1st Post! Bought a HS2000, range report included. - XDTalk Forums - Your HS2000/SA-XD Information Source!

raf32 · 07-03-2005, 05:48 PM

I am new to these boards and this is my first post as well as my first HS2000 or XD design pistol. I usually shoot my HK P7M8 or my Glock 19. The P7m8 is my primary CHL carry pistol for 6 years and has performed flawless during that time despite many abusing events. I have taken the P7M8 and the Glock to Thunder Ranch on a few occasions and have never had a malfunction to date despite thousands of rounds. I am hoping to expect the same reliabilty from the HS2000 and would like some opinions from some of you that have shot your HS2000 beyond 5 thousand rounds. Have you had to replace the recoil spring or any other parts?
I took the HS out to the range yesterday with some hi-cap mags and had no malfunctions and very good accuracy from the pistol. I am having to adjust to the lengthy trigger reset, but the pistol fits my hand well and I can hold a very tight grouping with it. I installed a Sig-Sauer front night sight and left the factory rear sight in place, this caused my pistol to shoot about 1 1/2" low at 7yds. I will be picking up a Sig rear sight on Tuesday to correct the problem. Overall, the HS2000 exceeded my expectations and I plan on carrying it for a while and let the P7M8 have a break. I plan on buying a Fobus paddle holster, any objections. I look forward to contributing to the discussion group.
I noticed that the finish on the HS2000 says IM metal, is this a different finish from the Springfield version of the pistol? Can I expect the finish to hold up under adverse conditions like my Glock?

Son of Norway · 07-03-2005, 11:21 PM

Welcome.

I think IM metal is a reference to the factory, not the finish. If I am wrong I am sure someone will correct that in short order.

The XD finish is not as durable as Glock's, but that doesn't mean that it is ****ty. With some proper maintenance and a coat of Armadillo wax it will hold up just fine.

mulder · 07-03-2005, 11:25 PM

Yep IM metal is the company that makes them. I think it is actually called IM Produkt but dont quote me.
mulder
PS You will love your HS2000! I love mine.

**Frenchy** · 07-04-2005, 06:50 AM

I have well over 10,000 rounds through my Gen.1 with no parts replacement or malfs.

raf32 · 07-04-2005, 07:11 AM

The HS2000 that I bought has 3k rounds through it according to the previous owner and the finish is holding up pretty good considering that he carried it in a holster on a regular basis.
I really like the ambi mag release because I use the middle finger to release the mag so that my grip on the pistol does not change to speed the reload and stay on target like the HK pistols that I shoot.
Russ

**loonybin** · 07-06-2005, 09:10 AM

oddly enough, your HS2000 has a better finish than the XD, even though they are the same gun. Complaints about the finish were almost nonexistent when the pistol was just the HS2000. Once Springfield started to import them, the finish seemed to go downhill. I don't know if the factory changed something or what, but the HS2K has a better finish. My gen. 1 had a good durable finish, but I put NP3 on it anyway.

kabob983 · 07-06-2005, 10:47 AM

I fired ajamesp51's old HS2000 with over 60,000 (yes, 60,000) rounds through it last week and it fired flawlessly. The gun still looks brand new as well. He said the only part he's had to replace (I believe) was the spring that hold the grip safety out. Not positive that's the piece. The moral of the story though is that yes, they can take quite a bit of punishment if you take care of them. The finish is going to be inferior to the Tenifer finish, but that shouldn't mean much if you take care of the pistol.

ajamesp51 · 07-06-2005, 04:11 PM

Welcome to the HS part of this website, yep my gen 1 has lots and lots of rounds and still works just fine.

raf32 · 07-06-2005, 08:55 PM

Here are a few of my pistols, yes the Suppressers are Form 4 approved and legal in Texas. The hard chromed P7M8 has been my primary CHL carry pistol for 6 long years and has seen serious holster and firing time but continues to perform flawless.
I think I agree that the finish on the HS2000 pistols is better than the Springfield finish, mine is holding up just fine. I am happy to hear from some of you who have really shot the crap out of the HS2000 without problems. Has anyone here had to replace a recoil spring, mine feels like it is a little weak.

S&S firearms · 07-16-2005, 04:35 PM

Hi, Welcome to the group. I also have a hs 2000. And I am very happy with the performance of it. Shoots good groups and the finish is in good shape.

