- First Post: Sight Question
- "Attempted" my hand at gun smiting tonight...
- Is this carbon build up?
- Sight alignment options?
- Spare parts one should have on hand.
- Froglube + XD40 Tactical = Success
- XD-45 Jams
- XD45 Source for Stock Trigger
- XDM Gunsmith Near Seattle
- best sight pusher tool for the $
- Please help this dummy!!!
- Identifying PRP Striker spring
- New 9mm XDM and Handgun owner - Cleaning quesiton
- xd finish
- odd question...anyone here a self employed gunsmith?
- One Piece Stainless Guide Rod
- Lube in the striker channel
- XDs 45 to 9mm Conversion?
- I have enough rounds through my Xds it needs help
- Laquer stick
- XDM 3.8 Want Better Trigger Reset
- Bore Tech product?
- XDS Pinky Pickle (Confessions of a Glock Dude)
- Is this normal guide rod wear?
- Installed a reduced trigger/sear kit.
- I do all and trigger & sear wark on 1911's
- Porting my XDS barrel
- Did i do wrong?
- Light Primer Strikes with PRP Trigger?
- Questionable gunsmith.
- Stippling Show off
- Powder River Kit(s) ordered!
- Gunsmith in Austin area
- Clearing a squib
- Froglube'd
- XDM 3.8 .45 not returning back to battery
- Anyone use Mobil one synthetic bearing grease on their gun?
- Slide Catch is not Catching on empty magazine
- Just started using a new product great stuff
- Cleaning the Striker Channel?
- XD40SC Frustrations!
- XD and XD(m) captured springs, PITA
- bent guide rod
- Just discovered Ballistol
- Extractor help needed please.
- wolff rocks!
- Pit in Barrel of New Xdm
- XDm Frame Re-Assembly Question
- XD9 Lockup Live Round
- seer disassembly for detailed cleaning
- gunsmith cant do sights?
- spring kit for xd40sc
- Pistolsmith Recommendation
- Rust on ss slide
- New xd 9 user, trigger upgrade
- Broken barrel?
- Weak hand/strong hand firing
- XD40SC Issue
- Tungston guide rod test
- Polishing the trigger bar xd/xdm
- Take apart an XD video
- Duracoated or ceracoated XD
- Homebuilt Slide Racker
- sight pushers?
- MTM Case Guard Rifle Stand - Help
- What size punch is needed for XD9 service?
- Hoppe's Dispensing
- Suppressing an EFK 9mm conversion for XD-40 sc?
- New XD 45 compact help
- Need help
- XDM .40 3.8 Rear Sight Loose
- A solvent that won't hurt the polymer of my XD40
- PRP Ultimate Match Trigger Install :)
- XD 9 4" guide rod
- xd frames?
- Changing Calibers
- XDm9 Redoing or Removing Duracote
- Inner workings of the XD pistol?
- 38 Super in the XDm
- Removing the disassembler bar and lever
- First experience with Powder River Precision
- Wear on Guide Rod
- Tetra?
- How do I 'touch-up' dings on my firearm ? ?
- XD9 Question about the Roll Pin issue
- PRP Trigger Kit with Springer Trigger Bar
- Parkerizing my XD slide.
- A ? on cleaning.
- Magnetized slide
- Removing rust/pitting from older firearm.
- Any reports of problems with Fireclean?
- Is this possible?
- PRP Magazine Release Mod
- Lucas Oil Gun Oil
- correct way to use bronze brush inside barrel?
- Broken Trigger Bar Spring
- AGP Arms Mag Extension for XD9/40... Realiable??
- 3 dot sight XDm 5.25 coming soon
- 40 to 9 conversion
- Shock buffers
- Slide release extremely difficult
- One of those days...Help
- Drop-in vs Custom shop barrel for Supressor?
- I have a bone stock XD9 & XD40 and a $200ish budget
- XD 9mm sub compact, can I put a longer barrel in it?
- Froglube paste
- XDM Magazine Problem -- Help?
- When and why was the sear housing changed on the XDs?
- First mod to my xdm... grip stippling
- Frozen Froglube -- test
- Any thoughts or recommendations?
- Interchangable Slides?
- Locking Block Pin retainer?
- Flat wire recoil springs for XD45??
- Slide issue after cleaning
- NEED feedback from those who have sent their XDM's to SA or PRP for trigger work
- Hard Chroming Extractor?
- New PRP trigger kit
- XD40 subcompact feed problem
- Complete Takedown and Clean ?
- Trigger Options
- will polishing a barrel hurt it?
