Complete AR-15 kit - anyone have any experience with this outfit? - XDTalk Forums - Your HS2000/SA-XD Information Source!

Reeek · 05-15-2008, 11:21 AM

This looks like a ghreat way to get into my first AR for a good price with what appears rto be pretty good componenets. Anyone have any experience with this outfit or feedback? What about E.R Shaw barrels?

I'm tempted to snag one of these . . .

Welcome to Model 1 Sales' Online Order Center

Also, should I get the Wylde chamber in 5.56. Is there any issue with fouling the chamber since I would probably be using .223 95% of the time?

How hard is it to assemble the lower receiver assembly. This kit comes with a stripped lower to avoid the FFL most likely.

Everything is USA made.

Forgive me, I'm an AR neophyte.

**TMP** · 05-15-2008, 01:10 PM

I don't believe it comes with the lower or it would have to go thru an FFL.

Reeek · 05-15-2008, 01:25 PM

Quote:

Originally Posted by TMP

I don't believe it comes with the lower or it would have to go thru an FFL.

It says fully stripped lower or "lower receiver parts set" anyway

propellerhead · 05-15-2008, 01:43 PM

Quote:

Originally Posted by Reeek

This looks like a ghreat way to get into my first AR for a good price with what appears rto be pretty good componenets. Anyone have any experience with this outfit or feedback? What about E.R Shaw barrels?

I'm tempted to snag one of these . . .

Welcome to Model 1 Sales' Online Order Center

Also, should I get the Wylde chamber in 5.56. Is there any issue with fouling the chamber since I would probably be using .223 95% of the time?

How hard is it to assemble the lower receiver assembly. This kit comes with a stripped lower to avoid the FFL most likely.

Everything is USA made.

Forgive me, I'm an AR neophyte.

I got a similar rifle kit from Del-ton. Model1sales is in TX so they would have to add tax to my purchase. No issues with Del-ton. Lots of positive feedback on them on other forums.

Assembling the lower was easy. Just like your Legos as a kid. There's a video and instructions on ar15.com. I had the printed instructions and the laptop with the video and went at it. Got done in a little over an hour. If I do it again I'd be done in 15-20 mins. It's that simple. The only thing that takes time is identifying the right parts.

Yes, they sell it minus the receiver to avoid FFL requirements. It's best to get that locally.

Tally XD · 05-15-2008, 03:47 PM

Its best you get whatever you buy in 5.56mm. Even if you shoot .223 95% of the time, that other 5% could cause you trouble with the 5.56mm round in a .223 chamber.

**Ed Ely** · 05-15-2008, 06:53 PM

For sure the 5.56.

I have a problem with the cost
of all the add on's that they suggest
on the drop down boxes. Hello, at
their suggestion, one could rack up
a thousand bucks in no time at all.

Ed

ForTehNguyen · 05-15-2008, 06:55 PM

go with del-ton, rifle kits are priced well and are 5.56. If you get 5.56 dont have to worry about using .223/5.56 interchangably

I bought my midlength kit with some upgrades (RRA 2 stage trigger, new grips) and bought a stripped lower in town. Built it all for $950 with three 30 round magpul pmags

jeepinbanditrider · 05-15-2008, 07:28 PM

I just got the wife's 20" Model 1 Sales kit in today. It does not come with a receiver it's "less" lower receiver. I ordered a lower from a local dealer and I'm still waiting for it to come in. The kit made it from Texas to Coastal NC in 6 days time. It beat the Lower here and I ordered the lower a week before hand.

All the stuff seems to be of good build quality but I haven't put any rounds though it and don't plan to as it's the wife's and I want here to shoot it first and she's deployed right now.

Stuff I didn't really care for

The but plate on the A2 stock has a plastic trap door and door latch. Not sure why they cut costs there also the butt plate fit on the stock is "off" so to speak not lining up and leaving an "edge" on one side.

Reeek · 05-15-2008, 08:08 PM

Thanks, guys.

crpadiem · 05-21-2008, 01:03 PM

It does not come with a lower and they're good kits, not great but good.

