XDTalk Forums - Your XD/XD(m) Information Source! - HS2000 & SA-XD Accessories

Pistol belt?

MagicMan — Fri, 20 Nov 2009 18:32:56 GMT

What belts do you prefer to wear when carrying?

Installing Night sights

Reyort — Fri, 20 Nov 2009 16:05:48 GMT

How difficult is it on an XD SC? What is the process of doing such thing? Would I be better off sending it in to the Custom Shop for their carry package?

Thanks

What mag pouch for concealed carry?

MagicMan — Fri, 20 Nov 2009 06:11:14 GMT

Curious to hear what mag pouches you concealed carry guys are using to carry an extra mag.

I'm looking for something inexpensive that is not going to be uncomfortable. FYI, this is not for an XD mag.

Let's Discuss Green Laser Sights

dave_in_delaware — Thu, 19 Nov 2009 16:56:05 GMT

Not to put down all those cool red lasers, but I believe green is the way to go. That said, let's discuss what's out there and available to all of us XD-loving people. Here's what I've found out so far, for the XD in green wavelengths, from a little online research last night:

AimShot
Welcome to AimSHOT INC. Offictial Site
5mW, 532nm,
$150 via Midway

Beamshot
BEAMSHOT� Laser Sight,Green Laser Sight,Flashlight,Tactical Light,IR Laser Sight,Laser Aim,Laser Aiming Device,Laser Sighting System
<5mW, 532nm, class IIIa
$300

LaserMax
LaserMax: Laser Sight, Green Laser Sight, Infrared Laser Sight, IR Laser Sight
5mW, 532nm
Spot Size: 5/16" @ 7 Yds; 3/4" @ 25 Yds
$399

Viridian Green Laser Sights
Viridian Green Laser Sights - Fits Glock, Springfield XD, Walther, Sig
5mW peak, 532nm, Class IIIa, Continuous Wave
Beam divergence: 1.2 mrad
Spot size: approx. 0.5" diameter at 50 feet
Range: 2 miles
$299

All of these attach to the accessory rail in front of the trigger guard. I think most if not all use the CR123 lithium batteries, or something similar.

Did I miss a company out there that also manufactures green lasers? Are they all separate devices that mount on the accessory rail, or does someone make an internal guide rod version?

I'd appreciate any input you may have on any product, and a review if you actually own one of these (or something different). Thanks.

Need help deciding on a new holster.

mohh — Wed, 18 Nov 2009 03:25:29 GMT

Hi guys,

Like most conceal carriers, I'm slowly building up a collection of holsters that just don't cut it. I'm in the process of trying a third one, but can't decide between the following and was hoping to get some input from anyone with first hand experience with any of these:

SuperTuck Deluxe - Only drawback that I see, which is not a fault of the holster, is that not all of my pants are really loose, I've gained a few pounds, so I couldn't use it with all of my clothes...
UBG Striker - Looks good, easy on/off, just not sure if it's pulls the gun close to the body like the ST seems to. Also cant is not adjustable.
UBG Regulator - I like that it goes on the outside, no tight pants, but again not sure if it will print more because it's on the outside.
Don Hume H721 O.T. - I've read good reviews, drawback being that you have to thread the belt through it. I can't carry at work, so I have to remove it when I get there, which this one will be a pain in the rear.

I have a Serpa CQC BlackHawk paddle holster that just sticks out way too much. My other one is a ROG IWB, which digs into my side because it doesn't have a body guard and I hate that my sweat gets on the gun. It also can print a bit because of the belt loops and it slides around a bit. I like the IWB design, seems to be easier to conceal, but I will need to get slightly bigger/looser pants.

Can anyone else provide any other feedback or suggestions? Keep in mind that I have six kids all under the age of 11, so spending money of holsters is not something that I do lightly.

TIA!

I discovered the ultimate gun lube!

thelongone13 — Tue, 17 Nov 2009 07:12:47 GMT

It's a product called Castrol GTX 10W30... ;) Used it on the Mosin and that bolt FLIES. Glides like it's on air. My Marlin is smooth as glass now too. :twisted::twisted:

Looking for a shoulder holster.

krazykozmetics — Tue, 17 Nov 2009 03:25:09 GMT

So winter is upon us, i am looking for a comfortableshoulder holster. I bought one last year cant remember the brand but it was just nylon type straps and wasnt comfortable at all. I work on cars for a living, not sure if they make a shoulder rig that sits tight enough to wear at work. But if so that would be nice. But if not Im just looking for something that feels good. Im also a southpaw(lefty) so also limits my options. Thanks in advance, John

XD9 Service

RKirk — Mon, 16 Nov 2009 15:50:15 GMT

Holster problem. I have a Don Hume open top pancake holster. It is to tight after I belt it up. I have tried putting the pistol in a plastic bag to loosen the holster and using silicone to make it slick. But when the belt is tight the pistol is very difficult to draw. I have seen other pancake holsters with a built in curve and the slot wings bent. I am sure that helps. Can that be done with the Hume holster?

-- Richard

Newbie holster question

steve45 — Sun, 15 Nov 2009 04:52:16 GMT

I'm looking for a holster for my new 4" XD45 and I've found a used one online that says it's for a 4" Springfield XD 9/40, but I was thinking that I remembered reading somewhere that all the 4" frames were the same size? :confused:

Am I correct and will my XD45 fit this holster?

Serpa Holster for my XD Tactical

Pilotguy — Sun, 15 Nov 2009 04:36:08 GMT

Got one today at Woods and Water and man do I like it!

Which holster for XD9sc?

chemclay — Sat, 14 Nov 2009 21:28:40 GMT

interested in iwb carry

Tagua & Task Holsters

DLWXD40 — Sat, 14 Nov 2009 19:40:22 GMT

I am trying to find an alternate to the Don Hume OT Leather Belt Holster and I am wondering if anyone out there uses either one of these holsters below? If so, how well do they carry? Any complaints, praise, etc?

The Tagua Open Top Leather Holster is nearly identical to the Don Hume minus the body shield.

The Task OT Balistic Nylon Holster looks pretty good for a nylon holster with a deep setting compared to the leather holsters.

Both of these look like good holsters and are priced lower than the Don Hume but I wanted to see if I could get some feedback from someone before purchasing one.

Thanks.

Mag Pouch

whitewolf81 — Sat, 14 Nov 2009 18:55:29 GMT

Can anyone recommend any good mag pouches (single or double) for a XD45 to be used for competition?

Review: Tucker Gunleather Silent Thunder Holster & Mag Holder PICS

SWThomas — Sat, 14 Nov 2009 01:58:42 GMT

I was in the market for an OWB holster for my XD-M and had been searching without settling on anything. I saw someone post a pic of their Tucker Gunleather Silent Thunder holster they got for their Kimber 1911 and it looked like exactly what I was looking for. I checked out their site and emailed a few questions to Rob. I ended up going with them based on the info I got. I ordered the Silent Thunder Holster with a Double Kydex Mag Pouch. I understood it would take two weeks to get these items so that was no problem. Rob sent update emails when he received my order, when he was getting ready to ship, and also when he shipped the items. But for some reason when I emailed him about other things he wouldn't respond. I don't know what that's about... Maybe his Spam filter was blocking me or something...

I got the items today and I couldn't be happier. The holster is exactly what I wanted and looks to be quality made. The holster is specific to my pistol and fits it like a glove. Here's some pics with notes...

The items came in this bag with a label attached that contained my name and the specifics about my product...

Here's what all came in the bag. There's two allen wrenches for adjusting the holster and the mag pouch for tightness. One for each item...

Here's what they look like from the back. The belt mount is the size I specified when I ordered. I have a thick holster belt and wanted the mount to be a certain size to accomodate this. It fits my belt perfectly. And there's also adjustment screws on the belt mount to adjust cant. The mag pouch just has a simple clip as a belt mount which I also like...

You can see inside the holster that it is specifically formed to fit my XD-M 40. The holster is made of Kydex and then it has a leather lining on the inside attached with adhesive. I really liked the idea of the leather lining for a smoother draw, less noise, and less wear on my pistols finish...