- Alabama Gunsmiths That Do Slide LIghting
- Remington Targetmaster System Universal Cleaning Kit
- Tools?
- Threaded barrel loosening up
- XD grip safety installation vid
- Hard Chrome Refinishing ?
- HS2000 Locking Block Chip
- Budget trigger kit (sear/springs)?
- Need help. FTF's and slide issues
- XDm 4.5 45 ACP Recoil Spring
- hoppes 9 bore solvent accident
- New pistol on order.
- help on slide component?
- Pistolgear.com is awesome
- I need my fellow firearm friends help on gun cleaning kits.
- Another barrel polishing question
- Springer precision trigger kit fitting (XD9)
- Hi new to here.
- Another gun lube question
- XD Parts
- XD40 Sub dent in brass
- Help reassembing sear
- FTF on brand new XDm
- Filing the front sight?
- Suggestions on how to Touch up dirty factory site?
- Stippling help please...
- Tula - Bad Primer and Hard Lockup
- Slide Insurance
- silicone based lube
- Dirty Brass
- Not crayon...
- Re-engraving a slide?
- xd40 (full size jams when pressing slide release lever
- Troubles with backstraps.
- Sonic Cleaner?
- Springfield Custom shop
- Ejector/Sear Spring pin moving on its own.
- Can't get my Striker Retainer Pin out
- slide stop spring
- Symptoms of worn guide rod?
- Not a good day working on XDM
- Lube question: KG 10 Moly Dri-Lube (or similar)
- help with prp drop kit
- Froglube
- PRP x-treme grip question
- Quick Polishing Question
- problem with prp kit
- Sub compact melt job
- polishing parts
- Frog lube installed
- My slide is stuck... Don's Guide rod need some help.
- weaponWORX XDm
- MFR-7 Lube?
- Gunsmith in the Southeast
- Oil, grease, or CLP to lubricate bore of XD40 subcompact?
- Xdm sight question
- PRP striker retainer pin.
- Rounding sharp corners of the rear sight
- What size punches are needed for the XD?
- xd9sc barrel in an xd40sc
- xdm 9mm 30rn mag
- HELP! Rear sight Issue on my new XD
- Spring guide rod scraping? New XDm .40
- Bushmaster XM15 eS2 barrel change out?
- Gun cleaning question
- replacement striker/firin pin
- Does the XD-9 work without the striker status indicator?
- Question for those who installed their PRP Ultimate Match trigger.
- storage
- Hard Chrome Locking Block/Trigger Pins
- 3-In-One as a gun lube
- Polishing Package arrived! ...And Slave Pin Question
- Mossberg 500 Field to HD Conversion
- If you polish your barrel.....
- lube on the striker
- PRP trigger kit help
- Sticky grip safety!!
- OEM Sear
- How often does the striker assembly need to be cleaned?
- how to change recoil springs?
- Duracoated my xdm
- PRP Ulimate Match Trigger question
- Help on control polishing
- Damaged Slide? XDm .45
- One arm shooter
- XD Carry Package Benefits
- Damaged Striker
- Punching - Does it marr pins?
- Wattage of soldering iron?
- WalMart find light pipes for sights
- Remove Engraving Coloring
- Mystery Tool?
- Cleaning the xd
- Tools for xdm trigger job???
- Does Gun Oil Have a Shelf Life
- M&P-Glock striker questions
- Oiling your rifle
- Dumb noob?
- Referral: SF Bay Area
- Safe to shoot?
- XD Armorer's Course
- Light Strikes
- Grip add-on
- DuraCoat Or DuraBake For A Carry Gun?
- First day shooting. What kind of upgrades are available?
- Whats The Easiest Way To Strip/Polish An XDM Barrel?
- What should i do before i shoot?
- Help! Is this rust?
- carb cleaner on revolver
- Hillwig Sight pusher tool (formerly Model and Tool) First set of sights replaced.
- Need help..were do i find guide rods
- Help w/ Deciding which PRP Trigger to Buy
- Proper cleaning of my XDM
- XD Armorer near Philadelphia?
- Magazine Maintenance?
- Prp drop in kit: Fine tuning vs reliability
- Customizing a Colt 1991 series 80
- Best solution to remove gunpowder on rail of xdm
- Gripwork Mod
- Off-center sights
- Good penetrating oil safe for use on guns?
- Discoloration inside barrel...help!
- Slide Help
- Cleaning do's and don'ts?
- Best Non-Toxic Cleaners
- Personalized / Name Engraved On The Slide
- Refinishing services with good prices
- Slide refinishing question.