Savage MKII guys - XDTalk Forums - Your HS2000/SA-XD Information Source!

Gravel · 10-21-2007, 03:53 PM

You ever have any problems with loads hanging in the magazine?

My stock 10rd magazine will not load Stingers and sometimes hangs the MiniMag stuff too. They are a touch long and hang in the magazine. It blows through the bulk Federal like a dream.. Maybe its just a dislike for CCI stuff, I am not sure. Is this a problem for anyone else or do I just have a bum magazine.

Also, my MKII is pre AcuTrigger, anyone here running the Savage Match/Target trigger conversion?

Gravel · 10-26-2007, 09:37 AM

Buehler?

kart racer · 10-26-2007, 07:47 PM

I have a mark2 in 17hmr,the problems with 22's can be eliminated much of the time by bending the flat bar the mag slides up on a little bit forward.Watch what happens when you try to feed the round and you will see what I'm talking about.

Exmasonite · 10-27-2007, 10:19 AM

for the record, it's "Bueller"

I have a savage MkII. I've tried two 10 rd mags purchased new and have had major issues with them. the 5 rd-ers work fine with anything, though.

ZXD9 · 10-27-2007, 10:50 AM

I too run the Federal balk most of the time with no issues. I ran about 20 stingers through last week and didn't have any issues.

I did notice that the first round of each mag did shoot high/right or maybe it was just me.

aiformula · 10-27-2007, 07:49 PM

I ran Aquilla and CCI through my MkII w/ 10 rd mags only with no feed prolems. Sorry can't help you too much with this one.

10-21-2007, 03:53 PM	#1
Gravel XDTalk 2K Member Join Date: Jun 2007 Location: Bellingham Washington Posts: 2,009	Savage MKII guys You ever have any problems with loads hanging in the magazine? My stock 10rd magazine will not load Stingers and sometimes hangs the MiniMag stuff too. They are a touch long and hang in the magazine. It blows through the bulk Federal like a dream.. Maybe its just a dislike for CCI stuff, I am not sure. Is this a problem for anyone else or do I just have a bum magazine. Also, my MKII is pre AcuTrigger, anyone here running the Savage Match/Target trigger conversion? __________________ Those who trade liberty for security have neither. McCain/Palin '08

10-26-2007, 09:37 AM	#2
Gravel XDTalk 2K Member Join Date: Jun 2007 Location: Bellingham Washington Posts: 2,009	Buehler? __________________ Those who trade liberty for security have neither. McCain/Palin '08

10-27-2007, 10:50 AM	#5
ZXD9 XDTalk 100 Member Join Date: Jun 2005 Location: GA Posts: 297	I too run the Federal balk most of the time with no issues. I ran about 20 stingers through last week and didn't have any issues. I did notice that the first round of each mag did shoot high/right or maybe it was just me. __________________ Mark Z Springfield XD9 Tactical

10-27-2007, 07:49 PM	#6
aiformula XDTalk 3K Member Join Date: Oct 2004 Location: sw ohio Posts: 3,081	I ran Aquilla and CCI through my MkII w/ 10 rd mags only with no feed prolems. Sorry can't help you too much with this one. __________________ Tony Obama '08... change we can bereave in. Guns are like orgasms.......you just can't have enough good ones!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-26-2007, 07:47 PM	#3
kart racer XDTalk 100 Member Join Date: Oct 2004 Posts: 319	I have a mark2 in 17hmr,the problems with 22's can be eliminated much of the time by bending the flat bar the mag slides up on a little bit forward.Watch what happens when you try to feed the round and you will see what I'm talking about.

10-27-2007, 10:19 AM	#4
Exmasonite XDTalk 500 Member Join Date: Jan 2006 Posts: 811	for the record, it's "Bueller" I have a savage MkII. I've tried two 10 rd mags purchased new and have had major issues with them. the 5 rd-ers work fine with anything, though.