PowderRiver Trigger mod (video) - Page 7 - XDTalk Forums - Your HS2000/SA-XD Information Source!

ichy_trigger · 03-07-2008, 02:28 PM

If you prefer, you can drill a hole in the frame for the overtravel screw. Here is where you can get the drill bit for it... You will also need a 4-40 Tap
Qualtech Size #43

**powder river** · 03-07-2008, 07:41 PM

Quote:

Originally Posted by ichy_trigger

If you prefer, you can drill a hole in the frame for the overtravel screw. Here is where you can get the drill bit for it... You will also need a 4-40 Tap
Qualtech Size #43

Thanks for all the support ichy_trigger. But I DO NOT tap the hole in the plastic, when installing the screw in the frame. I let the screw cut it's own threads in the plastic. This will give you 100% thread contact instead of the 75% that you get with a taped hole. The result is a much tighter fitting screw.

wow that is a drill bit

ichy_trigger · 03-07-2008, 08:01 PM

Quote:

Originally Posted by powder river

Thanks for all the support ichy_trigger. But I DO NOT tap the hole in the plastic, when installing the screw in the frame. I let the screw cut it's own threads in the plastic. This will give you 100% thread contact instead of the 75% that you get with a taped hole. The result is a much tighter fitting screw.

wow that is a drill bit

I knew that, I guess I had too many beers and tried to think...lol

propellerhead · 03-07-2008, 09:36 PM

Quote:

Originally Posted by Fastsc92

For those that want another method for overtravel.....I just got my part in on Sat. and I installed everything in about 20 min. I chose to drill into the frame with a #43 drill and let the set screw cuts its own threads into the plastic. This was the prefered method after talking to Daniel at Powder River.

What kind of drill did you use? Can you post a pic of how you drilled the frame? With my drill, it's almost at a 45 degree angle.

Fastsc92 · 03-07-2008, 09:42 PM

I used a normal drill, and a normal length bit. I center punched the hole first to help start the drill bit, and just drilled very slowly. The hole isn't 90* to that face, but its tilted around a 15* angle. Not really a big deal. When the bar comes in contact with the screw they touch so that the faces are flush.

propellerhead · 03-08-2008, 07:12 AM

Would you mind posting more pics? Pics at different angles? Thanks.

ichy_trigger · 03-08-2008, 07:33 AM

Quote:

Originally Posted by propellerhead

Would you mind posting more pics? Pics at different angles? Thanks.

Take a look back up or at the beginning of the link I posted for a 12" drill bit. Its less than $5.00 to purchase and would make drilling the hole in the frame much easier.

propellerhead · 03-08-2008, 07:42 AM

I saw that but I'd rather not add cost if it can be avoided. I'm hoping Fastsc92 can post more pics so I can get a better idea of how a regular drill and bit will do it. Just want to get a better preview. If it still appears tricky then I might consider the 12" drill bit. Or just selling this kit.

ichy_trigger · 03-08-2008, 07:55 AM

Quote:

Originally Posted by propellerhead

I saw that but I'd rather not add cost if it can be avoided. I'm hoping Fastsc92 can post more pics so I can get a better idea of how a regular drill and bit will do it. Just want to get a better preview. If it still appears tricky then I might consider the 12" drill bit. Or just selling this kit.

PM sent

Fastsc92 · 03-08-2008, 09:27 AM

Sorry guys, I don't have any other pics at the moment and I wont be able to take anymore until next weekend.

03-07-2008, 02:28 PM	#61
ichy_trigger XDTalk 5K Member Join Date: Jan 2004 Location: Dayton, Ohio Posts: 8,101	If you prefer, you can drill a hole in the frame for the overtravel screw. Here is where you can get the drill bit for it... You will also need a 4-40 Tap Qualtech Size #43 __________________ "The person who has nothing for which he is willing to fight, nothing which is more important than his own personal safety, is a miserable creature and has no chance of being free unless made and kept so by the exertions of better men than himself." http://militarysignatures.com/signatures/member2645.png

03-07-2008, 09:42 PM	#65
Fastsc92 XDTalk Member Join Date: Dec 2007 Location: Salem, NH Posts: 82	I used a normal drill, and a normal length bit. I center punched the hole first to help start the drill bit, and just drilled very slowly. The hole isn't 90* to that face, but its tilted around a 15* angle. Not really a big deal. When the bar comes in contact with the screw they touch so that the faces are flush. __________________ XD-9 Service Sig Mosquito

03-08-2008, 07:12 AM	#66
propellerhead XDTalk 3K Member Join Date: Apr 2006 Location: Foat Wurth, TX Posts: 3,576	Would you mind posting more pics? Pics at different angles? Thanks. __________________ XD-9 Tactical for IDPA, XD-40 Subcompact for concealed carry, XD-45 Service for home defense. Three calibers, three models, three purposes. No compromises.

03-08-2008, 07:42 AM	#68
propellerhead XDTalk 3K Member Join Date: Apr 2006 Location: Foat Wurth, TX Posts: 3,576	I saw that but I'd rather not add cost if it can be avoided. I'm hoping Fastsc92 can post more pics so I can get a better idea of how a regular drill and bit will do it. Just want to get a better preview. If it still appears tricky then I might consider the 12" drill bit. Or just selling this kit. __________________ XD-9 Tactical for IDPA, XD-40 Subcompact for concealed carry, XD-45 Service for home defense. Three calibers, three models, three purposes. No compromises.

03-08-2008, 09:27 AM	#70
Fastsc92 XDTalk Member Join Date: Dec 2007 Location: Salem, NH Posts: 82	Sorry guys, I don't have any other pics at the moment and I wont be able to take anymore until next weekend. __________________ XD-9 Service Sig Mosquito

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.xdtalk.com/forums/hs2000-sa-xd-accessories/61079-powderriver-trigger-mod-video.html
Posted By	For	Type	Date
Powder River Precision	This thread	Refback	11-17-2008 05:44 PM
Powder River Precision	This thread	Refback	11-10-2008 12:19 AM
Powder River Precision XD Striker Safety Lever	This thread	Refback	11-09-2008 11:26 PM
rec.crafts.metalworking \| Google Groups	This thread	Refback	03-06-2008 11:32 AM
Powder River Precision	This thread	Refback	03-06-2008 10:13 AM
Powder River Precision	This thread	Refback	03-06-2008 12:25 AM
Powder River Precision	This thread	Refback	03-06-2008 12:22 AM
Powder River Precision	This thread	Refback	03-05-2008 11:57 PM
OT: Cleveeland cop dies on the line - rec.crafts.metalworking \| Google Groups	This thread	Refback	03-04-2008 03:50 PM
rec.crafts.metalworking \| Google Groups	This thread	Refback	03-04-2008 06:13 AM
OT: Cleveeland cop dies on the line - rec.crafts.metalworking \| Google Groups	This thread	Refback	03-03-2008 08:43 PM
Florida Shooters Network View topic - New drop in trigger kit for the xd.	This thread	Refback	03-03-2008 06:53 PM
Florida Shooters Network View topic - New drop in trigger kit for the xd.	This thread	Refback	03-01-2008 03:34 AM
Untitled document	This thread	Refback	02-26-2008 03:57 PM
Powder River Precision XD Striker Safety Lever	This thread	Refback	02-25-2008 06:38 PM
XDTalk Forums - Your HS2000/SA-XD Information Source!	This thread	Refback	02-25-2008 04:19 PM