One-stop PG barrel + fitting + threading? - XDTalk Forums - Your HS2000/SA-XD Information Source!

selectedmarksman · 02-20-2008, 02:38 PM

I am looking at getting a Pistol Gear barrel for my Springfield XD .45 Service, threaded to host an SWR HEMS II Suppressor. Is there a one-stop-shopping solution to this? That is, is there a smith that is a distributor of Pistol Gear Match Tactical barrels who could fit that barrel to my firearm as well as cut it down and thread it to .578x28 pitch?

My other alternative would be to buy a drop-in barrel in tactical length and have a smith I trust cut it down and thread it. If I could find someone to fit a Match barrel and thread it all at once that would be even better though.

All thoughts appreciated.

**Ed Ely** · 02-20-2008, 05:44 PM

Yep! Make arrangements with Scott
at PistolGear. He associates also with
another forum sponsor who is on the
West coast. Scott will take care of
your needs.

Ed

**Old School** · 02-20-2008, 08:29 PM

There are a few on XDTalk who have done what you want. Both Scott Springer (www.springerprecision.com) and Rich Dettelhouser (www.canyoncreekcustom.com) have the skills and tools to do what you want to do.

I would go with the Match barrel, since it needs to be cut and crowned any how. You may as well get the most accuracy possible.

Since you have the thread requirements, you need only send the gun, your new barrel and the can to either of these guys in order to have the pieces put together. Sounds like a fun project!

OS

selectedmarksman · 02-20-2008, 08:50 PM

My XD is actually with Mr. Springer right now for sights and trigger work so I may be giving him some repeat business.

Thanks for the the help. I loved my SWR HEMS II on my HK USPc .45 but with the XD being my new favorite it's only fair to set it up as a new host.

**Old School** · 02-21-2008, 10:05 AM

Quote:

Originally Posted by selectedmarksman

My XD is actually with Mr. Springer right now for sights and trigger work so I may be giving him some repeat business.

Thanks for the the help. I loved my SWR HEMS II on my HK USPc .45 but with the XD being my new favorite it's only fair to set it up as a new host.

Mr. Springer has the skillz to do what yo need to have done.

OS

BurntPocketHole · 02-23-2008, 02:47 PM

hmm this is a good thread for me to find. Im about to submit some form 4's to the atf next week for a 45 can. I need to get a barrel and have it threaded for my 45c. A one stop shop would be nice. I assume the pistolgear tactical barrels will work for this project. I dont want to order from EFK.

Ill keep this in mind.

**Old School** · 02-23-2008, 04:18 PM

Quote:

Originally Posted by BurntPocketHole

hmm this is a good thread for me to find. Im about to submit some form 4's to the atf next week for a 45 can. I need to get a barrel and have it threaded for my 45c. A one stop shop would be nice. I assume the pistolgear tactical barrels will work for this project. I dont want to order from EFK.

Ill keep this in mind.

Service you have the Compact 4", you can either go with our Match barrel or the Drop-In. Since the barrel will need to be cut, threaded and crowned, you may as well go with the Match.

OS

02-20-2008, 02:38 PM	#1
selectedmarksman XDTalk 100 Member Join Date: Aug 2007 Posts: 139	One-stop PG barrel + fitting + threading? I am looking at getting a Pistol Gear barrel for my Springfield XD .45 Service, threaded to host an SWR HEMS II Suppressor. Is there a one-stop-shopping solution to this? That is, is there a smith that is a distributor of Pistol Gear Match Tactical barrels who could fit that barrel to my firearm as well as cut it down and thread it to .578x28 pitch? My other alternative would be to buy a drop-in barrel in tactical length and have a smith I trust cut it down and thread it. If I could find someone to fit a Match barrel and thread it all at once that would be even better though. All thoughts appreciated.

02-20-2008, 08:29 PM	#3
Old School XDTalk 5K Member Join Date: Dec 2003 Location: Illinois Posts: 7,491	There are a few on XDTalk who have done what you want. Both Scott Springer (www.springerprecision.com) and Rich Dettelhouser (www.canyoncreekcustom.com) have the skills and tools to do what you want to do. I would go with the Match barrel, since it needs to be cut and crowned any how. You may as well get the most accuracy possible. Since you have the thread requirements, you need only send the gun, your new barrel and the can to either of these guys in order to have the pieces put together. Sounds like a fun project! OS __________________ Visit www.pistolgear.com for all of your XD needs!

02-23-2008, 02:47 PM	#6
BurntPocketHole XDTalk Member Join Date: Feb 2005 Location: PDX, OR Posts: 63	hmm this is a good thread for me to find. Im about to submit some form 4's to the atf next week for a 45 can. I need to get a barrel and have it threaded for my 45c. A one stop shop would be nice. I assume the pistolgear tactical barrels will work for this project. I dont want to order from EFK. Ill keep this in mind. __________________ XD40SC XD45C

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-20-2008, 05:44 PM	#2
Ed Ely XDTalk 5K Member Join Date: Mar 2001 Location: 37.65N -84.76W (Elev. 932 ft) Posts: 7,482 Blog Entries: 1	Yep! Make arrangements with Scott at PistolGear. He associates also with another forum sponsor who is on the West coast. Scott will take care of your needs. Ed

02-20-2008, 08:50 PM	#4
selectedmarksman XDTalk 100 Member Join Date: Aug 2007 Posts: 139	My XD is actually with Mr. Springer right now for sights and trigger work so I may be giving him some repeat business. Thanks for the the help. I loved my SWR HEMS II on my HK USPc .45 but with the XD being my new favorite it's only fair to set it up as a new host.