WHAT XD FOR USPSA Production - XDTalk Forums - Your HS2000/SA-XD Information Source!

law_n_4_zer · 04-06-2006, 05:59 AM

Okay currently I am using a 4in 40 in L10 Division. I just recently started shooting USPSA and used what I had available. I have been thinking about getting a different gun to use and maybe go to production So I guess the question is what is best to use xd 9 tac, xd 9 4in

EDIT:

okay I guess I needed to add the 40 to the list but I cant now so either or the big question comes down to 4 in or tactical

mcb · 04-06-2006, 07:24 AM

If you reload or are thinking about reloading I would shoot a XD-40 for Production. Your Service would be find assuming you have not added to many modification that are not allowed in production, a Tactical would be even better. 40S&W loaded down to 130-135 power factor using heavy 180 grain bullets is one smooth shooting round. I an XD-40 Tactical Minor loads are very flat shooting. You will be hard press to find recoil as nice with any 9mm. Not to mention the larger diameter bullet may get you a few extra point every once in a while. For that matter an XD-45ACP with minor load would probably be an even sweeter production gun when it makes the list.

JMHO
mcb

R/T Performance · 04-06-2006, 10:44 AM

Why have two four inchers

Tac or tac yes 9mm or 40 rule

View Poll Results: Which XD for Production in USPSA
XD 9 TAC	12	80.00%
XD 9 SERVICE	3	20.00%
Voters: 15. You may not vote on this poll

04-06-2006, 05:59 AM	#1
law_n_4_zer XDTalk 100 Member Join Date: Nov 2005 Location: Missouri Posts: 272	WHAT XD FOR USPSA Production Okay currently I am using a 4in 40 in L10 Division. I just recently started shooting USPSA and used what I had available. I have been thinking about getting a different gun to use and maybe go to production So I guess the question is what is best to use xd 9 tac, xd 9 4in EDIT: okay I guess I needed to add the 40 to the list but I cant now so either or the big question comes down to 4 in or tactical __________________ Support our Troops Cental Ozarks Practical Shooters Range http://www.copsrange.org If it wasn't for stupid people I would not have job security

04-06-2006, 07:24 AM	#2
mcb XDTalk 2K Member Join Date: Feb 2005 Location: North East Ohio Posts: 2,038	If you reload or are thinking about reloading I would shoot a XD-40 for Production. Your Service would be find assuming you have not added to many modification that are not allowed in production, a Tactical would be even better. 40S&W loaded down to 130-135 power factor using heavy 180 grain bullets is one smooth shooting round. I an XD-40 Tactical Minor loads are very flat shooting. You will be hard press to find recoil as nice with any 9mm. Not to mention the larger diameter bullet may get you a few extra point every once in a while. For that matter an XD-45ACP with minor load would probably be an even sweeter production gun when it makes the list. JMHO mcb __________________ If at first you don't succeed; RELOAD _ _ _ _ My web site

04-06-2006, 10:44 AM	#3
R/T Performance XDTalk 3K Member Join Date: Jan 2005 Location: Saranac Mi Posts: 3,491	Why have two four inchers Tac or tac yes 9mm or 40 rule __________________ XD-9 Tacticle Tru-glow tfo's 3# Canyoncreek trigger Dillon Rl550 1911 Springfield Champion loaded 45 acp Kahr p40 Watch me shoot http://video.google.com/videoplay?do...32660329653237

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode