My first AK-47 Kit! (caution - several pics) - Page 4 - XDTalk Forums - Your HS2000/SA-XD Information Source!

ssilicon · 10-13-2008, 10:58 AM

Quote:

Originally Posted by colson

Hello
About my AK doubling...after returning to the range I fired about 35 rnds of "wolf" ammo and did not double. Before I was shooting "bear target ammo"...thought it could have made a difference.
Aftering returning to the range again it doubled again with the "wolf" ammo....What I have to do is not "feather" the trigger but pull and hold the trigger and release it?
Seems like a strange thing to have to do...I will do the 2 rnd. in clip thing and look!
thanks
Colson

You should check this page, especially the last trouble item and the proposed solutions. I know you may not have a Romanian AK but still, this is good info.

Romanian Kalashnikov Rifles

colson · 10-19-2008, 08:01 AM

Hello
Not sure what FCG stands for?....but I do not feel any "trigger slap" is there a "tune up" I can do on my trigger?
Colson

nalioth · 10-19-2008, 09:08 AM

Quote:

Originally Posted by colson

Hello
Not sure what FCG stands for?....but I do not feel any "trigger slap" is there a "tune up" I can do on my trigger?
Colson

FCG = Fire Control Group. This is the hammer, trigger, and disconnecter.

If you're not having "trigger slap", why would you want to "tune up" your trigger?

HTOWN stunna · 10-19-2008, 09:22 AM

ok i am no expert, i watched the AGI ak trigger job video a while back and did one on my wasr3. a week ago i watched the AR-15 AGI trigger job vid and had some problems with my FCG. the AGI guy said that ak and ar 15 triggers jobs are almost the same basic idea. (grinding/polishing areas) after doing my ar trigger job i would "feather" the trigger like you said releasing it very slowly and the hammer would drop, would not stay cocked, etc. sounds like you are having a disconnector problem, i took the dremel to the disconnect and voila problem fixed. again just a suggestion.

colson · 10-26-2008, 07:52 AM

Hi
Actually....when I "feather" the trigger is when it seemed to double.. but it happens so fast its hard to tell actually whats happening if I "slap" the trigger....when I do a "crisp" pull and hold the trigger back and release it is OK and the hammer does not drop and I hear the sear catch the hammer and hold.
But thanks for the info.
Colson

10-19-2008, 09:22 AM	#34
HTOWN stunna XDTalk 1K Member Join Date: Jan 2005 Location: Alpine Texas Posts: 1,593	ok i am no expert, i watched the AGI ak trigger job video a while back and did one on my wasr3. a week ago i watched the AR-15 AGI trigger job vid and had some problems with my FCG. the AGI guy said that ak and ar 15 triggers jobs are almost the same basic idea. (grinding/polishing areas) after doing my ar trigger job i would "feather" the trigger like you said releasing it very slowly and the hammer would drop, would not stay cocked, etc. sounds like you are having a disconnector problem, i took the dremel to the disconnect and voila problem fixed. again just a suggestion. __________________ The world is populated in the main by people who should not exist. - George Bernard Shaw

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-19-2008, 08:01 AM	#32
colson XDTalk Newbie Join Date: Sep 2008 Location: Illinois Posts: 6	Hello Not sure what FCG stands for?....but I do not feel any "trigger slap" is there a "tune up" I can do on my trigger? Colson

10-26-2008, 07:52 AM	#35
colson XDTalk Newbie Join Date: Sep 2008 Location: Illinois Posts: 6	Hi Actually....when I "feather" the trigger is when it seemed to double.. but it happens so fast its hard to tell actually whats happening if I "slap" the trigger....when I do a "crisp" pull and hold the trigger back and release it is OK and the hammer does not drop and I hear the sear catch the hammer and hold. But thanks for the info. Colson