|
|
|
|||||||
| Register | Forum Rules | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| XDTalk Memberships | Gold Sponsorships | XDTalk Sponsors | XDTalk Pro Logo Shop | Photo Gallery | Wiki | ChatBox |
|
Welcome to the XDTalk Forums - Your HS2000/SA-XD Information Source! forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Also, registering gets you started on gaining access to The Trading Post and Blogs after 30 days and 100 posts! Registration is fast, simple and absolutely free so please, join our community today! |
 |
|
|
LinkBack | Thread Tools | Display Modes |
02-22-2005, 02:43 PM
|
#1 |
|
XDTalk Newbie
Join Date: Jan 2005
Location: Northeast
Posts: 3
|
XD40 Newbie problems
Hello everyone,
I went to the range yesterday and ran into some issues...my slide did not lock in the open position after going through a magazine. The 1st two worked great but on the 3rd no dice (The problem was intermittent for the rest of my stay). After putting about 200 rounds into my target every other round would jam-I tired 4 different types of ammo and all had the same problem. I disassembled the gun but did not find anything wrong. Any Ideas? Thanks Bill |
|
    
|
|
02-22-2005, 03:52 PM
|
#2 |
|
XDTalk 100 Member
Join Date: Nov 2004
Location: Columbus, Ohio
Posts: 356
|
Is the feed ramp rough? Where is the round catching? On the edge of the feed ramp or in the chamber? If its a matter of rough spots or burrs you might just want to contact SA about it, they seem to be very quick to help with these kinds of issues.
Matthew
__________________
SA XD40 (my favorite) Don\'s Guide Rod Wolff Spring Ruger P95DC (the wife\'s favorite) Taurus CIA 650 .357 (light carry) Kel-Tec P3-AT (my new lighter carry) Raven M-25 (for when a little something is better than nothing) |
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
