XD40 not chambering - Page 2 - XDTalk Forums - Your HS2000/SA-XD Information Source!

leeindy · 03-27-2007, 10:46 PM

+1 for new springs. and polish the feed ramp if you havent already

40SWXDSHOOTER · 03-27-2007, 11:03 PM

If the ammo, and the mags work in another XD, then there is something wrong with your gun, hate to say it but you might need to send it off,

DNM · 03-28-2007, 05:04 PM

Quote:

Originally Posted by Don

New ammo or reloads?

Reloads Don.

03-28-2007, 05:55 PM

Make sure all rounds are seated in the mag in the back CLOSEST TO THE REAR OF THE GRIP. I had this problem with my 45xd and I polished the ramp & put a .045 radius on the edge of the ramp. THAT STOPPED IT FOR GOOD,. I've fired 1500 rnds since without a jam.

crzybotr · 04-24-2007, 06:56 AM

do you check all you reloads w/ a case gage? and make sure your sizing die is set all the way down.
i had a similar problem, and it was my sizing die not my gun.

**agalindo** · 04-24-2007, 07:25 AM

Quote:

Originally Posted by DNM

Reloads Don.

Check the OAL of the reloads. This kind of problem is usually caused by rounds that are too long. Check the reload manual for the OAL for the bullet weight and type you using.

03-27-2007, 10:46 PM	#11
leeindy XDTalk 2K Member Join Date: Apr 2006 Location: montana Posts: 2,892	+1 for new springs. and polish the feed ramp if you havent already __________________ USAF F-15 Attack Control Specialist / Range Officer / Defensive Pistol Instructor "A fear of weapons is a sign of retarded sexual and emotional maturity" Sigmund Freud Anchorage Practical Shooters Club aka ANPRACS ANPRACS Match Videos click here and here USPSA # A-58756 IDPA # A28338 Co-Founder of the OFFICIAL XDtalk Competition League Another good gun forum http://www.nationalgunforum.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-27-2007, 11:03 PM	#12
40SWXDSHOOTER XDTalk 500 Member Join Date: Sep 2005 Location: Minnesota Posts: 891	If the ammo, and the mags work in another XD, then there is something wrong with your gun, hate to say it but you might need to send it off,

03-28-2007, 05:55 PM	#14
pookie Guest Posts: n/a	Make sure all rounds are seated in the mag in the back CLOSEST TO THE REAR OF THE GRIP. I had this problem with my 45xd and I polished the ramp & put a .045 radius on the edge of the ramp. THAT STOPPED IT FOR GOOD,. I've fired 1500 rnds since without a jam.

04-24-2007, 06:56 AM	#15
crzybotr XDTalk Member Join Date: Sep 2004 Posts: 35	do you check all you reloads w/ a case gage? and make sure your sizing die is set all the way down. i had a similar problem, and it was my sizing die not my gun.