I think i have some rust - Page 3 - XDTalk Forums - Your HS2000/SA-XD Information Source!

grahamstein · 12-21-2007, 09:06 PM

Well its already been shipped to SA, so its a moot point. There is no certainty at this point that it will be covered under the warranty, but there is no certainty it wont be. From what i have read about SA and their warranty service, i have a feeling it will be covered but if not i will definately let you guys know. I always like the armory-kote finish as is, so even if i have to pay its not a huge loss.

J-ROC · 12-22-2007, 06:51 AM

Well here is my 0.2, i have had my xd .40 for over 5 years and have had only one instance of rust! It had surface rust on rail serrations after handling it and putting it away in the the night stand and not wiping it with a silicone cloth. I pull it out about a week later and noticed the rust, i just grabbed the never dull wadding polish and wiped the rust right off. I re oiled the slide and never had a issue ever again. Also i carry my xd in the truck and never had any rust, 95% at or near the beach. I believe most of the rust issues are from just neglect or laziness i guess. Just check on your gun once in a while to make sure it is protected from the elements. Also remember all guns will rust if they not oiled. I hope this post does not strike anyone the wrong way, but if it does oh well! Remember it is just a forum.

grahamstein · 01-01-2008, 04:25 PM

Quote:

Originally Posted by J-ROC

I believe most of the rust issues are from just neglect or laziness i guess. Just check on your gun once in a while to make sure it is protected from the elements. Also remember all guns will rust if they not oiled. I hope this post does not strike anyone the wrong way, but if it does oh well! Remember it is just a forum.

Well i dont really take offense to it. But i can say that i drift off to sleep some nights wondering if all my guns are cleaned/oiled properly. I guess if i was tentative enough to them i would have to wonder. I clean them every time i shoot, and if i notice they are getting any sort of dust on them.

That being said i got a letter back from SA today. Slide refinished, charge: 0.00

Cant wait to get it back now.

xdfan80 · 01-01-2008, 04:28 PM

Quote:

Originally Posted by Fish609

Wow, all that over such a short time.

I nearly lost my stomache there...

I dont feel good now.

grahamstein · 01-02-2008, 05:50 PM

Got my slide back today. It looks great, has a nice oiled look permanently, with a very fine stipling. Slick as could be. Sa Sent it back with a nice clamshell case, and re-touched the sights for me also. As an added bonus they "Koted" the bushing for dons guide rod, making the front look more uniform, almost like the 45. I am also glad to say there was no pitting on the slide or barrel. It must have just been surface rust.
Without further ado.

ArmyGuy45 · 01-02-2008, 05:58 PM

man.. what are you using ... an cast iron hoslter?

RAVXD · 01-02-2008, 06:54 PM

spiffy........

NBollinger · 01-02-2008, 07:06 PM

wow, SA did a great job. The work they did speaks volumes for their customer service.

rgeliske · 02-18-2008, 04:48 AM

By the looks of your picture your mag release needs some attention.

**tnammokeg** · 02-18-2008, 06:25 AM

Well did SA charge you or did they cover it under warranty?

12-21-2007, 09:06 PM	#21
grahamstein XDTalk 500 Member Join Date: Oct 2006 Location: West Nyack, NY Posts: 657	Well its already been shipped to SA, so its a moot point. There is no certainty at this point that it will be covered under the warranty, but there is no certainty it wont be. From what i have read about SA and their warranty service, i have a feeling it will be covered but if not i will definately let you guys know. I always like the armory-kote finish as is, so even if i have to pay its not a huge loss. __________________ "To be Irish is to know that in the end, the world will break your heart." - Daniel Patrick Moynihan

12-22-2007, 06:51 AM	#22
J-ROC XDTalk Newbie Join Date: Nov 2003 Location: Jacksonville,FL Posts: 4	Well here is my 0.2, i have had my xd .40 for over 5 years and have had only one instance of rust! It had surface rust on rail serrations after handling it and putting it away in the the night stand and not wiping it with a silicone cloth. I pull it out about a week later and noticed the rust, i just grabbed the never dull wadding polish and wiped the rust right off. I re oiled the slide and never had a issue ever again. Also i carry my xd in the truck and never had any rust, 95% at or near the beach. I believe most of the rust issues are from just neglect or laziness i guess. Just check on your gun once in a while to make sure it is protected from the elements. Also remember all guns will rust if they not oiled. I hope this post does not strike anyone the wrong way, but if it does oh well! Remember it is just a forum. Last edited by J-ROC; 12-22-2007 at 06:55 AM.

01-02-2008, 05:50 PM	#25
grahamstein XDTalk 500 Member Join Date: Oct 2006 Location: West Nyack, NY Posts: 657	Got my slide back today. It looks great, has a nice oiled look permanently, with a very fine stipling. Slick as could be. Sa Sent it back with a nice clamshell case, and re-touched the sights for me also. As an added bonus they "Koted" the bushing for dons guide rod, making the front look more uniform, almost like the 45. I am also glad to say there was no pitting on the slide or barrel. It must have just been surface rust. Without further ado. __________________ "To be Irish is to know that in the end, the world will break your heart." - Daniel Patrick Moynihan Last edited by grahamstein; 01-02-2008 at 07:18 PM.

01-02-2008, 05:58 PM	#26
ArmyGuy45 XDTalk 3K Member Join Date: Mar 2007 Location: Mesa,AZ / Ft Carson, CO Posts: 3,419	man.. what are you using ... an cast iron hoslter? __________________ US Army 2005 - Present XD45 Compact - My Carry Suresights Springer Precision Trigger Kit/Bar ( needs install ) NRA Life Member Myspace If they take my guns, ill carry a sword!

01-02-2008, 06:54 PM	#27
RAVXD XDTalk 100 Member Join Date: Jan 2008 Location: usa Posts: 250	spiffy........ __________________

01-02-2008, 07:06 PM	#28
NBollinger XDTalk 500 Member Join Date: Aug 2006 Location: Houston, TX Posts: 538	wow, SA did a great job. The work they did speaks volumes for their customer service. __________________ XD .45ACP Tactical Kimber Stainless Custom II .45 ACP Ruger GP100 .357 S&W Model 915 9MM Beretta 92FS 9MM Mossberg 535 ATS 12 ga. Mossberg 100 ATR .30-'06 Stag Arms Model 3

02-18-2008, 04:48 AM	#29
rgeliske XDTalk 1K Member Join Date: Aug 2003 Location: Central Florida Posts: 1,788	By the looks of your picture your mag release needs some attention. __________________ Sig P220, Taurus PT1911, Browning HiPower 9mm, CZ75, CZ75 P01, Kahr CW9, Savage 9317 BTVS .17, Browning Buckmark, Taurus Gaucho 357 (pair), Taurus Gaucho 45LC (pair), Uberti 1873 Saddle Rifle 357, Uberti 1873 45 LC Carbine, TTN 12 Gauge Double, Ruger Bisley Vaquero 357 (pair), Springfield XD9SC, XD45 Service, XD45 Compact Tactical, XD(M) 40S&W BiTone, Glock G35, Taurus 617 357

02-18-2008, 06:25 AM	#30
tnammokeg XDTalk Member Join Date: Jan 2008 Posts: 45	Well did SA charge you or did they cover it under warranty?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode