BEHOLD! The latest addition to my family! - Page 2 - XDTalk Forums - Your HS2000/SA-XD Information Source!

**einheit 13** · 04-09-2008, 07:55 PM

i linked K-Var because they offer the stocks in Warsaw length and NATO length (1.5" longer) and everyone gets the stuff from them. If you want a 'folder' look without it actually folding, try

ACE LTD. USA

and for more 'goodies'
BlackJack Buffers LLC

hardwarz · 04-11-2008, 08:09 AM

On my WASR, I took a sander and 120 grit. Once sanded lightly, I put red oak stain on it, followed by several coats of floor grade poly. (not spray on kind, I just don't think it's as durable or thick.

I'll have to get pictures soon.

Now that I think about it, I should have put something under the poly, like the hammer and sickle.

Something else that might have been cool to do would have been to burn a design into the wood before the poly.

Hardwarz

rockerz71 · 04-11-2008, 08:26 AM

I like the Tapco stuff, and I think they are in Kennesaw and IIRC you are in the atlanta area so you might be able to save on shipping. There are also usually people selling that kind of stuff at all the gun shows.

akuser47 · 04-14-2008, 09:25 PM

I personally like the grain pattern on that rifle of yours I would sand and refinish it before you go and spend alot on poly unless you really like that stuff. remember your cleaning kit won't have a rear stock compartment on most of those poly buttstocks. unless you get the newer one that does I think K-var makes it.

AZBill · 04-15-2008, 06:50 AM

Quote:

Originally Posted by hardwarz

Now that I think about it, I should have put something under the poly, like the hammer and sickle.

Hardwarz

Or better yet "2nd Amendment Edition"

d-rex · 04-18-2008, 09:25 AM

i have a couple wasr10s i went all tapco on one and really like it. the other one got an underfolder. thats a nice collection you got there.

Ishpeck · 04-18-2008, 11:21 AM

Quote:

Originally Posted by hardwarz

On my WASR, I took a sander and 120 grit. Once sanded lightly, I put red oak stain on it, followed by several coats of floor grade poly. (not spray on kind, I just don't think it's as durable or thick.

I'll have to get pictures soon.

*Taps foot impatiently.* Where are those pictures?

04-09-2008, 07:55 PM	#11
einheit 13 XDTalk 5K Member Join Date: Mar 2005 Location: Virginia, C.S.A. Posts: 5,494	i linked K-Var because they offer the stocks in Warsaw length and NATO length (1.5" longer) and everyone gets the stuff from them. If you want a 'folder' look without it actually folding, try ACE LTD. USA and for more 'goodies' BlackJack Buffers LLC __________________ Die Erde wird das sanfte erben! (the earth shall inherit the meek!) “It is the lack of will power, and not the lack of arms which render us incapable of offering any serious resistance.”

04-11-2008, 08:09 AM	#12
hardwarz XDTalk 100 Member Join Date: Mar 2007 Location: Ak-Rowdy, North side Summit County (Akron, OH) Posts: 347	On my WASR, I took a sander and 120 grit. Once sanded lightly, I put red oak stain on it, followed by several coats of floor grade poly. (not spray on kind, I just don't think it's as durable or thick. I'll have to get pictures soon. Now that I think about it, I should have put something under the poly, like the hammer and sickle. Something else that might have been cool to do would have been to burn a design into the wood before the poly. Hardwarz __________________ Always remember the Menendez brothers legal defense, "Sometimes I miss my mom, but then I reload." Last edited by hardwarz : 04-11-2008 at 08:40 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-11-2008, 08:26 AM	#13
rockerz71 XDTalk 2K Member Join Date: Nov 2006 Location: Norcross, GA Posts: 2,753	I like the Tapco stuff, and I think they are in Kennesaw and IIRC you are in the atlanta area so you might be able to save on shipping. There are also usually people selling that kind of stuff at all the gun shows.

04-14-2008, 09:25 PM	#14
akuser47 XDTalk Newbie Join Date: Sep 2007 Location: Ohio Posts: 17	I personally like the grain pattern on that rifle of yours I would sand and refinish it before you go and spend alot on poly unless you really like that stuff. remember your cleaning kit won't have a rear stock compartment on most of those poly buttstocks. unless you get the newer one that does I think K-var makes it.

04-18-2008, 09:25 AM	#16
d-rex XDTalk Newbie Join Date: Apr 2008 Location: northwest pa Posts: 14	i have a couple wasr10s i went all tapco on one and really like it. the other one got an underfolder. thats a nice collection you got there.