07-03-2005, 05:48 PM	#1
raf32 XDTalk Newbie Join Date: Jul 2005 Location: Lone Star State Posts: 12	1st Post! Bought a HS2000, range report included. I am new to these boards and this is my first post as well as my first HS2000 or XD design pistol. I usually shoot my HK P7M8 or my Glock 19. The P7m8 is my primary CHL carry pistol for 6 years and has performed flawless during that time despite many abusing events. I have taken the P7M8 and the Glock to Thunder Ranch on a few occasions and have never had a malfunction to date despite thousands of rounds. I am hoping to expect the same reliabilty from the HS2000 and would like some opinions from some of you that have shot your HS2000 beyond 5 thousand rounds. Have you had to replace the recoil spring or any other parts? I took the HS out to the range yesterday with some hi-cap mags and had no malfunctions and very good accuracy from the pistol. I am having to adjust to the lengthy trigger reset, but the pistol fits my hand well and I can hold a very tight grouping with it. I installed a Sig-Sauer front night sight and left the factory rear sight in place, this caused my pistol to shoot about 1 1/2" low at 7yds. I will be picking up a Sig rear sight on Tuesday to correct the problem. Overall, the HS2000 exceeded my expectations and I plan on carrying it for a while and let the P7M8 have a break. I plan on buying a Fobus paddle holster, any objections. I look forward to contributing to the discussion group. I noticed that the finish on the HS2000 says IM metal, is this a different finish from the Springfield version of the pistol? Can I expect the finish to hold up under adverse conditions like my Glock?

07-03-2005, 11:25 PM	#3
mulder XDTalk 100 Member Join Date: Jan 2005 Location: Land Down Under Posts: 327	Yep IM metal is the company that makes them. I think it is actually called IM Produkt but dont quote me. mulder PS You will love your HS2000! I love mine. __________________ My head is like a padded cell...with ears!

07-04-2005, 06:50 AM	#4
Frenchy XDTalk 10K Member Join Date: Mar 2001 Location: Mid-Missouri Posts: 13,168	I have well over 10,000 rounds through my Gen.1 with no parts replacement or malfs. __________________ ~SC Harvey~ 2008 Election..."Embrace your ignorance, and vote your preference". It's quite simple, really... *If you vote for Obama, you are a fuking idiot. If you vote for McCain, you are a fuking idiot.* *If your vote is for the lessor of two evils, then you can be comforted knowing that you're less of a fuking idiot than the other guy! Because Fritz says so! RON PAUL IN 2008**

07-06-2005, 09:10 AM	#6
loonybin XDTalk 1K Member Join Date: Mar 2001 Location: central Kansas Posts: 1,524	oddly enough, your HS2000 has a better finish than the XD, even though they are the same gun. Complaints about the finish were almost nonexistent when the pistol was just the HS2000. Once Springfield started to import them, the finish seemed to go downhill. I don't know if the factory changed something or what, but the HS2K has a better finish. My gen. 1 had a good durable finish, but I put NP3 on it anyway. __________________ Tempus fugit. Frater, memento mori. Happy is what you make it -- always has been, always will be.

07-06-2005, 04:11 PM	#8
ajamesp51 XDTalk 5K Member Join Date: Jan 2003 Location: Birmingham, Al Posts: 5,027	Welcome to the HS part of this website, yep my gen 1 has lots and lots of rounds and still works just fine. __________________ "God shall not have his word made manifest by cowards" RWE www.xd-hs2000.com

07-04-2005, 07:11 AM	#5
raf32 XDTalk Newbie Join Date: Jul 2005 Location: Lone Star State Posts: 12	The HS2000 that I bought has 3k rounds through it according to the previous owner and the finish is holding up pretty good considering that he carried it in a holster on a regular basis. I really like the ambi mag release because I use the middle finger to release the mag so that my grip on the pistol does not change to speed the reload and stay on target like the HK pistols that I shoot. Russ

07-06-2005, 10:47 AM	#7
kabob983 XDTalk 100 Member Join Date: Jun 2005 Location: Birmingham, AL Posts: 196	I fired ajamesp51's old HS2000 with over 60,000 (yes, 60,000) rounds through it last week and it fired flawlessly. The gun still looks brand new as well. He said the only part he's had to replace (I believe) was the spring that hold the grip safety out. Not positive that's the piece. The moral of the story though is that yes, they can take quite a bit of punishment if you take care of them. The finish is going to be inferior to the Tenifer finish, but that shouldn't mean much if you take care of the pistol.

07-06-2005, 08:55 PM	#9
raf32 XDTalk Newbie Join Date: Jul 2005 Location: Lone Star State Posts: 12	Here are a few of my pistols, yes the Suppressers are Form 4 approved and legal in Texas. The hard chromed P7M8 has been my primary CHL carry pistol for 6 long years and has seen serious holster and firing time but continues to perform flawless. I think I agree that the finish on the HS2000 pistols is better than the Springfield finish, mine is holding up just fine. I am happy to hear from some of you who have really shot the crap out of the HS2000 without problems. Has anyone here had to replace a recoil spring, mine feels like it is a little weak.

07-16-2005, 04:35 PM	#10
S&S firearms XDTalk Member Join Date: May 2005 Location: Wisconsin Posts: 33	Hi, Welcome to the group. I also have a hs 2000. And I am very happy with the performance of it. Shoots good groups and the finish is in good shape. __________________ HS 2000 Gen. 1 S&W model 29 SKS 7.62 B.A.R. 30-06 beretta a56e 12 ga. http://pg.photos.yahoo.com/ph/r.schn...b4.jpg&.src=ph

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode