Xd 40 20 round mags!!!! - Page 2 - XDTalk Forums - Your HS2000/SA-XD Information Source!

**Grip** · 05-16-2008, 01:00 PM

my brother got me a "20 round Pro-Mag" for my XD-9 on my b-day.

i ditched the promag follower, base pad, and spring....then i used an XD base pad, XD follower, and an Arredondo extra power magazine spring used for thier extended base pad's.

my Pro-Mag now functions properly, feeds great, and holds 22-9mm round's.

i still use an XD magazine to hold my home defense ammo, but the Pro-Mag is a fun gadget at the range.

Small Arms · 05-17-2008, 01:56 AM

Quote:

Originally Posted by Ishpeck

On the XD-M, you'll get a 16-rounder. On the Ye olde XD40 classic, you get 12 rounds per mag.

That's what I said---it comes standard with 16-round mags.

I've been an XD fan for a few years now, have bought more than one, and am familiar with all their models. Thanks!

azguns0331 · 05-19-2008, 12:58 AM

Quote:

Originally Posted by havoc2s6

I would put a link if i knew how. But I found a site Sportsman's Guide- Discount Hunting Gear, Discount Hunting Boots, Discount Shoes, Discount Ammunition, Discount Ammo, Discount Boots, Military Surplus, Outdoor Gear they have them there.. I checked into it as well. They say they are made by SA but I called SA and they said they have never made a 20 round mag. I ordered one but they also will refund it if I am not happy with the product. So I will have to wait and see.

Yup i bought one today, had a few SG coupons sitting around.
Its for my xd9 so it might need some adjusting, but for the price, **** it

Palmguy · 05-19-2008, 03:35 AM

Quote:

Originally Posted by Small Arms

That's what I said---it comes standard with 16-round mags.

I've been an XD fan for a few years now, have bought more than one, and am familiar with all their models. Thanks!

He quoted you but he was responding to this person:

Quote:

Originally Posted by SpringfieldXD.40

The SA XD-40 mags hold twelve....I assume the OP is talking about some aftermarket mags of some sort...

417XD · 05-20-2008, 06:04 AM

Yes, promag makes them and I did have feed problems on my .40sc , but i also did on my factory 12rd mags. I did the slide mod that is posted in the general forum and that took care of both issues.

victormcdonough · 05-20-2008, 03:29 PM

prolly talkin bout the new xd-40m mags they are 16 rounds ....

MadBadger · 05-20-2008, 07:34 PM

Actually, guys, the new XDM mags hold 16 rounds, whereas the original XD40 mags only hold 12.

motiv8ya · 05-26-2008, 05:16 AM

I bought three of Promag's 20 rounders for my XD40 4". Two of them failed to feed every round, the third one broke the ejector on both my 4" and 3" 40's while firing the two rounds that it actually fed. The tip of the ejector hit me in the glasses while firing both times. The guns still functioned with the broken ejectors and the SA mags until I got the new ejectors to swap out. Needless to say I shipped that crap right back to promag. The followers in the promags looked like some generic piece that they ground down on a bench grinder, looked nothing like the SA mag followers.

05-16-2008, 01:00 PM	#11
Grip XDTalk 1K Member Join Date: Oct 2007 Location: Illinois Posts: 1,195	my brother got me a "20 round Pro-Mag" for my XD-9 on my b-day. i ditched the promag follower, base pad, and spring....then i used an XD base pad, XD follower, and an Arredondo extra power magazine spring used for thier extended base pad's. my Pro-Mag now functions properly, feeds great, and holds 22-9mm round's. i still use an XD magazine to hold my home defense ammo, but the Pro-Mag is a fun gadget at the range. __________________ 2008 AR Build...(Mega, LMT, Magpul, Troy, KNS, RRA, PRI, Young MFG) 2007 XD-9 Service, 2,225 shots fired since 12-20-07 (zero problem's)

05-20-2008, 07:34 PM	#17
MadBadger XDTalk 100 Member Join Date: Jan 2007 Location: JeffCo, MO Posts: 180	Actually, guys, the new XDM mags hold 16 rounds, whereas the original XD40 mags only hold 12. __________________ democracy (dē·mok·ra·si), n. 51 tyrants and 49 subjects pretending to be morally superior to despotism Missouri Carry -Concealed Carry News and Events http://www.missouricarry.com/forums I support "tactically inferior" carry methods! http://www.opencarry.org

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-20-2008, 06:04 AM	#15
417XD XDTalk Newbie Join Date: May 2008 Posts: 3	Yes, promag makes them and I did have feed problems on my .40sc , but i also did on my factory 12rd mags. I did the slide mod that is posted in the general forum and that took care of both issues.

05-20-2008, 03:29 PM	#16
victormcdonough XDTalk Newbie Join Date: May 2008 Location: Michigan Posts: 2	prolly talkin bout the new xd-40m mags they are 16 rounds ....

05-26-2008, 05:16 AM	#18
motiv8ya XDTalk Member Join Date: May 2008 Posts: 52	I bought three of Promag's 20 rounders for my XD40 4". Two of them failed to feed every round, the third one broke the ejector on both my 4" and 3" 40's while firing the two rounds that it actually fed. The tip of the ejector hit me in the glasses while firing both times. The guns still functioned with the broken ejectors and the SA mags until I got the new ejectors to swap out. Needless to say I shipped that crap right back to promag. The followers in the promags looked like some generic piece that they ground down on a bench grinder, looked nothing like the SA mag followers.