trigger work - XDTalk Forums - Your HS2000/SA-XD Information Source!

aiformula · 03-15-2005, 05:30 AM

I've been meaning to ask. Does the trigger job bump you to Limited, or is this just the case if you change pull weight?

I have been considering a trigger job from Rich or Dave on my Tactical, but don't want to bump the gun out of production.

**Old School** · 03-15-2005, 06:28 AM

Tony,

The trigger job, being an internal modification, does not affect divison. Only mods like optics, grip enhancements, magwells, etc, will send your XD to Limited.

You are safe with a Canyon Creek trigger job.

Scott

mullanman · 03-16-2005, 08:45 AM

Any internal work used to enhance the reliability of a gun may be done. The gun may be refinished as well, as per a new rule change. Any grip modification, magwell work will bump you to open class.

Even the magwell that pistol gear sells will move you to open class.

You can put skate tape, or other grip enhancers on, i.e. pearce grips on the gun without any problem.

New sites can be put on, you cannot have the slide lightened.

Hope this helps.

R/T Performance · 06-09-2005, 08:53 AM

I have been trying to figure all of this out is thier still a min pull wieght 5#?
No magwell but decal grips ok?

bobert1 · 06-09-2005, 08:56 AM

No Min trigger pull weight as long as you don't leave the USA.
Correct, No magwells but you can add any kind on grip tape.

R/T Performance · 06-09-2005, 09:02 AM

Thanks BOB I found a uspsa local league and they have a state match next month any reccomend class ?I will be shooting my service Xd and have been trying to sort threw all of these rules and haven't figured them all out

What about guide rod's ? Tungston ok?

cheapo · 06-09-2005, 12:29 PM

Who has 16 lbs spring in stock? I have had a hard time finding the 16 lbs for my Don's Rod service XD9.

R/T Performance · 06-09-2005, 12:37 PM

I think Old school @ www.pistol-gear.com
He has been trying different weights
http://www.pistol-gear.com/proddetail.php?prod=85PA
Say's tac. only?

bobert1 · 06-09-2005, 12:57 PM

I was just up in Brighton, MI at a Catholic School Charity Match. Might be up for the MI State Match. It is right is your backyard. http://www.sksc.org/ No problem with the tungston guide rod. You should shoot in Limited 10 Division under the U classification. U for unclassified until you have joined USPSA and shot in 4 matches. After that they will send you a classification card. Will be shooting next weekend with two forum members next week. Ampleworks & itchy trigger at the Ohio Sectionals.

R/T Performance · 06-09-2005, 01:19 PM

Cool thats the one I have the registration for

The also have a monthly match so hope to see ya there

SoI will get a little brakin first

03-15-2005, 05:30 AM	#1
aiformula XDTalk 3K Member Join Date: Oct 2004 Location: sw ohio Posts: 3,087	trigger work I've been meaning to ask. Does the trigger job bump you to Limited, or is this just the case if you change pull weight? I have been considering a trigger job from Rich or Dave on my Tactical, but don't want to bump the gun out of production. __________________ Tony Obama '08... change we can bereave in. Guns are like orgasms.......you just can't have enough good ones!

03-15-2005, 06:28 AM	#2
Old School XDTalk 5K Member Join Date: Dec 2003 Location: Illinois Posts: 7,630	Tony, The trigger job, being an internal modification, does not affect divison. Only mods like optics, grip enhancements, magwells, etc, will send your XD to Limited. You are safe with a Canyon Creek trigger job. Scott __________________ Visit www.pistolgear.com for all of your XD needs!

03-16-2005, 08:45 AM	#3
mullanman XDTalk 1K Member Join Date: Dec 2003 Location: New Mexico Posts: 1,909	Any internal work used to enhance the reliability of a gun may be done. The gun may be refinished as well, as per a new rule change. Any grip modification, magwell work will bump you to open class. Even the magwell that pistol gear sells will move you to open class. You can put skate tape, or other grip enhancers on, i.e. pearce grips on the gun without any problem. New sites can be put on, you cannot have the slide lightened. Hope this helps. __________________ USPSA L2683

06-09-2005, 08:53 AM	#4
R/T Performance XDTalk 3K Member Join Date: Jan 2005 Location: Saranac Mi Posts: 3,491	I have been trying to figure all of this out is thier still a min pull wieght 5#? No magwell but decal grips ok? __________________ XD-9 Tacticle Tru-glow tfo's 3# Canyoncreek trigger Dillon Rl550 1911 Springfield Champion loaded 45 acp Kahr p40 Watch me shoot http://video.google.com/videoplay?do...32660329653237

06-09-2005, 08:56 AM	#5
bobert1 XDTalk 500 Member Join Date: Oct 2004 Location: Dayton, Ohio Posts: 568	No Min trigger pull weight as long as you don't leave the USA. Correct, No magwells but you can add any kind on grip tape. __________________ XD9 Service Bi-Tone for Production XD9 Compact Bi-Tone for carry XD45 ACP Tactical Bi-Tone for L10 w/ PG SS Magwell ROCK RIVER CAR A4 w/EOTECH for side matches USMC Veteran USPSA CRO - L3093 (forever 'C' Class)

06-09-2005, 09:02 AM	#6
R/T Performance XDTalk 3K Member Join Date: Jan 2005 Location: Saranac Mi Posts: 3,491	Thanks BOB I found a uspsa local league and they have a state match next month any reccomend class ?I will be shooting my service Xd and have been trying to sort threw all of these rules and haven't figured them all out What about guide rod's ? Tungston ok? __________________ XD-9 Tacticle Tru-glow tfo's 3# Canyoncreek trigger Dillon Rl550 1911 Springfield Champion loaded 45 acp Kahr p40 Watch me shoot http://video.google.com/videoplay?do...32660329653237

06-09-2005, 12:29 PM	#7
cheapo XDTalk Member Join Date: Oct 2004 Location: Denver Posts: 95	Who has 16 lbs spring in stock? I have had a hard time finding the 16 lbs for my Don's Rod service XD9.

06-09-2005, 12:37 PM	#8
R/T Performance XDTalk 3K Member Join Date: Jan 2005 Location: Saranac Mi Posts: 3,491	I think Old school @ www.pistol-gear.com He has been trying different weights http://www.pistol-gear.com/proddetail.php?prod=85PA Say's tac. only? __________________ XD-9 Tacticle Tru-glow tfo's 3# Canyoncreek trigger Dillon Rl550 1911 Springfield Champion loaded 45 acp Kahr p40 Watch me shoot http://video.google.com/videoplay?do...32660329653237

06-09-2005, 12:57 PM	#9
bobert1 XDTalk 500 Member Join Date: Oct 2004 Location: Dayton, Ohio Posts: 568	I was just up in Brighton, MI at a Catholic School Charity Match. Might be up for the MI State Match. It is right is your backyard. http://www.sksc.org/ No problem with the tungston guide rod. You should shoot in Limited 10 Division under the U classification. U for unclassified until you have joined USPSA and shot in 4 matches. After that they will send you a classification card. Will be shooting next weekend with two forum members next week. Ampleworks & itchy trigger at the Ohio Sectionals. __________________ XD9 Service Bi-Tone for Production XD9 Compact Bi-Tone for carry XD45 ACP Tactical Bi-Tone for L10 w/ PG SS Magwell ROCK RIVER CAR A4 w/EOTECH for side matches USMC Veteran USPSA CRO - L3093 (forever 'C' Class)

06-09-2005, 01:19 PM	#10
R/T Performance XDTalk 3K Member Join Date: Jan 2005 Location: Saranac Mi Posts: 3,491	Cool thats the one I have the registration for The also have a monthly match so hope to see ya there SoI will get a little brakin first __________________ XD-9 Tacticle Tru-glow tfo's 3# Canyoncreek trigger Dillon Rl550 1911 Springfield Champion loaded 45 acp Kahr p40 Watch me shoot http://video.google.com/videoplay?do...32660329653237

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode