Crossbreed Super Tuck adjustable ride? - XDTalk Forums - Your HS2000/SA-XD Information Source!

ljaq516 · 03-23-2008, 12:16 PM

I am seriously contemplating a CBST as my choice of holster for my HK P7. I'm a thin, athletic build guy and I like my holsters to ride low with a very forward cant. I was wondering, yall CBST owners out there, if the ride of the holster can be adjusted to ride low. I'm sure the cant is easily adjustable. Thanks for the help.

p.s. very excited about the prospect of getting a crossbreed holster so please respond asap.

wickedtribe · 03-23-2008, 01:44 PM

I have mine set to ride very low with a slight cant, and it seems to ride well. There is plenty of additional leather above the pre-punched mounting holes, so if you have a punch you could customize it to ride any way you might like.

JBHorne · 03-23-2008, 02:17 PM

It can be adjusted to ride as low as you want. The problem is, if you set it too low, the kydex outer shell which presses against the inside of your pants will be below the rim of your pants. I personally feel that it is perfect the way it is. I am 6' 1" 160lbs and can even conceal my government 1911 quite easily (albeit heavy -- get a good gun belt).

If it were set any deeper, the muzzle would touch the bottom of my pants when I sit down and cause the gun to upholster, so it is actually quite deep the way it is!

I have my front clip set at the 3rd hold from the bottom and the rear on the 2nd hole. This provides slightly more front cant.

Trust me, trust everyone here, you will love it!

ljaq516 · 03-23-2008, 03:10 PM

alright i think I'm convinced that crossbreed is the one for me. It's so hard to find a p7 holster that doesn't take a year to make. thanks again guys!

03-23-2008, 12:16 PM	#1
ljaq516 XDTalk Member Join Date: Nov 2007 Posts: 38	Crossbreed Super Tuck adjustable ride? I am seriously contemplating a CBST as my choice of holster for my HK P7. I'm a thin, athletic build guy and I like my holsters to ride low with a very forward cant. I was wondering, yall CBST owners out there, if the ride of the holster can be adjusted to ride low. I'm sure the cant is easily adjustable. Thanks for the help. p.s. very excited about the prospect of getting a crossbreed holster so please respond asap. Last edited by ljaq516 : 03-23-2008 at 01:11 PM.

03-23-2008, 01:44 PM	#2
wickedtribe XDTalk Member Join Date: Mar 2008 Posts: 37	I have mine set to ride very low with a slight cant, and it seems to ride well. There is plenty of additional leather above the pre-punched mounting holes, so if you have a punch you could customize it to ride any way you might like. __________________ “The dumber people think you are, the more surprised they're going to be when you kill them” William Clayton

03-23-2008, 02:17 PM	#3
JBHorne XDTalk 500 Member Join Date: Nov 2007 Location: Tucson, AZ Posts: 931	It can be adjusted to ride as low as you want. The problem is, if you set it too low, the kydex outer shell which presses against the inside of your pants will be below the rim of your pants. I personally feel that it is perfect the way it is. I am 6' 1" 160lbs and can even conceal my government 1911 quite easily (albeit heavy -- get a good gun belt). If it were set any deeper, the muzzle would touch the bottom of my pants when I sit down and cause the gun to upholster, so it is actually quite deep the way it is! I have my front clip set at the 3rd hold from the bottom and the rear on the 2nd hole. This provides slightly more front cant. Trust me, trust everyone here, you will love it! __________________ I WOULD RATHER BE JUDGED BY 12 THAN CARRIED BY 6

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-23-2008, 03:10 PM	#4
ljaq516 XDTalk Member Join Date: Nov 2007 Posts: 38	alright i think I'm convinced that crossbreed is the one for me. It's so hard to find a p7 holster that doesn't take a year to make. thanks again guys!