05-15-2008, 11:21 AM	#1
Reeek XDTalk 1K Member Join Date: Jul 2007 Location: Reno, NV Posts: 1,248	Complete AR-15 kit - anyone have any experience with this outfit? This looks like a ghreat way to get into my first AR for a good price with what appears rto be pretty good componenets. Anyone have any experience with this outfit or feedback? What about E.R Shaw barrels? I'm tempted to snag one of these . . . Welcome to Model 1 Sales' Online Order Center Also, should I get the Wylde chamber in 5.56. Is there any issue with fouling the chamber since I would probably be using .223 95% of the time? How hard is it to assemble the lower receiver assembly. This kit comes with a stripped lower to avoid the FFL most likely. Everything is USA made. Forgive me, I'm an AR neophyte. __________________ U.S Navy Veteran - CTT - Naval Security Group Guns: XD9SC with Heinie Straight 8 Night Sights CZ P-01 with Meprolights - green/green EAA Witness (Tangfolio) Match .45 Taurus PT1911 with Heinie Straight 8 Night Sights Kel-Tec P3AT Fulton Armory FAR-15 Predator, 24" SS 1x12 Barrel w/Mueller TAC II Savage 93R17 BVSS .17 HMR Remington 870 18" 7+1 w/Choate Mark 6 Last edited by Reeek : 05-15-2008 at 12:53 PM.

05-15-2008, 01:10 PM	#2
TMP XDTalk 500 Member Join Date: Sep 2007 Location: Colorado Posts: 877	I don't believe it comes with the lower or it would have to go thru an FFL. __________________ ______________________ XD45 Tactical XD9 subcompact Wilson Border Patrol 870 Ruger 10/22 Beretta U22 Neos 6.0 INOX "Laws that forbid the carrying of arms. . . disarm only those who are neither inclined nor determined to commit crimes. . . Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than to prevent homicides, for an unarmed man may be attacked with greater confidence than an armed man." -- Jefferson`s "Commonplace Book," 1774-1776

05-15-2008, 03:47 PM	#5
Tally XD XDTalk 500 Member Join Date: Apr 2007 Location: North Florida Posts: 915	Its best you get whatever you buy in 5.56mm. Even if you shoot .223 95% of the time, that other 5% could cause you trouble with the 5.56mm round in a .223 chamber. __________________ You have a right to self defense! Vote *AGAINST* Obama!! ----------------------------------------- 2007 XD.45ACP Service (black) Mega "Gator" AR-15 5.56mm Remington 870 Tactical

05-15-2008, 06:55 PM	#7
ForTehNguyen XDTalk 500 Member Join Date: Feb 2008 Location: Houston, Texas Posts: 816	go with del-ton, rifle kits are priced well and are 5.56. If you get 5.56 dont have to worry about using .223/5.56 interchangably I bought my midlength kit with some upgrades (RRA 2 stage trigger, new grips) and bought a stripped lower in town. Built it all for $950 with three 30 round magpul pmags __________________ XD9 Service Black XD9 Subcompact Black w/ Heine NS AR15 16" Midlength

05-15-2008, 07:28 PM	#8
jeepinbanditrider XDTalk 4K Member Join Date: Jan 2007 Location: Mineral Wells, Tx Posts: 4,177	I just got the wife's 20" Model 1 Sales kit in today. It does not come with a receiver it's "less" lower receiver. I ordered a lower from a local dealer and I'm still waiting for it to come in. The kit made it from Texas to Coastal NC in 6 days time. It beat the Lower here and I ordered the lower a week before hand. All the stuff seems to be of good build quality but I haven't put any rounds though it and don't plan to as it's the wife's and I want here to shoot it first and she's deployed right now. Stuff I didn't really care for The but plate on the A2 stock has a plastic trap door and door latch. Not sure why they cut costs there also the butt plate fit on the stock is "off" so to speak not lining up and leaving an "edge" on one side. __________________ Stuff USPSA-A59201

05-15-2008, 06:53 PM	#6
Ed Ely XDTalk 5K Member Join Date: Mar 2001 Location: 37.65N -84.76W (Elev. 932 ft) Posts: 7,492 Blog Entries: 1	For sure the 5.56. I have a problem with the cost of all the add on's that they suggest on the drop down boxes. Hello, at their suggestion, one could rack up a thousand bucks in no time at all. Ed

05-15-2008, 08:08 PM	#9
Reeek XDTalk 1K Member Join Date: Jul 2007 Location: Reno, NV Posts: 1,248	Thanks, guys. __________________ U.S Navy Veteran - CTT - Naval Security Group Guns: XD9SC with Heinie Straight 8 Night Sights CZ P-01 with Meprolights - green/green EAA Witness (Tangfolio) Match .45 Taurus PT1911 with Heinie Straight 8 Night Sights Kel-Tec P3AT Fulton Armory FAR-15 Predator, 24" SS 1x12 Barrel w/Mueller TAC II Savage 93R17 BVSS .17 HMR Remington 870 18" 7+1 w/Choate Mark 6

05-21-2008, 01:03 PM	#10
crpadiem XDTalk 100 Member Join Date: May 2008 Location: North Carolina Posts: 172	It does not come with a lower and they're good kits, not great but good.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode