Cleaning the XD - Page 2 - XDTalk Forums - Your HS2000/SA-XD Information Source!

Tally XD · 02-25-2008, 06:32 PM

ATF might be too harsh to use on a polymer gun chassis.

I use Gun Scrubber for Synthetics as a spray cleaner on any polymer areas of the reciever. I use Hoppes #9 on a boresnake for bore cleaning and breech scrubbing. I then clean it off good and spray the Hoppes residue off of the slide and barrel with CRC Brake Cleaner (green can only!). I then lightly oil the rails and small reciever parts with Marvel Mystery Oil on a Q-tip. I also run a patch, lightly coated with Marvel Mystery Oil, through the bore followed by a dry patch to catch any excess. Finish with a reassembly and a final wipe with a dry clean lint free cloth.

I do this about every 500 rounds, or when I am just bored or needing to fondle the XD.

Tricky · 02-25-2008, 10:11 PM

Has anyone come across any of the Break Free products that discolors the polymer frame of the XD?

DeltaCharlie2 · 02-26-2008, 07:45 AM

Quote:

Originally Posted by Tricky

Has anyone come across any of the Break Free products that discolors the polymer frame of the XD?

My breakfree CLP has never left discoloration on my frame. I've used it on two xd's and a polymer-framed Taurus pistol.

It has also dripped onto the plastic handle and wood grips of my AK without leaving any marks.

eschmidt86 · 02-26-2008, 02:21 PM

Thanks to all you guys for the advice. I think I'm going to try the CLP Breakfree, I have heard nothing but good about that stuff, not that the Gunscubber isn't working for me, it works fine, but hey can't hurt to try something new right? Thanks again.

Tactical03 · 02-27-2008, 07:58 AM

Just wanted to see what yall are using for holsters for the XD 45 acp. I know this is off the topic of cleaning. I am new to the site and am waiting on my handgun permit from the sheriffs dept here in Rutherforton NC. I am also purchasing a light for it and getting the guide rod laser for mine. what are there for holsters for this handgun. Any info would be great. Thanks in advance for the input.
Joseph

myxd45 · 02-27-2008, 09:29 AM

gun scrubber & hpoes 9 copper foul remover

pleasantguywhopacksAXD · 02-27-2008, 02:38 PM

Now I may get lambasted for it.
I use WD-40 for the slide and Shooters choice for the bore, the frame I use a tooth brush and Shooters then use compressed air to remove excess cleaners and WD residue.

pleasantguywhopacksAXD · 02-27-2008, 02:54 PM

Quote:

Originally Posted by Tactical03

Just wanted to see what yall are using for holsters for the XD 45 acp. I know this is off the topic of cleaning. I am new to the site and am waiting on my handgun permit from the sheriffs dept here in Rutherforton NC. I am also purchasing a light for it and getting the guide rod laser for mine. what are there for holsters for this handgun. Any info would be great. Thanks in advance for the input.
Joseph

Like this?

I don't attach the M3X while carrying. It gets put in the pocket of my carry vest or coat or shirt. I use a MTAC holster for the .45 service.

GreenBayShooter · 02-27-2008, 03:37 PM

Quote:

Originally Posted by XD 9 Loaded Sub-Compact

Just don't put it in the dish washer.

I use the gun scrubber (syn safe) it works well, but so does the CLP. I typically use the gun scrubber with brush for those stubborn areas and CLP for everything else.

Actually, not a bad idea - I doubt if the dishwasher would hurt it, and if you disassemble it, the spray would definately clean out the gunk in the crevices. Just oil it properly afterward...

I don't think there are many cleaners out there that will harm the finish or the polymer on your XD...

Myk9noseknows · 02-27-2008, 05:32 PM

Just make sure that you do not clean it from the muzzle end of the barrel!!

Most people don't tell you that when cleaning, but always insert your cleaning rod, jags, brushes, etc...from the chamber end (where the cartridge is seated).

It's possible to do damage to the crown of your barrel (muzzle end where the bullet comes out to kill you), when cleaning from that end. It's just a possibility, but it can happen and i imagine most people would like to avoid that.

02-25-2008, 06:32 PM	#11
Tally XD XDTalk 1K Member Join Date: Apr 2007 Location: North Florida Posts: 1,210	ATF might be too harsh to use on a polymer gun chassis. I use Gun Scrubber for Synthetics as a spray cleaner on any polymer areas of the reciever. I use Hoppes #9 on a boresnake for bore cleaning and breech scrubbing. I then clean it off good and spray the Hoppes residue off of the slide and barrel with CRC Brake Cleaner (green can only!). I then lightly oil the rails and small reciever parts with Marvel Mystery Oil on a Q-tip. I also run a patch, lightly coated with Marvel Mystery Oil, through the bore followed by a dry patch to catch any excess. Finish with a reassembly and a final wipe with a dry clean lint free cloth. I do this about every 500 rounds, or when I am just bored or needing to fondle the XD. __________________ You have a right to self defense! Vote *AGAINST* Obama!! ----------------------------------------- 2007 XD.45ACP Service (black) Mega "Gator" AR-15 5.56mm Remington 870 Tactical

02-27-2008, 07:58 AM	#15
Tactical03 XDTalk Member Join Date: Feb 2008 Location: Forest City, NC Posts: 67	Holstering With M3x And Other Mounted Lights Just wanted to see what yall are using for holsters for the XD 45 acp. I know this is off the topic of cleaning. I am new to the site and am waiting on my handgun permit from the sheriffs dept here in Rutherforton NC. I am also purchasing a light for it and getting the guide rod laser for mine. what are there for holsters for this handgun. Any info would be great. Thanks in advance for the input. Joseph

02-27-2008, 09:29 AM	#16
myxd45 XDTalk Member Join Date: Jan 2008 Location: rohnert park Posts: 50	gun scrubber & hpoes 9 copper foul remover __________________ SAXD 5"tactical-45.acp win 70(post64)-30.-06 win 94(post64)-30/30 marlin 336A-30/30 marlin 60-22.LR schmidt rubin k31-7.5x55 mossberg 185d-20GA mossberg 500-12GA ruger mini14-223./5.56NATO marlin 925-22magnum

02-27-2008, 02:38 PM	#17
pleasantguywhopacksAXD XDTalk 100 Member Join Date: Feb 2008 Location: Blanchester, Ohio Posts: 300	Now I may get lambasted for it. I use WD-40 for the slide and Shooters choice for the bore, the frame I use a tooth brush and Shooters then use compressed air to remove excess cleaners and WD residue. __________________ Member OFCC, Life Member NRA ʞɔns sʞɔolƃ WARNING: The FDA requires all those using glocks that side effects may include: A rose colored appearance of your surroundings. Voices telling them they are invincible. A uncontrolable urge to smash, poke, prod, wet,salt, bury and drop from low flying aircraft said glock, then need to brag uncontrollably.

02-27-2008, 05:32 PM	#20
Myk9noseknows XDTalk 1K Member Join Date: Dec 2006 Posts: 1,791	Just make sure that you do not clean it from the muzzle end of the barrel!! Most people don't tell you that when cleaning, but always insert your cleaning rod, jags, brushes, etc...from the chamber end (where the cartridge is seated). It's possible to do damage to the crown of your barrel (muzzle end where the bullet comes out to kill you), when cleaning from that end. It's just a possibility, but it can happen and i imagine most people would like to avoid that. __________________ "When people need help, they call the Police. When Police need help, they call K-9"

02-25-2008, 10:11 PM	#12
Tricky XDTalk 100 Member Join Date: Feb 2008 Location: Statesboro GA Posts: 142	Has anyone come across any of the Break Free products that discolors the polymer frame of the XD?

02-26-2008, 02:21 PM	#14
eschmidt86 XDTalk Newbie Join Date: Feb 2008 Location: Northern California Posts: 5	Thanks to all you guys for the advice. I think I'm going to try the CLP Breakfree, I have heard nothing but good about that stuff, not that the Gunscubber isn't working for me, it works fine, but hey can't hurt to try something new right? Thanks again.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode