Anyone have XD45 mags fall out - XDTalk Forums

wellthought · 06-17-2009, 12:48 AM

Out of eleven 13 round mags fired out of my NEW XD45 (with the manual thumb safety) one magazine dropped about 1/4 inch out while I was shooting. Here are the facts:

1. It happened after emptying a full magazine. The slide locked back. I removed the empty magazine and inserted a new 13 round magazine. I pulled the slide rearward, to drop the slide stop, then released the slide to load the first round in the chamber.

2. I have never owned any handguns with ambidextrous mag release buttons.

3. I bought and sold a NEW XD45 about 18 months ago because this happened three times with that one.

4. I called Springfield Armory customer service and they said that they have never heard of this before and that the magazine falling out is next to impossible to happen and that the problem likely rests with me.

5. I strongly believe that something is wrong with MY technique with this gun.

6. Everything else about this gun has been absolutely flawless and I really like this gun.

7. I think my finger may have partially (or fully) pressed one of the mag release buttons while racking the slide. The mag drop happened at about round #3 or 4.

Has this happened to anyone else here? If so, how did you overcome it?

If not, how would you suggest that I overcome it? I have been practicing. The mag drop occurred on the 5th magazine. It hasn't happened since.

jrock · 06-17-2009, 02:00 AM

Gotta make sure you fully get the mag in there. On my XD45 it kinda locks a lil bit right beofre it actually does lock in place. Make sure you are getting it all the way in. Smash that mag right on in there! lol

thelongone13 · 06-17-2009, 04:09 AM

Quote:

Originally Posted by jrock

Gotta make sure you fully get the mag in there. On my XD45 it kinda locks a lil bit right beofre it actually does lock in place. Make sure you are getting it all the way in. Smash that mag right on in there! lol

What I do, it works too.

jkw_XD · 06-17-2009, 09:44 AM

Quote:

Originally Posted by thelongone13

What I do, it works too.

+2.. I usually give my XD40 mag a quick tap with the palm of my hand once I have pushed it in.. Just to be sure

wellthought · 06-17-2009, 10:24 AM

I'll develop a habit of that. Thanks for the input.

**Dirty Rod** · 06-17-2009, 11:13 PM

I've had it happen a few times. Once I had just detail stripped my XD and didn't put the catch back together correctly and another occurred after putting 600 rounds through my other XD during a training class. Mags had hit the dirt a few times and were dirty. A good cleaning and all was good. I've also seen a bent mag cause it.

carhartt · 06-17-2009, 11:22 PM

You might have thought of this, maybe not though. Is it possible that every once in awhile you bump the mag release when shooting? I might be blowing smoke, but lets get the obvious reasons out of the way. Other than that, I have never had this happen to my xd 45 tac.

Hope you get it resolved.

wellthought · 06-17-2009, 11:32 PM

Thanks for the replies. I think I've got the problem solved as long as I am sure to keep my fingers away from the mag release buttons when firing and when racking the slide. I did buy an extra mag from Midway USA and it looks a little indented where the mag catch hole is. I'd better ask for an exchange to be safe.

RX-LBC · 06-18-2009, 08:52 AM

I had this happen this weekend after installing a CT laser grip. The laser has a nice ridge that my thumb found to rest on but it placed my right thumb over the mag release. Doing some double tap drills I had the mag drop. Took a while to figure it out but it was 100% me and not the XD.

wellthought · 06-18-2009, 09:18 AM

This rare little nuance means practice, practice, practice.

06-17-2009, 12:48 AM	#1
wellthought XDTalk Newbie Join Date: Jun 2009 Posts: 9	Anyone have XD45 mags fall out Out of eleven 13 round mags fired out of my NEW XD45 (with the manual thumb safety) one magazine dropped about 1/4 inch out while I was shooting. Here are the facts: 1. It happened after emptying a full magazine. The slide locked back. I removed the empty magazine and inserted a new 13 round magazine. I pulled the slide rearward, to drop the slide stop, then released the slide to load the first round in the chamber. 2. I have never owned any handguns with ambidextrous mag release buttons. 3. I bought and sold a NEW XD45 about 18 months ago because this happened three times with that one. 4. I called Springfield Armory customer service and they said that they have never heard of this before and that the magazine falling out is next to impossible to happen and that the problem likely rests with me. 5. I strongly believe that something is wrong with MY technique with this gun. 6. Everything else about this gun has been absolutely flawless and I really like this gun. 7. I think my finger may have partially (or fully) pressed one of the mag release buttons while racking the slide. The mag drop happened at about round #3 or 4. Has this happened to anyone else here? If so, how did you overcome it? If not, how would you suggest that I overcome it? I have been practicing. The mag drop occurred on the 5th magazine. It hasn't happened since.
	Share

06-17-2009, 02:00 AM	#2
jrock XDTalk Newbie Join Date: Feb 2009 Posts: 15	Gotta make sure you fully get the mag in there. On my XD45 it kinda locks a lil bit right beofre it actually does lock in place. Make sure you are getting it all the way in. Smash that mag right on in there! lol
	Share

06-17-2009, 10:24 AM	#5
wellthought XDTalk Newbie Join Date: Jun 2009 Posts: 9	I'll develop a habit of that. Thanks for the input.
	Share

06-17-2009, 11:13 PM	#6
Dirty Rod XDTalk 500 Member Join Date: Sep 2008 Location: Phoenix AZ Posts: 518	I've had it happen a few times. Once I had just detail stripped my XD and didn't put the catch back together correctly and another occurred after putting 600 rounds through my other XD during a training class. Mags had hit the dirt a few times and were dirty. A good cleaning and all was good. I've also seen a bent mag cause it. __________________ Dirty Rod -------------------------------------------- AR-15, MP5, HK91, Springfield 1911-A1 Custom, Springfield SS Champion, Kimber Pro Carry II Plus, XD45c w/barrel, sights, trigger, etc, Remmy 700, Mossberg 500 Cruiser for things that go bump ...
	Share

06-17-2009, 11:22 PM	#7
carhartt XDTalk 1K Member Join Date: Jan 2009 Posts: 1,008	You might have thought of this, maybe not though. Is it possible that every once in awhile you bump the mag release when shooting? I might be blowing smoke, but lets get the obvious reasons out of the way. Other than that, I have never had this happen to my xd 45 tac. Hope you get it resolved.
	Share

06-17-2009, 11:32 PM	#8
wellthought XDTalk Newbie Join Date: Jun 2009 Posts: 9	Thanks for the replies. I think I've got the problem solved as long as I am sure to keep my fingers away from the mag release buttons when firing and when racking the slide. I did buy an extra mag from Midway USA and it looks a little indented where the mag catch hole is. I'd better ask for an exchange to be safe.
	Share

06-18-2009, 08:52 AM	#9
RX-LBC XDTalk Newbie Join Date: Jan 2009 Location: Maryland, USA Posts: 17	I had this happen this weekend after installing a CT laser grip. The laser has a nice ridge that my thumb found to rest on but it placed my right thumb over the mag release. Doing some double tap drills I had the mag drop. Took a while to figure it out but it was 100% me and not the XD.
	Share

06-18-2009, 09:18 AM	#10
wellthought XDTalk Newbie Join Date: Jun 2009 Posts: 9	This rare little nuance means practice, practice, practice.
	Share

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode