Blackhawk CQC cutdown for XDSC - XDTalk Forums - Your HS2000/SA-XD Information Source!

The_Duke · 02-26-2007, 06:21 PM

I wanted a Blackhawk CQC with SERPA for my subby but when I called Blackhawk I found out they don't make one for the sub compact XD. So I bought one for the four inch and cut it down with the bandsaw. Here are a couple of picks if someone thought about doing it for there sub. I can draw alot faster out of this holster than I can out of my leather and fobus holster.

srcasticman · 02-26-2007, 06:30 PM

thanks Duke! This is exactly what i asked for and got no response about a month ago! did the bansay leave it pretty rough? Did it screw with the release button at all? Thanks again.

Mark82ndABN · 02-26-2007, 06:35 PM

Very nice! I have a CQC for my Sig 229 and like it. I had given thought to what you just did for my XD40 SC but was not sure about dropping the $$$ for an "experiment". Thanks for posting...... looks like I'll pick one up and start cutting.

The_Duke · 02-26-2007, 06:49 PM

Bandsaw worked great. You just have to clean the edge up after you cut it, it did not mess with the tension screw or the release. It worked out well.

RootDr · 02-27-2007, 03:29 PM

That's cool Duke!! Don't it kinda piss you off that the sc models don't get much support on the parts and accy front?

The_Duke · 02-27-2007, 06:50 PM

I know, Why can't Blackhawk do what I just did. They would sell.

PeteTschantz · 02-27-2007, 07:00 PM

I have one for my 4" compact .45, and love it. Congrats on making it work for you!

02-26-2007, 06:21 PM	#1
The_Duke XDTalk Member Join Date: Nov 2006 Location: Lewes, DE Posts: 93	Blackhawk CQC cutdown for XDSC I wanted a Blackhawk CQC with SERPA for my subby but when I called Blackhawk I found out they don't make one for the sub compact XD. So I bought one for the four inch and cut it down with the bandsaw. Here are a couple of picks if someone thought about doing it for there sub. I can draw alot faster out of this holster than I can out of my leather and fobus holster.

02-26-2007, 06:30 PM	#2
srcasticman XDTalk Newbie Join Date: Sep 2006 Posts: 15	thanks Duke! This is exactly what i asked for and got no response about a month ago! did the bansay leave it pretty rough? Did it screw with the release button at all? Thanks again. __________________ Phoenix Paintball: www.phoenixpb.com

02-27-2007, 03:29 PM	#5
RootDr XDTalk Member Join Date: Jan 2007 Posts: 82	Nice!! That's cool Duke!! Don't it kinda piss you off that the sc models don't get much support on the parts and accy front? __________________ Keep On Glockin' In The Free World....

02-27-2007, 07:00 PM	#7
PeteTschantz XDTalk 100 Member Join Date: Feb 2007 Location: Clover, SC Posts: 118	I have one for my 4" compact .45, and love it. Congrats on making it work for you! __________________ XD .45 4" Compact Blackhawk SERPA Holster TheWilderness Instructor Belt - 1 3/4"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-26-2007, 06:35 PM	#3
Mark82ndABN XDTalk Member Join Date: Dec 2006 Location: Bangor, PA Posts: 32	Very nice! I have a CQC for my Sig 229 and like it. I had given thought to what you just did for my XD40 SC but was not sure about dropping the $$$ for an "experiment". Thanks for posting...... looks like I'll pick one up and start cutting.

02-26-2007, 06:49 PM	#4
The_Duke XDTalk Member Join Date: Nov 2006 Location: Lewes, DE Posts: 93	Bandsaw worked great. You just have to clean the edge up after you cut it, it did not mess with the tension screw or the release. It worked out well.

02-27-2007, 06:50 PM	#6
The_Duke XDTalk Member Join Date: Nov 2006 Location: Lewes, DE Posts: 93	I know, Why can't Blackhawk do what I just did. They would sell.