Here's the inside of the mag pouch...

Here's what the bottom looks like and you can also see the adjustment screws...

The leather lining is branded with the Silent Thunder logo on the Bodyshield. The Bodyshield is an option that I chose so the gun wouldn't dig into my side as much. You can also get the holster without it...

Here's my XD-M installed in the holster and my mags in the mag pouch. I really like how it sits and how it feels on my belt...

CC holster recommendations

KEVWYO — Fri, 13 Nov 2009 07:57:40 GMT

Now that winter is upon me and I will be wearing bulkier clothes so CC will be easier. I would like recommendations for an IWB for a XD 45 tactical. It's the only pistol I own at the moment and while not ideal for CC it's obviously my only choice. Thanks.

PS ... if you were making a choice between an XD or XDM in .40 which would you choose for CC?

Are there any adjustible sights for XD40t?

MajesticPete — Fri, 13 Nov 2009 01:19:25 GMT

I didn't find any adjustible Trijicon or Mepros on their websites. Are there any adjustible sights for XD40t (preferably night sights)....?

Cdnn

mdbullet — Thu, 12 Nov 2009 23:43:02 GMT

Hello all, Last Saturday I bought a new XD9. I have not went to the range yet to break her in but I plan on doing that Saturday. Monday I decided to order 3 Mec-Gar mags from Cdnn. I got them today and I have to admit I like the way the black mags look instead of the shinny ones. I would have to give cdnn a A+ for fast shipping. Today was kinda like Christmas for me, first my mags came in from cdnn and then when I checked the mail the Pearce grip extensions I won on ebay for my new LCP came too. Be safe all, Dave

Holster for XD Subcompact with light/laser

reignman — Thu, 12 Nov 2009 18:38:08 GMT

Whats out there? anybody know of a good holster for a subcompact XD9 with say an x2 on it? My g/f loves carrying hers however that XD Gear has got to go. Im hoping to find a nice leather holster capable of carrying with a light or even a fobus style. Please, let me know.

Bluegrass Holsters???

sinkemlow — Thu, 12 Nov 2009 03:25:42 GMT

Anyone know the deal with Bluegrass Holsters lately. Tried to contact about a new shell for a Ghost Hybrid but get no response.

Viridian laser

KMFG — Wed, 11 Nov 2009 02:46:34 GMT

Does anyone know if Viridian makes their laser in either OD green or dark earth for the XD? I know they make an OD that fits Walther models, but that doesn't help me. I've tried to contact them via email and phone with no response. I really don't want to put a black housing laser on an OD or DE bi-tone weapon... would look

Cheap Leather Holster

lghovden06 — Tue, 10 Nov 2009 23:05:36 GMT

I am looking for a cheap leather holster for my springfield xd SC. I have seen Pro Carry holsters from the holsterstore.com. I was wondering if anyone has ever used these holsters and if they are any good or if you have any other suggestions?
Thank you

LaserMax Guidrod Laser Question

ThroatyStang — Tue, 10 Nov 2009 03:27:19 GMT

I just purchased a Galco summer holster and was wondering if I got the LaserMax Guiderod laser if I'm going to run into the problem of the laser activating its self while in the holster?

OWB for XD9SC

Keltyke — Mon, 09 Nov 2009 17:08:58 GMT

What's a good leather yaqui/speed scabbard OWB (left-handed) for the XD9SC? I'd like something that won't max out the ol' CC. TIA!

.357 conversion for XD40sc?

Sniperfox — Sun, 08 Nov 2009 15:23:12 GMT

Who makes the most reliable drop-in conversion barrel for the xd40sc to fire the .357sig cartridge? Is the barrel the only change that I would need to make?

I sure wish that SA would offer an XDsc model in .357. it would make things easier.

another holster thread, kydex scratch finish?

zlzgrom86 — Sun, 08 Nov 2009 05:50:42 GMT

Ok here are some questions:

I heard that kydex (spelling) scratches the black finish on the slide, is this true?

I also heard somewhere that with the MTAC holster you can't just pull the pistol straight out of the holster, that you must push in some other direction and then out to disengage it. Is this true?

