S.A. custom shop prices?? - XDTalk Forums - Your HS2000/SA-XD Information Source!

wJAKE19 · 03-10-2005, 10:04 PM

how much does it cost to get a trigger job done at the SA custom shop, pretravel, overtravel, reset, and 4# pull.?

I looked on their web site and can not find the prices, if anyone here has had it done i would like to know the price and turnaround time.

if any one else knows any other GOOD shops that know the XD I would consider them as well.
I have already talked to canyon creek and I am leaning towards going with them. Rich sounds like a good guy to work with.

thanks for any help

I_Route · 03-11-2005, 04:12 AM

Here you go!

http://springfield-armory.com/CS.pdf

On edit:

Thanks NEXD! Don't know what I was thinkin' when I did that.

NExd · 03-11-2005, 05:31 AM

http://springfield-armory.com/CS.pdf

(so you can actually click on it)

wJAKE19 · 03-11-2005, 07:28 AM

I have gone to that link, for some reason my computer will not open it.

my computer is getting old so it will not read some files.

blindpig · 03-11-2005, 07:50 AM

I sent my XD9 Service Model to Springfield for a competition action job and had it back in my hand in exactly 3 weeks. The cost was $200 plus the charge for me to ship it to them. The change in the trigger pull, overtravel and reset is dramatic. I recommend it to anyone who wants to shoot tighter groups with their XD.

Krackels · 03-11-2005, 07:52 AM

Quote:

XD Carry Pro Package: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$215.00
Combat action job (4-4.5 lb. pull); reduced overtravel; Springfield Custom fiber optic sights (red front, green rear); install extended mag release; inspect entire pistol; test fire. (Optional finishes and tritium night sights available at additional cost.)

XD Tactical Pro Package: . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$525.
Competition action job (3-3.5 lb. pull); reduced overtravel and reset on trigger; Dawon adjustable fiber optic ront & rear sights; extended mag release; refit factory barrel for match grade accuracy; Armory Kote finish all metal parts. Inspect entire pistol; test fire. (Tritium night sights optional.)

XD Custom Pro Package: . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$750.
Install custom match barrel; install Bomar low mount rear sight with matching competition fiber optic front sight (Tritium front night sight can be substituted at additional charge); competition action job (3-3.5 lb. pull); reduced overtravel and reset on trigger; Armory Kote finish all metal parts. Inspect entire pistol; test fire.

Trigger Work:
Combat action job (4-4.5 lb. pull. Reduction of trigger pull only. ) . . . . . . .. .$ 95.00
Competition action job (Reduced overtravel and reset.) . . . . . . . . . . . . . . .$175.00
Overtravel adjustment added to trigger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35.00
Smooth surface on face of trigger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..$25.00
Increase trigger pull to 10-12 # . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..$50.00

I don't see reduced pretravel on the custom work sheet. You may have to email Springfield and ask them.

Krackels

wJAKE19 · 03-11-2005, 08:03 AM

thanks alot, this darn old computer anyway. I guess its time for a new one.

Meta4 · 03-11-2005, 08:22 AM

I'd like to get a Hard Chrome finish on my XD, but I noticed in that price sheet that a "Nickle Teflon finish" was available for $175.00. I've never heard of such a beast before.

Does anyone have any experience with it? Does it stack up well with the Hard Chrome finish? Other thoughts?

-James

Fingolfin · 03-11-2005, 09:04 AM

Quote:

Originally Posted by Meta4

I'd like to get a Hard Chrome finish on my XD, but I noticed in that price sheet that a "Nickle Teflon finish" was available for $175.00. I've never heard of such a beast before.

Does anyone have any experience with it? Does it stack up well with the Hard Chrome finish? Other thoughts?

-James

I think that may actually be Robar's NP3 plating. If so it's probably not as hard as hard chrome, but a lot more lubricious.

lubricious, i love that word.

**VaGunNut** · 08-30-2006, 01:07 PM

Here is the link to SA's Custom Shop Work Order Info http://www.springfield-armory.com/XD.pdf

03-10-2005, 10:04 PM	#1
wJAKE19 XDTalk 500 Member Join Date: Feb 2005 Location: Belding, Michigan Posts: 520	S.A. custom shop prices?? how much does it cost to get a trigger job done at the SA custom shop, pretravel, overtravel, reset, and 4# pull.? I looked on their web site and can not find the prices, if anyone here has had it done i would like to know the price and turnaround time. if any one else knows any other GOOD shops that know the XD I would consider them as well. I have already talked to canyon creek and I am leaning towards going with them. Rich sounds like a good guy to work with. thanks for any help __________________ ~JAKE

03-11-2005, 04:12 AM	#2
I_Route XDTalk 500 Member Join Date: Feb 2005 Location: Merrimack, NH Posts: 855	Here you go! http://springfield-armory.com/CS.pdf On edit: Thanks NEXD! Don't know what I was thinkin' when I did that. __________________ Later, Jeff If you can read this, thank a teacher. If it is in English, thank a soldier.

03-11-2005, 07:28 AM	#4
wJAKE19 XDTalk 500 Member Join Date: Feb 2005 Location: Belding, Michigan Posts: 520	I have gone to that link, for some reason my computer will not open it. my computer is getting old so it will not read some files. __________________ ~JAKE

03-11-2005, 07:50 AM	#5
blindpig XDTalk Member Join Date: Jan 2005 Location: Tulsa, OK Posts: 81	I sent my XD9 Service Model to Springfield for a competition action job and had it back in my hand in exactly 3 weeks. The cost was $200 plus the charge for me to ship it to them. The change in the trigger pull, overtravel and reset is dramatic. I recommend it to anyone who wants to shoot tighter groups with their XD. __________________ \"War is the only place where a man truly lives.\" George Patton XD9 Service Model w/Trijicons XD40 Service Model XD9 SC XD9 Tactical Kimber Pro Carry II .45 S&W MP15A SBR CZ452 American Ruger Mini-14 Ranch Rifle

03-11-2005, 08:03 AM	#7
wJAKE19 XDTalk 500 Member Join Date: Feb 2005 Location: Belding, Michigan Posts: 520	thanks alot, this darn old computer anyway. I guess its time for a new one. __________________ ~JAKE

03-11-2005, 05:31 AM	#3
NExd XDTalk 1K Member Join Date: Apr 2004 Location: Land of pretentious, viperous, rancorous little, little men Posts: 1,553	http://springfield-armory.com/CS.pdf (so you can actually click on it)

03-11-2005, 08:22 AM	#8
Meta4 XDTalk 500 Member Join Date: Mar 2005 Location: Southern Michigan Posts: 555	Nickle Teflon I'd like to get a Hard Chrome finish on my XD, but I noticed in that price sheet that a "Nickle Teflon finish" was available for $175.00. I've never heard of such a beast before. Does anyone have any experience with it? Does it stack up well with the Hard Chrome finish? Other thoughts? -James

08-30-2006, 01:07 PM	#10
VaGunNut XDTalk 500 Member Join Date: Aug 2006 Location: Yorktown, Virginia Posts: 503	SA Custom Work Order for the XD Here is the link to SA's Custom Shop Work Order Info http://www.springfield-armory.com/XD.pdf __________________ Osama - Obama - The agenda of either would destroy America! If your shooting from the hip, beware the other guy hasn't already taken aim at you!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode