Posting for a Buddy - Good Trigger Work Guy

[Badshot]

Sorry Bill isn't posting this himself, This is a local Colorado guy who's doing most of his business by word of mouth and I'm just helping him out.

==========================================
Trigger work on HK 91, 93, 94, MP-5 PTR-91, all Century, SW-5, 3 and all other clones. Trigger creep reduced up to 94%+, rough feel is smoothed out, pull weight reduced to about 4.5lbs from the factory 10 to 12 lbs pull. $39 Minimize trigger slack take up and over travel add $15.
HK SEF full auto packs converted to semi $40 or $30 with trigger job.

Cetme.Trigger creep reduced up to 94%+, rough feel is smoothed out, pull weight reduced to about 5 lbs from the factory 10 to 12 lbs pull. Sear bar is unitized to the trigger to eliminate trigger slop. $39, option to reduce trigger over travel add $4.

Cetme/HK, PTR-91, CAI and all clones: Adjust Ejector for more positive ejection reliability, quite a few of these rifles do no not allow the ejector to fully ride up inside the bolt head for positive ejection $8.

SKS, Trigger creep reduced up to 90%+, rough feel is smoothed out, pull weight reduced to about 4.5 lbs. $29.

M1 Garand, M1A/M14, Ruger Mini-14, Trigger pull lighten up to 15%, rough feel is smoothed out, nice reduction in trigger creep. Takeup creep ruduced up to 80%. $30

AR-15, AR-10, all makes, 3.75 to 4lbs pull, very short, smooth clean break, trigger staging/creep eliminated $32, 2.75 to 3lbs pull add $14 (JP spring set installed). Remove hammer tail for better ignition add $5.

RRA NM trigger group reduce takeup 90%, drop pull weight to 2.75 to 3lbs. $32

Robinson XCR and M96, 4 to 4.5lbs pull, very short, smooth clean break, trigger staging/creep eliminated $45

AK-47, 3.75 to 4lbs pull, very short, smooth clean break, trigger staging/creep eliminated $40

Armalite AR180b, 3.75 to 4lbs pull, very short, smooth clean break, trigger staging/creep eliminated $35

AR180, Sterling, Howa, Costa Mesa sheet metal receiver models: 5lbs, clean break, no creep. $35

Daewoo .223 all models, 3.75 to 4lbs pull, very short, smooth clean break, $35

FAL all models, 4.5 to 5lbs pull, very short, smooth, clean break, over travel significantly reduced $29

Ruger 10/22 2.75 to 3lbs pull, very short, smooth, clean break, $24

Uzi, FA and Semi reduced trigger creep and clean break. $35

Thompson all models, semi & FA, reduced trigger creep and clean break $35

Marlin Camp, 4lbs pull, very short, smooth clean break, $30

I can work most semi-auto rifles and shotguns email with your model for specifics.

10+ years experience, satisfaction guaranteed or your money back.

RETURN POSTAGE included in the price! 24 to 48 hour turnaround time. All that is needed is the trigger assembly, or trigger parts. Most customers receive their completed work in about a week of sending it out. References available

email if interested.

Thanks,
Bill Springfield

new email address: wspringfield@comcast.net