Polish slide? How? - XDTalk Forums - Your HS2000/SA-XD Information Source!

gunnery · 06-25-2008, 05:18 AM

On another forum I saw where some people took a matte stainless slide and finished it themselves in a high gloss, mirror-like finish. Does anyone know how I can do that myself to a few of my non-carry guns?

I would appreciate any advice. I would really like to do it myself rather than send it out.

Thanks.

tomfoolery · 06-25-2008, 05:21 AM

A dremel with a polish compound and a buffing wheel....and lots of time. Or you could use a bench grinder with a buffing pad and some compound.

Either way you slice it you need lots of time

Bill in San Jose · 06-25-2008, 10:22 AM

Do a search on "polish" here, there are several really informative threads recently. There is one fellow posting who has done parts for people that look great, and he's posted a polished Glock slide but not an XD. Maybe your's will be #1?

He uses a lot of techniques and experience beyond a dremel and compound to get to a mirror finish.

polished barrel: home job

DanMartin · 06-25-2008, 03:40 PM

My slide was made in Croatia.

shark52 · 06-25-2008, 04:25 PM

Some words of wisdom. If you use power tools, be very careful not to round the corners. It really looks like sh#t if you get carried away. This is speaking from personal experience. Take your time and good luck.

gunnery · 06-25-2008, 04:45 PM

Thanks to all. Great advise and I will hopefully(if I am not too embarassed to show everyone) the result soon.

russ2400 · 06-25-2008, 07:54 PM

I'm sure it will look fine, post some pics when you are done, I just did my slide with sandpaper and wet sanding. It looks pretty good but not chrome as others do, pretty sure they are using polishing compounds and high speed wheels.

Johnnybgood · 06-25-2008, 08:21 PM

call Todd at customized creationz he is a professional and will help you through as much as he can. I believe his web site is customizedcreationz.com or do a search on here for slide polishing he gives some good info on how to

06-25-2008, 05:21 AM	#2
tomfoolery XDTalk 4K Member Join Date: Apr 2007 Location: Cincinnati Posts: 4,409	A dremel with a polish compound and a buffing wheel....and lots of time. Or you could use a bench grinder with a buffing pad and some compound. Either way you slice it you need lots of time __________________ "It is better to die on your feet than live on your knees." "One is none, two is one, and three is just a good time." Clint Smith, referring to the number of guns you carry daily.

06-25-2008, 10:22 AM	#3
Bill in San Jose XDTalk 1K Member Join Date: Jul 2007 Posts: 1,298	Do a search on "polish" here, there are several really informative threads recently. There is one fellow posting who has done parts for people that look great, and he's posted a polished Glock slide but not an XD. Maybe your's will be #1? He uses a lot of techniques and experience beyond a dremel and compound to get to a mirror finish. polished barrel: home job __________________ A strong body makes the mind strong. As to the species of exercises, I advise the gun. While this gives moderate exercise to the body, it gives boldness, enterprise and independence to the mind. Games played with the ball and others of that nature, are too violent for the body and stamp no character on the mind. Let your gun therefore be the constant companion of your walks. - Thomas Jefferson, in a letter to his nephew Last edited by Bill in San Jose : 06-25-2008 at 10:25 AM.

06-25-2008, 03:40 PM	#4
DanMartin XDTalk Member Join Date: Nov 2006 Posts: 83	My slide was made in Croatia. __________________ I am just a vessel for peace, love and happiness.

06-25-2008, 08:21 PM	#8
Johnnybgood XDTalk 500 Member Join Date: Mar 2007 Location: North West Florida Posts: 601	call Todd at customized creationz he is a professional and will help you through as much as he can. I believe his web site is customizedcreationz.com or do a search on here for slide polishing he gives some good info on how to __________________ XD .40 SC Trijicon NS XD .45 Compact TFOS Ruger P345PR Taurus PT 24/7 PRO .40 Cal. Bersa Thunder .380 Savage 12 gage pump

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-25-2008, 05:18 AM	#1
gunnery XDTalk Member Join Date: Aug 2007 Location: Ft. Lauderdale, FL Posts: 33	Polish slide? How? On another forum I saw where some people took a matte stainless slide and finished it themselves in a high gloss, mirror-like finish. Does anyone know how I can do that myself to a few of my non-carry guns? I would appreciate any advice. I would really like to do it myself rather than send it out. Thanks.

06-25-2008, 04:25 PM	#5
shark52 XDTalk Member Join Date: Jun 2008 Location: San Antonio, TX Posts: 70	Some words of wisdom. If you use power tools, be very careful not to round the corners. It really looks like sh#t if you get carried away. This is speaking from personal experience. Take your time and good luck.

06-25-2008, 04:45 PM	#6
gunnery XDTalk Member Join Date: Aug 2007 Location: Ft. Lauderdale, FL Posts: 33	Thanks to all. Great advise and I will hopefully(if I am not too embarassed to show everyone) the result soon.

06-25-2008, 07:54 PM	#7
russ2400 XDTalk Newbie Join Date: Jun 2008 Posts: 1	I'm sure it will look fine, post some pics when you are done, I just did my slide with sandpaper and wet sanding. It looks pretty good but not chrome as others do, pretty sure they are using polishing compounds and high speed wheels.