Belts?

dazedkraut — Sun, 08 Nov 2009 00:34:58 GMT

I know this may sound stupid, but are any of you guys using a particular belt that is a bit more heavy duty than a normal one for CC? I have a jacket with an inside pocket that I usually use for CC, but now I am switching to IWB or OWB, and was wondering if there are better belts, or if it's pretty much just finding a good one at the store. Thanks for the input!

XD .40 shooting 9mm?

ssilicon — Sat, 07 Nov 2009 05:22:32 GMT

Here is the deal. I have a XD sub compact in .40. Can I swap in some parts and have a XD 9mm sub compact?

Are .40 mags and 9mm mags the same part?

What kind of barrel (and chamber) is required to make it work?

Will the striker still be properly centered on the smaller diameter 9mm rounds primer?

Assuming there are parts to do so, is it wise? Any problems?

Let's say no such products for sub compacts, it can be done in service or tactical right? Same extra questions apply to doing it on those paltforms too.

Raven Concealment?

jj79 — Sat, 07 Nov 2009 03:27:55 GMT

anybody use a Raven Concealment holster for your XD/XDm...?

likes? dislikes?

thanks in advance for all info...

-JJ

45c and 9sc IWB holster?

afcomm — Sat, 07 Nov 2009 00:06:08 GMT

Not to turn this into yet another MTAC vs. Supertuck thread, but next weekend I'll be purchasing a XD-9sc to go along with my XD-45 compact.

Right now, I plan on carrying both and need a IWB holster. My question is, will either of these models fit BOTH? Reliably (as in either model stays tight in the holster)? Money is tight, and I'd prefer to buy one holster instead of two?

I've been leaning towards the MTAC since the end is closed, but I'd appreciate input if anyone has first-hand experience with using one holster with a 45c and sc.

blackhawk serpa xdm/xd question

diskgolfer109 — Fri, 06 Nov 2009 21:41:46 GMT

I have a dm bullard dual carry that fits both my xdm and xd45c .it was made for xdm but fits both although cant get a good a grip on 45 working on surgery for that now but i want a OWB retention serpa does anyone know if 1 holster will fit both if i order for the larger (xdm) and still get the positive click retention or do i have to buy a seperate 1 4 each thanks

Attached light or handheld?

COB — Fri, 06 Nov 2009 08:14:09 GMT

Hello, just looking for some opinions on which is better. I saw a TLR-1 pistol light at the gun store for about $120 and heard good things about them. Are they any better than a handheld flashlight in the other hand?
I was thinking a bad guy may see the light and if they had a gun maybe they would shoot at the light which in turn may hit me. If you had a flashlight in the weak hand you could hold the flashlight above/away from you and still identify the target...
I bought an LED flashlight while I was there because I almost blinded myself with it :lol: but a part of me wants that TLR-1.. Guess the question is if the TLR-1 is worth it(usefull)? I can buy alot of ammo for that kind of cash

5.11 Operator belt

JonXD — Thu, 05 Nov 2009 22:04:33 GMT

Anyone use this for IWB carry? How does it hold up? My supertuck takes a 1.75 width and my current carry belt is 2 inch in width its basically a police duty belt. I think the 2 inch is too thick stiff and think that is I went to a 1.75 inch it would be much better. Would the operator belt be stiff enough to hold up the gun and keep it close to me while holding my pants up?

New Crimson Trace

crafter32034 — Thu, 05 Nov 2009 19:59:10 GMT

I took delivery of a new Crimson Trace laser sight yesterday. Apologies for the picture quality:oops:

It was simple to install. The entire process took less than 10 minutes

Then off to the range for zeroing. The master on/off switch is on the left side of the grip

After 75 rds through the XD, the sight has held true to my 15 yard setting.

IWB Holsters for XD9SC

njgibbs — Thu, 05 Nov 2009 13:54:40 GMT

So I have always been an OWB guy. However, it is getting difficult to effectively carry my new XD9SC on my hip without letting everyone i work with know. I know that the Supertuck is a favorite IWB on this forum but are there any other good ones? Is it possible to carry a XD9SC in an IWB holster in the small of my back (6 o'clock)?

