Sig Sights for XD?

[jalley]

Does anyone know what size sights for sig, will fit the xd. I'm thinking it's an #8 rear and a #6 front.

Can anybody confirm this, or tell me what the correct heights are?

Thanks

[ajamesp51]

If you want to replicate a "G" rear on the XD then its a #8 front #8 rear.

If you look at your rear sight on your xd it will be marked if you have a "G" then get the 8/8.

[tec]

Since Sig sights fit the XD, I think this information may be of use to us:

http://www.praxagora.com/lunde/SigProFAQ/VI/2.html

I'll include some of the info from that website here in case praxagora ever goes down.

Rear Sight Heights:

#4 = 5.24mm (0.21 inches)
#5 = 5.52mm (0.22 inches)
#6 = 5.80mm (0.23 inches)
#7 = 6.07mm (0.24 inches)
#8 = 6.35mm (0.25 inches)
#9 = 6.62mm (0.26 inches)
#10 = 6.90mm (0.27 inches)

Front Sight Heights:

#5 = 6.01mm (0.235 inches)
#6 = 5.88mm (0.230 inches)
#7 = 5.74mm (0.225 inches)
#8 = 5.60mm (0.220 inches)
#9 = 5.46mm (0.215 inches)
#10 = 5.32mm (0.210 inches)


A higher rear sight number (taller) will raise the point of impact, but a smaller front sight number (taller) will lower the point of impact.

[jalley]

Thanks guys.