Just purchased a very ugly gun ... (man I could punch myself for selling my xdm)This is a discussion on Just purchased a very ugly gun ... (man I could punch myself for selling my xdm) within the Non-XD Handguns forums, part of the Other Handgun Talk category; Some may have read my other thread on here. I wanted to get my fiancé a ring , so I made the worst decision in ...
 |
|
05-14-2012, 04:55 PM
|
#1
|
|
XDTalk 2K Member
Member #: 71939
Join Date: Mar 2012
Location: North Florida
Posts: 2,529
|
Just purchased a very ugly gun ... (man I could punch myself for selling my xdm)
Some may have read my other thread on here. I wanted to get my fiancé a ring , so I made the worst decision in my life to sell my XDm 45c , and LCR -- so I can get ONE decent gun .. And a nice ring for my (then fiancé). I sold my two favorite guns and figured I'd grab a S&W Shield. Got it , and then see a FB picture that abruptly ended the engagement.
I sold my XDm for $550 , I had paid $690+ tax , and and had James install TFO's , I had a leather iwb.... So I took a huge loss. I also lost around $100 on the LCR.
I hadn't fired the Shield , but put TFO's on it....
After going back and forth with myself -- and going with my gut , I sold the Shield. I took a small loss , and whenever I have enough money saved up I will DEFINITELY purchase another one. The thing is -- I now live alone , and going from 13rd of .45 by my bed , and 5 rounds of .357 -- to 8 shots of .40 (for me) wasn't a good feeling despite how well the shield felt and the amazing size of it.
I don't have the $$ to replace my $700+ XDm , but I will not let a woman bring me all the way down. I decided I will put $50 worth of furniture on my WASR , and get the most I can out of a pistol in the $500 range.
So I bought this ugly , ugly , ugly Block 29 10mm. I no longer feel undergunned , and despite it being ugly -- I like the 10mm round , and feel this is the best platform for it. I deeply regret selling my XDm , it was perfect and IMO the best semi money can buy.
So now I have some change in the bank , and for $550 (what I paid for the shield + TFO's) here's what I got. (tapco handguard , new red/green dot and g29)
Tried to join blocktalk forums but I guess they make you wait a year of so for "approval".
Notes : The Glock (for me) was a pain in the ass to strip. My big nail less fingers pushing the takedown "buttons" on each side down hurt like hell. And on top of that -- when I reassembled the gun I pulled the slide back and everything got "stuck". I took it to the LGS and after a laugh it was "fixed" in 3 seconds. I apparently aligned the guide rod and recoil spring wrong.
Any tips for field stripping to avoid the issue I had this morning ? And any mods I should look at ? I'm thinking TFO's is first next month -- but I don't know anything about glocks , and their forum won't "approve" me for weeks (what I hear).
And I'm doing well -- and going to find another woman who can fulfill my life , and not looking back.
Sent from my iPad 3rd Gen. using Tapatalk HD
__________________
NRA Member (Dec 2012)
Current Carry : XDm 4.5" .40
(awaiting to become verified supporting vendor guys)
|
|
|
05-14-2012, 04:58 PM
|
#2
|
|
XDTalk 1K Member
Member #: 64083
Join Date: Oct 2011
Location: Lubbock tx
Posts: 1,688
|
Sorry about the girl and really sorry about the guns. Good luck!
__________________
Live free or die hard
|
|
|
05-14-2012, 05:09 PM
|
#3
|
|
XDTalk 500 Member
Member #: 55193
Join Date: Mar 2011
Location: Levittown, PA
Posts: 895
|
Dam man you've been through a lot these past few weeks..... A lot of selling and buying. I have a lot of glocks very easy to strip, make sure it clear, pull the trigger so its set back, basically cock the slide maybe an 1" holding it in that position slide down both of the tabs. Let go the slide and it should properly fall off, pull the spring out and barrel just as you do most semi autos. When done put the barrel back and the recoil spring, slide the slide on the rails and bam your done.
Glocktalk approves instantly, I've been a member there for I believe 2years unless they changed there registration process approval is instant, a few months ago they got hacked and registrations weren't getting approved but since then they upgraded there security and back to normal.
Good luck with everything I'm one that believes everything happens for a reason even if you do not seeing during the hurtful time.
Take care
__________________
G19C,G23C,G30,G32 Springfield Armory XD40 Service Smith and Wesson Bodyguard .380 Magnum Research Desert Eagle Smith and Wesson .500
|
|
|
05-14-2012, 05:28 PM
|
#4
|
|
XDTalk 2K Member
Member #: 71939
Join Date: Mar 2012
Location: North Florida
Posts: 2,529
|
Quote:
Originally Posted by Reese
Dam man you've been through a lot these past few weeks..... A lot of selling and buying. I have a lot of glocks very easy to strip, make sure it clear, pull the trigger so its set back, basically cock the slide maybe an 1" holding it in that position slide down both of the tabs. Let go the slide and it should properly fall off, pull the spring out and barrel just as you do most semi autos. When done put the barrel back and the recoil spring, slide the slide on the rails and bam your done.