I appreciate it!

Holster Question, but not which one to get

diskgolfer109 — Thu, 05 Nov 2009 02:13:32 GMT

Don't know if its the holster or how i wear it but, i cant seem to get a good grip when i draw from IWB. The problem comes i think with the body shield, the part that sticks up higher than the holster in back to keep from contact with your skin. I wear about 3 O'clock fairly tight with the belt and when i draw, especially if trying to do quickly I cant get my hand high enough for a solid grip. If i try to get my thumb wrapped around the grip while fully in the holster i'm only holding the bottom half or so, Its the xd.45c so grip is shorter anyway. the way i usually draw (probably not correct but its what i do:roll:)is almost like my hand is making "a gun",trigger finger pointing to the ground thumb pointing forward over the back of the slide and sliding my thumb around as it comes out of the holster which gives me a high enough grip to fire IF i had to but still 1/2 in mabe less of what would be a good high grip so i end up readjusting and sliding my hand up. Should i cut that part off or is it just something i'm doing wrong, like wearing it in wrong place or to tight. The holster is a D.M. Bullard dual carry and fits the gun great just not getting a positive grip Thanks

Bayonet on a pistol?

KMFG — Tue, 03 Nov 2009 17:28:57 GMT

This is crazy looking. LaserLyte : Rear Sight RL-1 : Laser Trainer Pro LT-PRO : Kryptonyte Gun Sight K-15 : North American Laser NAA-1 : Bayonet Green PB-1G : Bayonet Tan PB-1T : Bayonet Stainless PB-2 : Kryptonyte K-50

Sorry if its a re-post

Conversion barrel pros & cons

XDrocks! — Tue, 03 Nov 2009 03:11:08 GMT

I just picked up an XD-40 service. I'm looking for some opinions on a conversion barrel to 9mm. Is it as simple as a barrel swap? Can I use the OEM 40 guide rod & spring with the 9mm barrel? If not, what is a recommended guide rod and spring for basic target practice? Is there one particular brand of conversion barrel recommended? Any advice or comments would be greatly appreciated.

XD Gear flashlight holder

smarkwestman — Mon, 02 Nov 2009 22:57:14 GMT

Does anyone have any recommendations on which light to get for this little attachment. It came with my gun, I'd kinda like to set it up with a light. LOL

truglo sights-opinions?

sybo — Mon, 02 Nov 2009 19:15:20 GMT

Bought a XDSC .40 last week that the store installed these sights, are they crap or is it a crap-shoot like most all other things? SYBO:?:

Where to send

diskgolfer109 — Mon, 02 Nov 2009 13:37:24 GMT

Anyone reccomend a quality dependable place to send a couple xd and xdm slides to, to have night sights bought and installed? You know a reputable dealer where i can send and have back in a week at a reasonable price and have em be perfect. Really no shops around here to get it done and dont wanna risk screwing them up myself with improper tools. Whats a reasonable price and should i send em both in at once and be unarmed or send 1 and send other when it gets back Thanks 4 any input. also no holster problems to worry about with these sights are there??

Has anyone had any work done by Robar

jn_fsu — Sun, 01 Nov 2009 00:19:31 GMT

I recently read an article about a Khar .45 Robar customized( Robar Premium Finishing & Firearms Home Page ) so I started looking at what services they provide. I'm must say i'm very interested in having them customize one if not both of my pistols. But i'm doing some research first and trying get any feed back on there services, quality of work and craftsmanship. I appreciate any input you can share about this company and its product. I'm also interested in any other companies that offer similiar services.

