laoding for the XD45 and OAL - XDTalk Forums - Your HS2000/SA-XD Information Source!

tnek · 08-13-2007, 05:04 PM

New XD owner here. I currently reload for my 1911's and was curious if anyone has had any issues with OAL in this gun. My stuff is all loaded to 1.25". 4gr of Clays under a MG 230 graind TMJ.

RobFMJ · 08-13-2007, 05:44 PM

I load my .45's (Rainer 230 gr. plated on 4 gr. Clays) to 1.275 OAL. More than enough room in the magazine, and no problems feeding.

**Straight-Shooter** · 08-13-2007, 06:04 PM

I load Oregan Trail Hard Cast RN using 5.7gr Unique and a OAL - 1.260

Jcobb · 08-13-2007, 06:56 PM

200 grain Precision RN, 5.0 grains Bullseye, OAL at about 1.245 and the rounds start not chambering fully for me.

08-13-2007, 05:04 PM	#1
tnek XDTalk Newbie Join Date: Aug 2007 Posts: 24	laoding for the XD45 and OAL New XD owner here. I currently reload for my 1911's and was curious if anyone has had any issues with OAL in this gun. My stuff is all loaded to 1.25". 4gr of Clays under a MG 230 graind TMJ.

08-13-2007, 05:44 PM	#2
RobFMJ XDTalk 1K Member Join Date: May 2006 Location: Galveston, Texas Posts: 1,955	I load my .45's (Rainer 230 gr. plated on 4 gr. Clays) to 1.275 OAL. More than enough room in the magazine, and no problems feeding. __________________ Eagles may soar, but weasels don't get sucked into jet engines.

08-13-2007, 06:04 PM	#3
Straight-Shooter XDTalk 500 Member Join Date: May 2006 Location: South Bend, Indiana Posts: 798	I load Oregan Trail Hard Cast RN using 5.7gr Unique and a OAL - 1.260 __________________ If you buy a glock, don't carry it on a boat. Look what happened to the Edmund Fitzgerald.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-13-2007, 06:56 PM	#4
Jcobb XDTalk 100 Member Join Date: Feb 2006 Posts: 145	200 grain Precision RN, 5.0 grains Bullseye, OAL at about 1.245 and the rounds start not chambering fully for me.