Range Report with my XD357 - XDTalk Forums - Your HS2000/SA-XD Information Source!

Tang419 · 04-20-2005, 05:23 PM

Went out to try some more Federal 125gr JHP's. Backed up 7 yards, and I did 5 shots at a piece of paper with a loose grip like I had been shooting it, after the 5th shot it failed to lock in battery, my shots were scattered somewhat. So I took that bullet out and put it back in the mag. Then I fired 7 shots at a piece of aluminum trim coil with a firm, tight grip, with my thumb in the thumb groove (I usually dont do this). I myself am still in shock, not only did the gun function flawlessly, even with the round it chocked on earlier, but I have two ovaled out holes for 7 rounds. I know there will always be doubters and non-believers, but I took a pic of the target. http://www.geocities.com/pwrbyford5_0/XD357target.JPG

It appears like there was probably 3 shots in each hole, but the target was hanging on a 4x8 sheet of plywood and no others holes were around it.

I LOVE this gun

Tang419 · 04-20-2005, 07:47 PM

Sorry, just realized I posted this is the wrong forum.

04-20-2005, 05:23 PM	#1
Tang419 XDTalk Member Join Date: Apr 2005 Location: SW Virginia Posts: 36	Range Report with my XD357 Went out to try some more Federal 125gr JHP's. Backed up 7 yards, and I did 5 shots at a piece of paper with a loose grip like I had been shooting it, after the 5th shot it failed to lock in battery, my shots were scattered somewhat. So I took that bullet out and put it back in the mag. Then I fired 7 shots at a piece of aluminum trim coil with a firm, tight grip, with my thumb in the thumb groove (I usually dont do this). I myself am still in shock, not only did the gun function flawlessly, even with the round it chocked on earlier, but I have two ovaled out holes for 7 rounds. I know there will always be doubters and non-believers, but I took a pic of the target. http://www.geocities.com/pwrbyford5_0/XD357target.JPG It appears like there was probably 3 shots in each hole, but the target was hanging on a 4x8 sheet of plywood and no others holes were around it. I LOVE this gun __________________ XD357 Service Model Ruger KP93D My Friend\'s Gun Shop

04-20-2005, 07:47 PM	#2
Tang419 XDTalk Member Join Date: Apr 2005 Location: SW Virginia Posts: 36	Sorry, just realized I posted this is the wrong forum. __________________ XD357 Service Model Ruger KP93D My Friend\'s Gun Shop

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode