How to make a home made sling - XDTalk Forums - Your HS2000/SA-XD Information Source!

cookieXD40 · 07-01-2008, 11:50 AM

do any of ya'll have any ideas or opinions to making your own Ar15 sling from like a 1 1/2 or 2 inch webbing??....i've been thinkin bout makin my own just haven't bought anything to do it with...just looking for opinions or ideas

Ajcrash · 07-01-2008, 11:59 AM

Over on Arfcom there is a how to. IIRC it ran about 11-12 bucks for the materials.

rockerz71 · 07-01-2008, 12:07 PM

AR15.COM :: Forums :: Topic :: Make your own TAC SLING for 10 bucks! Pics and detailed instructions inside 56k warning
I made this and use it with my AK

New2Arms · 07-01-2008, 12:44 PM

I used the plans above as well. I made a modification or two (I wasn't big on the double buckle) but it works really well and cost me about $14 or so in materials.

cookieXD40 · 07-01-2008, 12:52 PM

sweetness thanks guys

rockerz71 · 07-01-2008, 12:54 PM

I can't figure out the reason for the double buckle.

RobFMJ · 07-01-2008, 01:50 PM

Quote:

Originally Posted by rockerz71

AR15.COM :: Forums :: Topic :: Make your own TAC SLING for 10 bucks! Pics and detailed instructions inside 56k warning
I made this and use it with my AK

Jeez, I'd hate to try to use that thing as a shooting sling...

longtalltechsan · 07-01-2008, 02:24 PM

I made this sling but hated it. I then took all the materials and made my own and it works out fairly well.

cookieXD40 · 07-01-2008, 02:54 PM

not recommended...i just built it and its really uncomfortable i'm going to see if my G/F can sew on a pad kinna like a hunting rifle pad where it sits on my shoulder and stuff...it works just kinna uncomfortable

**SVThuh** · 07-01-2008, 03:06 PM

I just bit the bullet and bought a Vickers.. Couldnt be happier!!

07-01-2008, 11:50 AM	#1
cookieXD40 XDTalk 100 Member Join Date: Mar 2008 Location: Amarillo, Texas Posts: 275	How to make a home made sling do any of ya'll have any ideas or opinions to making your own Ar15 sling from like a 1 1/2 or 2 inch webbing??....i've been thinkin bout makin my own just haven't bought anything to do it with...just looking for opinions or ideas __________________ check out my myspace... http://www.myspace.com/eatin_smoke *XD 40 4" Service* Stoeger 12 gauge P350 old High Standard 20 Gauge old High Standard 22lr *16"M4 Del-ton rifle upper and a superior arms lower receiver with a center point v*ariable scope! NRA Member *Rules of EMS* 1. If you drop the baby, pick up the baby 2. All bleeding stops, eventually 3. Never go further into the scene than the first dead cop

07-01-2008, 11:59 AM	#2
Ajcrash XDTalk 1K Member Join Date: Aug 2006 Posts: 1,216	Over on Arfcom there is a how to. IIRC it ran about 11-12 bucks for the materials. __________________ "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps." Eleanor Roosevelt, 1945

07-01-2008, 12:44 PM	#4
New2Arms XDTalk 100 Member Join Date: Mar 2003 Posts: 185	I used the plans above as well. I made a modification or two (I wasn't big on the double buckle) but it works really well and cost me about $14 or so in materials. __________________ Never confuse paranoia with preparedness "You have a pistol to defend your life and home. Now get a rifle to defend your country." - Caribou

07-01-2008, 12:52 PM	#5
cookieXD40 XDTalk 100 Member Join Date: Mar 2008 Location: Amarillo, Texas Posts: 275	sweetness thanks guys __________________ check out my myspace... http://www.myspace.com/eatin_smoke *XD 40 4" Service* Stoeger 12 gauge P350 old High Standard 20 Gauge old High Standard 22lr *16"M4 Del-ton rifle upper and a superior arms lower receiver with a center point v*ariable scope! NRA Member *Rules of EMS* 1. If you drop the baby, pick up the baby 2. All bleeding stops, eventually 3. Never go further into the scene than the first dead cop

07-01-2008, 02:54 PM	#9
cookieXD40 XDTalk 100 Member Join Date: Mar 2008 Location: Amarillo, Texas Posts: 275	not recommended...i just built it and its really uncomfortable i'm going to see if my G/F can sew on a pad kinna like a hunting rifle pad where it sits on my shoulder and stuff...it works just kinna uncomfortable __________________ check out my myspace... http://www.myspace.com/eatin_smoke *XD 40 4" Service* Stoeger 12 gauge P350 old High Standard 20 Gauge old High Standard 22lr *16"M4 Del-ton rifle upper and a superior arms lower receiver with a center point v*ariable scope! NRA Member *Rules of EMS* 1. If you drop the baby, pick up the baby 2. All bleeding stops, eventually 3. Never go further into the scene than the first dead cop

07-01-2008, 12:07 PM	#3
rockerz71 XDTalk 3K Member Join Date: Nov 2006 Location: Norcross, GA Posts: 3,362	AR15.COM :: Forums :: Topic :: Make your own TAC SLING for 10 bucks! Pics and detailed instructions inside 56k warning I made this and use it with my AK

07-01-2008, 12:54 PM	#6
rockerz71 XDTalk 3K Member Join Date: Nov 2006 Location: Norcross, GA Posts: 3,362	I can't figure out the reason for the double buckle.

07-01-2008, 03:06 PM	#10
SVThuh XDTalk 1K Member Join Date: Feb 2008 Location: Southern California Posts: 1,042	I just bit the bullet and bought a Vickers.. Couldnt be happier!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode