Missing Extractor Pin in S&W 629-1

[John66]

I have a Model 629-1 that is missing one of the extractor pins, that the extractor indexes on. The hole where the pin fits is empty so apparently the pin has fallen out. Can someone help me with another pin? I am hoping the pin can be pressed in or fixed with something like Loc-Tite, or should the cylinder be taken to a gunsmith for repair? Thank you for your help.
An inquiry to S&W indicated they no longer carry the pin and it was installed at the factory.
John

[Teddybear]

It's an easy fix. Your gunsmith should have them in stock.

[John66]

Thanks Teddybear. I will give the local gunsmith a call.
John

[John66]

Called local gunsmith and they had no pins so I fabricated one myself. Used a small letter drill bit that was a couple thousandths larger than other ejector pin and lightly ground it down, cut to proper length and swagged it in place. The repaired pin is on the right ~4:00.