PistolGear Magwell for XD (First Pic Added, Post #30) - Page 2 - XDTalk Forums - Your HS2000/SA-XD Information Source!

Hooz · 02-09-2008, 08:43 PM

WOOHOO! Finally an IDPA legal magwell that isn't plastic!

I'll buy the first one Old School!

Collander · 02-09-2008, 08:44 PM

I am defentily interested for my .45!!!!!!! Thanks, OS, looking forward to this!

**Old School** · 02-09-2008, 10:05 PM

Quote:

Originally Posted by rogerxd45

on one mag well it was saying you had to cut out the things in the grip hole. is any permanent modification to the gun required with this one?

The only this permanent that you will need to do to the gun is remove the rectangular mold mark that is in the mood-shaped hole, if you XD has this mold mark. Some do, some don't.

To remove the mark, you need only a small file or Dremel tool.

OS

**R Dub** · 02-10-2008, 06:12 PM

I could probably rob the piggy bank for one of those Operator models.

**Old School** · 02-10-2008, 09:48 PM

Quote:

Originally Posted by R Dub

I could probably rob the piggy bank for one of those Operator models.

The Operator is good for both IDPA and USPSA Limited. The UnLimited is going to be big and wide. It will be hard to miss reloads with both options.

Reno82 · 02-10-2008, 11:37 PM

I want two.....

Collander · 02-10-2008, 11:49 PM

any chance of spy photos?

**Old School** · 02-11-2008, 09:13 AM

Quote:

Originally Posted by Collander

any chance of spy photos?

Give me until the end of the month. When I post the first pics, I want them to be representative of the final product.

OS

**Old School** · 02-11-2008, 09:13 AM

Quote:

Originally Posted by Reno82

I want two.....

Then you shall receive two.

**HPD SRT** · 02-11-2008, 09:19 AM

Quote:

Originally Posted by Old School

The Operator is good for both IDPA and USPSA Limited. The UnLimited is going to be big and wide. It will be hard to miss reloads with both options.

There is no limiton the size of magwell for limited is there? I didn't think there was, in that case you could use the unlimited in the Limited Division right?

02-09-2008, 08:43 PM	#11
Hooz XDTalk 2K Member Join Date: Feb 2006 Location: Hilliard, OH Posts: 2,095	WOOHOO! Finally an IDPA legal magwell that isn't plastic! I'll buy the first one Old School! __________________ XD-9 Tactical Member: IDPA, USPSA, ASSA, NRA, GOA

02-10-2008, 06:12 PM	#14
R Dub XDTalk 3K Member Join Date: Jun 2003 Location: Last Frontier Posts: 3,697 Blog Entries: 1	I could probably rob the piggy bank for one of those Operator models. __________________ Need XD Accessories? Support the XDTalk Sponsors. They support us! Need some competition? IDPA / USPSA

02-10-2008, 11:37 PM	#16
Reno82 XDTalk 1K Member Join Date: Jun 2007 Location: Alaska Posts: 1,347	I want two..... __________________ XD-45acp Service (Match Gun I changed it to a compact for CCW... did a grip chop on it) Ruger Mark III 22/45 Kimber SS Custom Target II 10mm Walther G22 (FUN GUN) XD-45acp Tactical (Match Gun II; upgraded the bbl from PistolGear) XD-9 Sub-Compact (Home Defense and CCW) DPMS AR-15: 9mm (1/17/08...) RRA CAR A4 Upper 223/5.56---did a lower bulid 6/3/08 and bought completed upper 2/21/08 S&W 642 38 special w/ CT grips (HD& CCW) Upper ALEX ARMS 19.5" 6.5 GRENDEL-order 9/9/08

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-09-2008, 08:44 PM	#12
Collander XDTalk 500 Member Join Date: Jan 2007 Location: Snohomish, WA Posts: 734	I am defentily interested for my .45!!!!!!! Thanks, OS, looking forward to this!

02-10-2008, 11:49 PM	#17
Collander XDTalk 500 Member Join Date: Jan 2007 Location: Snohomish, WA Posts: 734	any chance of spy photos?