Glocktalk approves instantly, I've been a member there for I believe 2years unless they changed there registration process approval is instant, a few months ago they got hacked and registrations weren't getting approved but since then they upgraded there security and back to normal.
Good luck with everything I'm one that believes everything happens for a reason even if you do not seeing during the hurtful time.
Take care
|
Thanks man and tell me about it !!! I tried to return the Shield , but the LGS said "they are hot right now and I would sell it privately -- you'd get much more then we can give you". I told him I just sold 2 guns and don't like private sales -- he said I'm fine and I sold it to a CCW owner (nice guy).
I don't know what the hell I did wrong when reassembling that sucker this morning ... The barrel and rod were sticking out -- and everything was stuck. My LGS said I most likely didn't align the spring correctly ???
And I applied at glocktalk this morning and have yet to be approved
__________________
NRA Member (Dec 2012)
Current Carry : XDm 4.5" .40
(awaiting to become verified supporting vendor guys)
|
|
|
05-14-2012, 05:40 PM
|
#5
|
|
XDTalk 100 Member
Member #: 64107
Join Date: Oct 2011
Posts: 103
|
That must of been a ****** pic to have ended an engagement that you obviously put much time and effort into, not to mention finances.
Sorry man about what happened, but good job on moving on.
|
|
|
05-14-2012, 05:44 PM
|
#6
|
|
XDTalk 500 Member
Member #: 55193
Join Date: Mar 2011
Location: Levittown, PA
Posts: 895
|
Should have sold it on here, I was interested in one for my wife but ended up getting her the sig p238 with titanium rainbow finish I hate it but she likes it.
Not sure what's going on with glocktalk I would contact an admin to see wassup.
Good luck with everything man.
__________________
G19C,G23C,G30,G32 Springfield Armory XD40 Service Smith and Wesson Bodyguard .380 Magnum Research Desert Eagle Smith and Wesson .500
|
|
|
05-14-2012, 05:49 PM
|
#7
|
|
XDTalk 100 Member
Member #: 72349
Join Date: Apr 2012
Location: Arizona
Posts: 366
|
Ugh, sorry to hear about both. You'll recover though, you always do. Chin up!
|
|
|
05-14-2012, 06:07 PM
|
#8
|
|
XDTalk 500 Member
Member #: 70408
Join Date: Feb 2012
Location: Wilson, NC
Posts: 559
|
Minkman555,
Sorry to hear about your bad luck. Both with guns and women.
I suppose the only encouragement that I can offer is this:
Most guys don't want either an ugly gun, or an ugly woman. But if you have these, you don't have to be too concerned about either being taken away.
The big problem, with good looking guns, or good looking women, is that EVERYBODY wants them.
Your best bet with women, is to find a big, fat, tattooed woman. That way, you'll have shade in the summer, heat in the winter, and moving pictures all year around.
I don't know about your gun. You just may be screwed there...
Please take this as intended. I'm just trying to add some humor to a bad situation. I feel your pain. I've been there myself.
I wish you better luck the next time around. Really.
Thanks,
Duane
__________________
1911-A1
XD(m) .45 ACP, 5.25", Bi-Tone
XDS .45 ACP, Bi-Tone
|
|
|
05-14-2012, 06:27 PM
|
#9
|
|
XDTalk Member
Member #: 68626
Join Date: Jan 2012
Location: North Carolina
Posts: 75
|
luckiest guy in the room
You don't believe right now but I can find 1000's of guys who would agree with me. Your smartin' right now - being decieved hurts.
But so you are out a few hundred bucks big deal. Great news you found out about her now not later. I would have cost thousands later. Count your blessings.
Me and half of the men in the country would have loved to have gotten off so easily.
You will recover and in 6 months, it will be old news.
Suck it up and go live your life. More guns are made every day.
|
|
|
05-14-2012, 07:22 PM
|
#10
|
|
XDTalk 100 Member
Member #: 71466
Join Date: Mar 2012
Posts: 115
|
Yes you are fortunate, better an ugly gun than none and better either than a bad marriage.
Please take away from this never selling **** to make a wedding/present anything happen. You would have been bitter about it no matter what you think. I've known buddies that did that, hell when I was 16 I sold a 10/22 my grandfather had left me to be able to take a girl I was convinced I was in love with to a winter formal.
Next time you'll go into it right, buy her what you can afford or don't buy it, and you'll watch facebook real close before selling guns
Oh, and if you ever decide to buy a ring again email me, I'll give my usual lecture/educational speech on why diamonds are a complete scam and how to buy your "insert romantic interest title here" something that will be pretty and actually have some value.
Red
|
|
|
Lower Navigation
|
|
|
| Search tags for this page |
|
40 cal handguns for sale, handguns for women, m&p shield .40 for sale, m&p shield 40 cal for sale, m&p shield barrel for sale, m&p shield for sale, m&p shield for sale in nc, m&p shield match barrel, s&w 40 cal for sale, s&w shield for sale, s&w shield for sale in nc, smith and wesson m&p shield 40 cal for sale, smith and wesson shield for sale in nc, smith and wesson shield for sale nc, who sells the most s&w shield
|
| Thread Tools |
|
|
| Display Modes |
Linear Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|