Supertuck and chamber indicator.. - XDTalk Forums - Your HS2000/SA-XD Information Source!

phixion · 04-11-2008, 08:55 AM

I'm about to order a Crossbreed Supertuck based on the reviews I have read on the forums. When unholstering from the Supertuck, does it snag on the loaded chamber indicator?

ERRveneno · 04-11-2008, 09:01 AM

Quote:

Originally Posted by phixion

I'm about to order a Crossbreed Supertuck based on the reviews I have read on the forums. When unholstering from the Supertuck, does it snag on the loaded chamber indicator?

If there is a problem should be when returning your gun to the holster as the front face of the chamber load indicator will be raised enough to hit the holster side is not taking care, but unholstering would never be a problem.

this is a very nice holster, enjoy.

MonsterRain · 04-11-2008, 09:10 AM

Yea, the problem is just when holstering (but not really a problem when you get used to it). I still notice kydex shavings on my gun when I use the supertuck, but it has never caused a problem with drawing the weapon or anything else.

Phx-XD · 04-11-2008, 10:18 AM

I got my Supertuck about a month ago and mine has a raised channel in the kydex right where the loaded chamber indicator is. Don't know if this is a new addition or not, but I just tested mine and I wasn't able to get the indicator to touch the kydex at all either drawing or reholstering.

propellerhead · 04-11-2008, 10:38 AM

I just lean the pistol back when I reholster. No reason for concern.

**Edubya** · 04-11-2008, 04:41 PM

Quote:

Originally Posted by phixion

I'm about to order a Crossbreed Supertuck based on the reviews I have read on the forums. When unholstering from the Supertuck, does it snag on the loaded chamber indicator?

The chamber indicator slides in and out of the reverse dimple for the front sight to clear. The holster is not snug enough to cause excessive friction on anything, once you have started the draw. The thing is just unbelievably well designed. Just smooth as silk.

Like pulling silk stockings off of an overly pampered leg

tnroadrunner · 04-12-2008, 01:09 PM

What if you have XS Big Dot sights on an XD9 4 inch, is that a problem drawing and re-holstering?

04-11-2008, 08:55 AM	#1
phixion XDTalk Member Join Date: Jan 2008 Posts: 70	Supertuck and chamber indicator.. I'm about to order a Crossbreed Supertuck based on the reviews I have read on the forums. When unholstering from the Supertuck, does it snag on the loaded chamber indicator?

04-11-2008, 10:38 AM	#5
propellerhead XDTalk 3K Member Join Date: Apr 2006 Location: Foat Wurth, TX Posts: 3,232	I just lean the pistol back when I reholster. No reason for concern. __________________ XD Trifecta: XD-9 Tactical for practice & IDPA, XD-40 Subcompact for concealed carry, XD-45 Service for home defense. Three purposes, three calibers, three models. One gun.

04-12-2008, 01:09 PM	#7
tnroadrunner XDTalk 100 Member Join Date: May 2006 Location: Middle Tennessee Posts: 103	What if you have XS Big Dot sights on an XD9 4 inch, is that a problem drawing and re-holstering? __________________ Bob It's always a great day, If you don't believe me try missing one. NRA, TFA, IDPA, USPSA

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-11-2008, 09:10 AM	#3
MonsterRain XDTalk Member Join Date: Jan 2008 Location: Springfield, MO Posts: 39	Yea, the problem is just when holstering (but not really a problem when you get used to it). I still notice kydex shavings on my gun when I use the supertuck, but it has never caused a problem with drawing the weapon or anything else.

04-11-2008, 10:18 AM	#4
Phx-XD XDTalk Member Join Date: Feb 2008 Location: Chandler, AZ Posts: 40	I got my Supertuck about a month ago and mine has a raised channel in the kydex right where the loaded chamber indicator is. Don't know if this is a new addition or not, but I just tested mine and I wasn't able to get the indicator to touch the kydex at all either drawing or reholstering.