Streamlight TRL-3

mdbullet — Sat, 31 Oct 2009 19:38:30 GMT

Hello all, Today I just bought a new TRL-3 for my XD-45. I have never owned a tac light before and I was wondering if anyone else was using one?. Thanks, Dave

XD3 picture by Mdbullet223_818 - Photobucket
XD2 picture by Mdbullet223_818 - Photobucket
XD1 picture by Mdbullet223_818 - Photobucket

Crossbreed 1911 & XD Owners

LoknLoadXD9 — Sat, 31 Oct 2009 03:43:18 GMT

Recently purchased a XD9 Service and was wondering about the fit of the SuperTuck compared to the 1911. I have a ST for my ProCarry II and had to bump up to a 34 waist for my Levi's in order to button and zip. The XD seems to be thicker than the Kimber and I don't know if the 34" will accommodate the wider XD. What was your experience? I think a 36" waist will be a bit much waistband and I don't want to start looking like those gangstas.

As my 1st & only IWB holster, I'm very pleased with the ST, but want some feedback from XD/ST owners who also carry a 1911. The MTAC looks to have a very similar setup as the ST for about the same price. I welcome opinions on this holster as well.

Lasermax internal guide rod laser Q?

akoba — Thu, 29 Oct 2009 17:58:05 GMT

To those have the lasermax, I need some info please.

After you change the switch and the laser guide rod, Can you still use the Original guide rod (factory supply) and shoot it without replacing the switch?

Original setup
Factory takedown lever + Original guide rod = Shoot's OK

modified setup
lasermax supplied switch + internal laser guide rod = Shoot's OK

Scenario #3
Lasermax supplied switch + Original guide rod = ???????

Reason i ask this is if this lasermax is really easy to use with or without changing a lot of internal parts?

thnx

Has Anyone Used The Sightmark Bore Laser Sight?

ThroatyStang — Thu, 29 Oct 2009 16:41:17 GMT

Looks like it would be the most accurate bore sight, any experiences? Sightmark 9mm Luger Pistol Laser Bore Sight - eBay (item 110449738039 end time Oct-31-09 18:04:27 PDT)

night sites or CT laser?

RocTrac — Thu, 29 Oct 2009 13:51:28 GMT

Looking for some options on these, I am leaning to the CT's. Opinions?
Thanks
Carl

XD9-sc convert 10-rd magazine to 13rd?

theg33k — Wed, 28 Oct 2009 01:14:19 GMT

So I got a killer deal on the California legal XD9-SC. I don't live in commie-land so I want to convert my magazine to the 13-round variety if possible. Does anyone have both magazines? Could you take it apart and see the differences? If it's just a spring I can buy a new one and be all set I would assume.

Sights for XDm

Cason — Tue, 27 Oct 2009 06:00:35 GMT

Ive been thinking about Heinie or Novak-style nightsights for my upcoming XDm purchase. What do you guys have and can you tell me what you think? How do they compare, in your mind, to just regular 'ole Trijicons? Thanks!

MTAC with XDm?

Cason — Tue, 27 Oct 2009 05:58:51 GMT

So Ive decided to try an XDm. I have a CompTac MTAC that I could buy another mount for. Anyone carry their XDm in an MTAC that can comment on the comfort?

Adjustable rear sight?

flycaster — Fri, 23 Oct 2009 15:08:53 GMT

Hi, boys and girls. I've put a lot of rounds through my XD9, and am now looking into an adjustable rear sight. Is there anything else out there besides the Dawsons? A search here came up pretty empty, and places like Midway don't have much. any suggestions?

Chuck

Just got my CrossBreed

theg33k — Thu, 22 Oct 2009 20:15:26 GMT

I've never CCed before but decided to once I got my XD9-sc. (Yes, I have my CWP) Picked up the crossbreed at the recommendation of a bunch of posters here and I have to say my first impressions are great. I was afraid it would be very uncomfortable but it's not at all.

Anyways.. some concerns I have

I tried holstering at several locations between 2:00 and 4:30 and you could still see the back of the slide printing on my (loose) t-shirt. I haven't tried adjusting the cant at all so hopefully that will help, suggestions are welcome.

One thing I've noticed for anyone considering CCW is that if you're like me and buy pants that are essentially fitted (so you don't have to wear a belt to keep them up all day) you may need to go up a size. Also, my current belt is "OK" but I can definitely see the need for a real gun belt. I may go with CrossBreed for that also since the service was so great.. but I'm going to shop around a little also.

Cheers,
G33k