Strange marks on casings from My XD 40sc - Page 3 - XDTalk Forums - Your HS2000/SA-XD Information Source!

propellerhead · 03-09-2008, 09:24 AM

No.

apierce918 · 03-09-2008, 11:25 AM

mine has some, but not quite that severe

**digitalexplr** · 03-09-2008, 02:26 PM

Very slight on my 9sc, random and hard to see on the .45 service.

Tripledigitride · 03-09-2008, 02:38 PM

My XD40 does the same thing, although, it's not nearly that noticeable. I had to look very closely.

bitone40 · 03-09-2008, 02:46 PM

[

[/quote]
what case is that . the range were i get my cases from have some of those in there . they all check out ok and i havent seen any bad ones yet so i just reload them . .

And for the primer thingy, my 40 service does the same thing and puts a small dent in the case as well . When I deprime and size the case for reload . the dimple goes away , havent had any problems yet .

bd

Kaboom · 03-09-2008, 05:07 PM

Leave it be, anything with the Sig action is going to do that to some extent. Somebody here with a ridiculously high round count will tell you their gun has done it from day one. I have thousands of rounds through my XD-9 and it has always done that, my striker pin is just fine. ALL my semi-auto centerfires do that, if they don't I would expect light primer strikes to start showing up.

AggieChemDoc · 03-10-2008, 07:20 AM

My XD 40 SC does the same thing. The firing pin drag doesn't bother me that much. I'm wondering if the marks on the casings will cause any problems reloading, though.

OKMatt · 03-10-2008, 02:39 PM

My XD .45 Service does it. Test round from SA has it also.

Jack the Toad · 03-10-2008, 07:53 PM

My XD9 has a bit of primer wipe. It has since day one. I have only had it a couple months. I have put several hundred rounds through it though. It is not nearly as deep as the original photo in this thread has in it . I had a Browning HP that did it a little too. A new firing pin return spring and recoil spring completely cured it. Can't say the same for my old EAA Witness. I thing alot of semi autos do it to one extent or another. I would be a little concerned if it were as deep as the original photo appears to be.

mp3mogul · 07-01-2008, 04:52 PM

Definately no worry...

Each of my XD's do it, and my Taurus does it as well. It's mostly related to Striker fired handguns, no problem, it will not harm your gun, NOR the firing pin at all...

03-09-2008, 09:24 AM	#21
propellerhead XDTalk 3K Member Join Date: Apr 2006 Location: Foat Wurth, TX Posts: 3,517	No. __________________ XD-9 Tactical for IDPA, XD-40 Subcompact for concealed carry, XD-45 Service for home defense. Three calibers, three models, three purposes. No compromises.

03-09-2008, 02:26 PM	#23
digitalexplr XDTalk 500 Member Join Date: Oct 2007 Location: Jefferson City, MO Posts: 579	Very slight on my 9sc, random and hard to see on the .45 service. __________________ XD9sc "change is not a destination just as hope is not a strategy" - Sarah Palin

03-09-2008, 05:07 PM	#26
Kaboom XDTalk 2K Member Join Date: Jan 2006 Location: Mid-Coast USA Posts: 2,317	Leave it be, anything with the Sig action is going to do that to some extent. Somebody here with a ridiculously high round count will tell you their gun has done it from day one. I have thousands of rounds through my XD-9 and it has always done that, my striker pin is just fine. ALL my semi-auto centerfires do that, if they don't I would expect light primer strikes to start showing up. __________________ The disinformation here has officially made me NOT give up.

03-10-2008, 02:39 PM	#28
OKMatt XDTalk 100 Member Join Date: Feb 2008 Location: OK,USA Posts: 213	My XD .45 Service does it. Test round from SA has it also. __________________ The sound of tireless voices is the price we pay for the right to hear the music of our own opinions. ~Adlai Stevenson "Get the government out of special interest."

07-01-2008, 04:52 PM	#30
mp3mogul XDTalk 100 Member Join Date: Jun 2008 Location: Salem, Virginia Posts: 429	Definately no worry... Each of my XD's do it, and my Taurus does it as well. It's mostly related to Striker fired handguns, no problem, it will not harm your gun, NOR the firing pin at all... __________________ Springfield 1911 Champion Stainless XD40 Sub-Compact XD9 Sub-Compact XD9 Service Ruger P345 Stainless Ruger 22/45 Mark III Ruger 10/22 Limited Edition Browning Baby 6.35mm Marlin 336w 30-30 ------------------------------------------ Life, Liberty & The Pursuit Of Those Against It

03-09-2008, 11:25 AM	#22
apierce918 XDTalk 100 Member Join Date: Jan 2008 Location: Mid Michigan Posts: 238	mine has some, but not quite that severe

03-09-2008, 02:38 PM	#24
Tripledigitride XDTalk 500 Member Join Date: Mar 2008 Location: Hendersonville (Nashville) Tennessee Posts: 721	My XD40 does the same thing, although, it's not nearly that noticeable. I had to look very closely.

03-09-2008, 02:46 PM	#25
bitone40 XDTalk Member Join Date: Jan 2008 Location: houston Posts: 69	[ [/quote] what case is that . the range were i get my cases from have some of those in there . they all check out ok and i havent seen any bad ones yet so i just reload them . . And for the primer thingy, my 40 service does the same thing and puts a small dent in the case as well . When I deprime and size the case for reload . the dimple goes away , havent had any problems yet . bd

03-10-2008, 07:20 AM	#27
AggieChemDoc XDTalk 100 Member Join Date: Feb 2008 Location: WV Posts: 119	My XD 40 SC does the same thing. The firing pin drag doesn't bother me that much. I'm wondering if the marks on the casings will cause any problems reloading, though.

03-10-2008, 07:53 PM	#29
Jack the Toad XDTalk 100 Member Join Date: Feb 2008 Location: Southern Illinois Posts: 102	My XD9 has a bit of primer wipe. It has since day one. I have only had it a couple months. I have put several hundred rounds through it though. It is not nearly as deep as the original photo in this thread has in it . I had a Browning HP that did it a little too. A new firing pin return spring and recoil spring completely cured it. Can't say the same for my old EAA Witness. I thing alot of semi autos do it to one extent or another. I would be a little concerned if it were as deep as the original photo appears to be.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode