![]() |
|
|
|
|||||||
| Register | Forum Rules | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| XDTalk Memberships | Gold Sponsorships | XDTalk Sponsors | XDTalk Pro Logo Shop | Photo Gallery | Wiki | ChatBox |
|
Welcome to the XDTalk Forums - Your HS2000/SA-XD Information Source! forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Also, registering gets you started on gaining access to The Trading Post and Blogs after 30 days and 100 posts! Registration is fast, simple and absolutely free so please, join our community today! |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 |
|
XDTalk Member
|
Accuracy
I've been noticing an accuracy problem at the range. Maybe somebody here would be able to help. The first 50 shots or so each day seem to go about seven inches low and left, then after that it seems to be much closer to point of aim. Has anybody else had this problem or heard of it? It's not just my shooting either, it's anybody I let shoot the gun.
__________________
Springfield XD 9... Rounds through: 1100, FTF: 0 Remington 870 Express Magnum Remington 710 Remington 597 |
|
|
|
|
|
#2 |
|
XDTalk 4K Member
|
Are you right handed, and are they right handed? Maybe it is you, and after 50 rounds you start picking up on what's being done wrong and you change it.. even if you don't realise you do that? It took me over 1000 rounds through my XD before my hands got enough muscle memory to be fairly consistant with accuracy.
Unless you can tell that your sights are off, any low left, low right, is almost always something to do with the shooter. Most left handed shooters shoot low right, and right handed go low left. Just takes practice with the gun to get the technique down good so you overcome that. All has to do with trigger control, and not flinching. Buy some dummy rounds, have someone mix as many as htey want in with live ammo in your magazine at the range then shoot. Once you hit the dummy round, and have no clue where it is beforehand.. you get a click, but no fire. If your muzzle dips down, you're flinching. And trigger control is the way to keep your shots centered up. Just have to make sure your grip is tight and you aren't tightening it while you are pulling the trigger. Make sure your finger is in the trigger somewhere in the center of your finger pad. Take things slow, slowly take up the slack in the trigger, then give a nice steady pull clear to the back until the gun fires. Moving the fingertip in and out on the trigger can help bring shots in or out. Also make sure you are staring at your front sight. Focus ONLY on the front sight. You can tell where it is aimed at on the target. Keep staring at that front sight while you are pulling the trigger, and keep staring at it after you have fired the shot. Watch the sight fall back down after recoil. Only then should you even look at where the shot hit. If you were focused on the front sight, and aimed properly at the target it should hit where you wanted it to. But you really have to make sure you stare and focus only on that. And make sure to keep that grip nice and tight, you won't break it. |
|
|
|
|
|
#3 |
|
XDTalk Member
|
I'll keep all that in mind today when I go to the range. Thanks for all the help.
__________________
Springfield XD 9... Rounds through: 1100, FTF: 0 Remington 870 Express Magnum Remington 710 Remington 597 |
|
|
|
| Thread Tools | |
| Display Modes | |
|
|